View the manual for the Panasonic TX-65GZ950E here, for free. This manual comes under the category televisions and has been rated by 1 people with an average of a 5.6. This manual is available in the following languages: English. Do you have a question about the Panasonic TX-65GZ950E or do you need help? Ask your question here




Below you will find the product specifications and the manual specifications of the Panasonic TX-65GZ950E.







| Brand | Panasonic |
| Model | TX-65GZ950E | TX-65GZ950E |
| Product | television |
| EAN | 5025232892815 |
| Language | English |
| Filetype | User manual (PDF) |
| Display diagonal (metric) | 164 cm |
| Display diagonal | 65 " |
| HD type | 4K Ultra HD |
| Display resolution | 3840 x 2160 pixels |
| Display technology | OLED |
| Screen shape | Flat |
| Supported video modes | 2160p |
| Supported graphics resolutions | 3840 x 2160 |
| Display brightness | - cd/m² |
| Response time | - ms |
| Motion interpolation technology | - |
| Contrast ratio (typical) | - |
| Native aspect ratio | 16:9 |
| A | |
| Annual energy consumption | 203 kWh |
| Power consumption (average) | 146 W |
| 3D | No |
| Twin tuner | Yes |
| my Home Screen | Yes |
| Built-in speaker(s) | Yes |
| Hybrid Log-Gamma (HLG) | Yes |
| Quantity per pack | 1 pc(s) |
| Power consumption (standby) | 0.5 W |
| Power consumption (off) | 0.3 W |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Width (without stand) | 1449 mm |
| Depth (without stand) | 300 mm |
| Height (without stand) | 898 mm |
| Weight (without stand) | - g |
| Digital audio optical out | 1 |
| Headphone outputs | 1 |
| Common interface (CI) | - |
| Common interface Plus (CI+) | Yes |
| Common interface Plus (CI+) version | 1.4 |
| S-Video inputs quantity | - |
| HDMI ports quantity | 4 |
| PC in (D-Sub) | - |
| HDMI version | 2.1 |
| Audio Return Channel (ARC) | Yes |
| Mobile High-Definition Link (MHL) | - |
| HDCP | Yes |
| DVI port | - |
| DVI-D ports quantity | - |
| Ethernet LAN (RJ-45) ports | 1 |
| USB 2.0 ports quantity | 2 |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 1 |
| Component video (YPbPr/YCbCr) in | 1 |
| Composite video in | - |
| Voice control | Yes |
| Voice guide | Yes |
| Electronic Program Guide (EPG) | Yes |
| On Screen Display (OSD) | Yes |
| Number of OSD languages | 27 |
| Picture-in-Picture | - |
| Tuner type | Analog & digital |
| Analog signal format system | - |
| Digital signal format system | DVB-C, DVB-S2, DVB-T, DVB-T2 |
| Smart TV | Yes |
| Internet TV | Yes |
| Operating system installed | - |
| Screen mirroring | Yes |
| Hybrid Broadcast Broadband TV (HbbTV) | Yes |
| Smart modes | Cinema, Custom, Dynamic, Game, Normal, Personal, Photo, Sports, True Cinema, Vivid |
| Video apps | Amazon Prime Video, Netflix, YouTube |
| Number of speakers | 4 |
| RMS rated power | 50 W |
| Audio decoders | Dolby Atmos |
| Sound modes | Custom, Music, Speech, Standard |
| Wi-Fi | Yes |
| Ethernet LAN | Yes |
| Bluetooth | Yes |
| Bluetooth profiles | A2DP, HID, HOGP |
| Web browser | Yes |
| Product color | Black |
| On/off switch | - |
| VESA mounting | Yes |
| Teletext function | Yes |
| Teletext | 2000 pages |
| Image formats supported | JPEG |
| Audio formats supported | AAC, FLAC, MP3, WAV, WMA-PRO |
| Video formats supported | 3GPP, AVI, HEVC, M4V, MKV, MP4, PS, TS, VOB, VRO, WMV |
| Noise reduction | - |
| USB recording | No |
| Game mode | - |
| ConnectShare (HDD) | Yes |
| High Dynamic Range (HDR) supported | Yes |
| High Dynamic Range (HDR) technology | High Dynamic Range (HDR) 1500, High Dynamic Range 10+ (HDR10 Plus), Hybrid Log-Gamma (HLG) |
| Desktop stand | Yes |
| Handheld remote control | Yes |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Panasonic TX-65GZ950E below.
The ideal viewing distance for your Panasonic television depends on the screen size. As a rule of thumb you can assume that approximately 2.4 times the screen diagonal is the ideal viewing distance.
If your television has no signal, you can check the following: - Check whether your television is set to the correct source. - Check if your TV receiver is properly connected via the HDMI or SCART input.
The size of your television is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your television, so you measure the screen from bottom left to top right.
HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.
Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.
The screen size of the Panasonic TX-65GZ950E is 65 ".
The screen resolution of the Panasonic TX-65GZ950E is 3840 x 2160 pixels.
The display diagonal size of the Panasonic TX-65GZ950E is 65 inches (164 cm). This provides a large and immersive viewing experience for the user.
Yes, the Panasonic TX-65GZ950E supports 4K Ultra HD resolution (3840 x 2160 pixels), delivering crystal-clear picture quality and sharp details.
The Panasonic TX-65GZ950E utilizes OLED display technology, which offers deep black levels, vibrant colors, and wider viewing angles compared to traditional LCD displays.
The Panasonic TX-65GZ950E has a flat screen shape, providing a more traditional viewing experience without the distortions that can be associated with curved screens.
The Panasonic TX-65GZ950E has an annual energy consumption of 203 kWh and carries an energy efficiency class rating of A. This means it is energy-efficient and can save the user money on their electricity bills.
To access detailed information about the Panasonic TX-65GZ950E television, you can follow these steps: 1. Visit the Panasonic support website by typing the following URL in your web browser: [http://panasonic.jp/support/global/cs/tv/](http://panasonic.jp/support/global/cs/tv/) (English only). On this website, you will find comprehensive support information about the application, optional devices, and operation of the Panasonic TX-65GZ950E television. It provides detailed instructions and troubleshooting guides to help you make the most of your TV. Please note that the support website is available in English, and it is specifically designed to provide assistance for Panasonic TV models, including the TX-65GZ950E.
If the picture quality on your Panasonic TX-65GZ950E TV is not satisfactory, you can try the following steps to troubleshoot the issue: 1. Check the basic picture settings: Ensure that the Luminance Level, Backlight, Contrast, Brightness, and Color settings in the Picture Menu are not set to the minimum values. Adjust these settings to optimize the picture quality. (Page 344) 2. Verify cable connections: Make sure that all required cables and connections are firmly in place. Loose or faulty connections can affect the picture quality. (Page 344) 3. Reset channels: If the image appears blurry or distorted with no sound or low volume, try resetting the channels. This can help resolve any tuning or channel-related issues. (Page 345) 4. Check for short black images: Sometimes, a short black image may appear on the screen when the input signal changes. This is a normal behavior to avoid picture distortion. Wait for a moment to see if the picture quality improves. (Page 345) 5. Non-active pixels on the screen: If you notice white, red, blue, green, or black spots on the screen, please note that this is a characteristic of the panels and not a problem. The panel is built with high precision technology, and occasionally, a few non-active pixels may appear. This does not affect the performance of the panel. (Page 345) Please note that these troubleshooting steps are specific to the Panasonic TX-65GZ950E TV and can help address common picture quality issues.
The "Auto aspect" feature on the Panasonic TX-65GZ950E TV is designed to automatically adjust the aspect ratio of the screen to provide the best viewing experience. Here's how it works: 1. Access the Picture Menu: Press the "Menu" button on your remote control to open the main menu. 2. Navigate to the Aspect Control settings: Use the arrow keys on your remote control to highlight the "Picture" option in the menu. Then, navigate to the "Aspect Control" sub-menu. 3. Enable the Auto aspect feature: In the Aspect Control sub-menu, you will find the option to enable or disable the Auto aspect feature. Select the "Auto" option to activate it. 4. Enjoy optimized aspect ratio: Once the Auto aspect feature is enabled, the TV will automatically adjust the aspect ratio based on the content being displayed. This ensures that the picture fills the screen correctly, without any distortion or black bars. Please note that if you prefer to manually change the aspect ratio, you can do so by selecting the "Aspect" option in the Picture Menu and choosing the desired aspect ratio. By using the Auto aspect feature, you can ensure that the Panasonic TX-65GZ950E TV automatically adjusts the aspect ratio for an optimal viewing experience.
If the picture on your Panasonic TX-65GZ950E TV is black and white, you can try the following steps to troubleshoot the issue: 1. Check the picture settings: Ensure that the Luminance Level, Backlight, Contrast, Brightness, or Color settings in the Picture Menu are not set to the minimum values. Adjust these settings to improve the picture quality. (Page 345) 2. Verify cable connections: Make sure that all required cables and connections are firmly in place. Loose or faulty connections can affect the color reproduction. (Page 345) 3. Reset channels: If the black and white picture is observed on specific channels, try resetting the channels. This can help resolve any tuning or reception-related issues. (Page 348) 4. Check aerial position and weather conditions: Ensure that the aerial is properly positioned and connected. Weather conditions, such as heavy rain or snow, can affect signal reception and result in a black and white picture. (Page 348) 5. Contact local dealer or service provider: If the problem persists, despite the above steps, it is recommended to contact your local Panasonic dealer or service provider for further assistance. They can provide guidance and determine if additional services are required. (Page 348) Please note that these troubleshooting steps are specific to the Panasonic TX-65GZ950E TV and can help address common issues related to a black and white picture.
If there is no image displayed on your Panasonic TX-65GZ950E TV, you can try the following steps to troubleshoot the issue: 1. Check the picture settings: Ensure that the Luminance Level, Backlight, Contrast, Brightness, or Color settings in the Picture Menu are not set to the minimum values. Adjust these settings to improve the picture quality. (Page 345) 2. Verify cable connections: Make sure that all required cables and connections are firmly in place. Loose or faulty connections can result in no image being displayed. (Page 345) 3. Reset channels: If there is no image on specific channels, try resetting the channels. This can help resolve any tuning or reception-related issues. (Page 345) 4. Check for short black images: Sometimes, a short black image may appear on the screen when the input signal changes. Wait for a moment to see if the image appears after the adjustment. (Page 345) 5. Contact local dealer or service provider: If the problem persists, despite the above steps, it is recommended to contact your local Panasonic dealer or service provider for further assistance. They can provide guidance and determine if additional services are required. (Page 345) Please note that these troubleshooting steps are specific to the Panasonic TX-65GZ950E TV and can help address common issues related to no image being displayed.
Yes, the manual of the Panasonic TX-65GZ950E is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0