Panasonic TC-32LX600 manual

Panasonic TC-32LX600
6.8 · 1
PDF manual
 · 56 pages
English
manualPanasonic TC-32LX600
19

Advanced

Editing and Setting Channels
Apply
Caption detail
---
Caption select
Preset
Auto program
ANT In
Mode
Start scan
All
Cable
Edit
- - -
F
avorite
Apply
No
Add
Edit
CH
1
2
3
4
5
- - -
2
- - -
- - -
- - -
Favorite
Apply
- - -
- - -
- - -
- - -
Caption
No
Yes
No
No
No
Add
Apply
12
Favorite
Favorite
Signal meter
CH
Signal strength
Current
Peak level
85 %
85 %
2 - 1
Automatically searches and adds receivable channels to memory.
Select “ANT In”
Select “Mode”
Select “Start scan”
Favorite
Settings are made automatically
After completing the setting,
select “Apply”. (see below ).
All previously memorized
channels are erased.
set
select
start
select
Use this procedure when changing setting of receiving channels or changing the channel display.
Also, use to add or delete channels from channel list manually.
Select “Edit” Edit
Caption
select
next
select item to edit
(Caption/Favorite/Add)
next
Select the item to be edited
Caption Favorite
Add
Caption:
Changes the station identifier
Favorite:
Registers channel to Favorites List
Add:
Adds or deletes channels
Check the signal strength if interference is found or freezing occurs on a digital image.
change channel
ok
Signal intensity
Not available if “Cable” is selected in “ANT In”
(see above).
Effective only for digital antenna channels.
If the signal is weak, check the antenna.
If no problem is found, consult your
local dealer.
Select “Apply”
Press to move cursor to “Apply”
Add
Press “OK” button to select “Yes (add)” or “No
(delete)”
Select the number
Rename (maximum 7 characters available)
Select the station identifier
select
set/next
select
next
ok
(to enter your
program)
Note
Favorite
Caption detail
Preset
Select All or Analog
All: Analog and digital
Analog: Analog only
(Select Cable or Antenna)
If “Channel lock” (p. 16) is activated and “Auto”, “Manual” or “Signal meter” is selected, “Enter password.” will be displayed.

Manual

View the manual for the Panasonic TC-32LX600 here, for free. This manual comes under the category televisions and has been rated by 1 people with an average of a 6.8. This manual is available in the following languages: English. Do you have a question about the Panasonic TC-32LX600 or do you need help? Ask your question here

Need help?

Do you have a question about the Panasonic and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 2
C
CharlotteJune 13, 2023

How do I reprogram the original remote for TC-32LX600?

C
Courtney Mckoy August 13, 2023

How to turn it on manually

How to turn it on manually
zoom-in
View photo

Panasonic TC-32LX600 specifications

Below you will find the product specifications and the manual specifications of the Panasonic TC-32LX600.

The Panasonic TC-32LX600 is a television that offers a range of features for a high-quality viewing experience. With its sleek design and slim profile, it is aesthetically pleasing and can easily fit into any living space. Featuring a 32-inch display size, this television delivers clear and vibrant images with its HD resolution. The LED technology used in its display provides excellent brightness and color accuracy, enhancing the overall picture quality. Equipped with multiple connectivity options, the TC-32LX600 allows users to connect external devices such as gaming consoles, media players, or laptops easily. The HDMI ports enable seamless transmission of both high-definition video and audio signals. Additionally, the USB ports allow for convenient playback of multimedia content from compatible devices. Utilizing advanced audio technology, this television ensures a immersive sound experience. Its built-in speakers produce clear and balanced audio, delivering dialogue and music with precision. The TC-32LX600 also offers a variety of viewing modes and settings to optimize the picture according to user preferences. With features like picture mode, color temperature adjustment, and motion enhancement, this television provides flexibility in customizing the viewing experience to suit individual taste. Furthermore, the energy-efficient design of the TC-32LX600 helps reduce power consumption, allowing for cost savings and a reduced environmental impact. This television is designed to be long-lasting and reliable, ensuring years of enjoyment for its users.

General
BrandPanasonic
ModelTC-32LX600
Producttelevision
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Panasonic TC-32LX600 below.

What's the best viewing distance for my Panasonic television?

The ideal viewing distance for your Panasonic television depends on the screen size. As a rule of thumb you can assume that approximately 2.4 times the screen diagonal is the ideal viewing distance.

My television has no signal anymore, now what?

If your television has no signal, you can check the following: - Check whether your television is set to the correct source. - Check if your TV receiver is properly connected via the HDMI or SCART input.

What screen dimensions does my television have?

The size of your television is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your television, so you measure the screen from bottom left to top right.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

How do I turn on and off the Panasonic TC-32LX600 television?

To turn on the Panasonic TC-32LX600 television, follow these steps: 1. Locate the power button on the remote control. It is labeled as the "POWER" button. 2. Point the remote control towards the television's remote control sensor, which is located within about 23 feet (7 meters) in front of the TV set. 3. Press the "POWER" button on the remote control. The power indicator on the TV will turn on, indicated by a red light. To turn off the Panasonic TC-32LX600 television, follow these steps: 1. Locate the power button on the remote control. 2. Point the remote control towards the television's remote control sensor. 3. Press the "POWER" button on the remote control again. The power indicator on the TV will turn off, and there will be no light. Please note that the TV consumes some power as long as the power cord is inserted into the wall outlet.

Why is the power consumption of the TV higher than expected?

The power consumption of the Panasonic TC-32LX600 television may be higher than expected due to several factors. Here are some possible reasons: 1. Brightness Settings: Check if the brightness level of the TV is set too high. Lowering the brightness can help reduce power consumption. 2. Picture Mode: The TV may be set to a power-hungry picture mode, such as "Vivid" or "Dynamic." Switching to a more energy-efficient mode, like "Standard" or "Cinema," can help reduce power consumption. 3. Standby Mode: Make sure that the TV is not left in standby mode when not in use. In standby mode, the TV continues to consume a small amount of power. Turn off the TV completely when not in use. 4. Connected Devices: If there are external devices connected to the TV, such as gaming consoles or streaming devices, they may consume additional power. Disconnect any unnecessary devices when not in use. 5. Energy Saving Features: The TV may have energy-saving features that can be enabled. Check the settings menu for options like "Eco Mode" or "Power Saving" and activate them to reduce power consumption. By following these steps, you can optimize the power consumption of the Panasonic TC-32LX600 television and ensure it operates efficiently.

How do I change the aspect ratio of the TV screen?

To change the aspect ratio of the Panasonic TC-32LX600 television, follow these steps: 1. Press the "Menu" button on the remote control to access the menu options. 2. Use the arrow buttons on the remote control to navigate to the "Picture" menu. Press the "OK" button to select it. 3. Within the "Picture" menu, look for the option related to aspect ratio or screen size. The specific name of this option may vary depending on the TV's firmware version. 4. Once you have found the aspect ratio option, use the arrow buttons to select the desired aspect ratio. Common options include "Full," "Just," "4:3," and "Zoom." 5. After selecting the desired aspect ratio, press the "OK" button to confirm the changes. Please note that the available aspect ratio options may vary depending on the input signal and the content being displayed. It is recommended to choose the aspect ratio that best suits the content you are watching for optimal viewing experience.

Why is the sound not coming out of the built-in speakers?

There could be several reasons why the sound is not coming out of the built-in speakers of the Panasonic TC-32LX600 television. Here are some possible solutions: 1. Check the Volume: Ensure that the volume level is not set to zero or muted. Press the volume up button on the remote control to increase the volume. 2. Audio Output Settings: Verify that the TV's audio output settings are correctly configured. Press the "Menu" button on the remote control, navigate to the "Audio" menu, and check if the audio output is set to "Internal Speakers" or "TV Speakers." 3. External Audio Devices: If you have connected external audio devices, such as a soundbar or home theater system, make sure they are properly connected and powered on. Check the audio input settings on the external device to ensure it is receiving the audio signal from the TV. 4. Audio Cables: Check the audio cables connecting the TV to external audio devices. Ensure they are securely plugged in and not damaged. Try using different audio cables to rule out any cable issues. 5. Reset TV Settings: If none of the above steps work, you can try resetting the TV to its factory default settings. Press the "Menu" button, navigate to the "Setup" or "System" menu, and look for the "Reset" or "Restore Factory Settings" option. By following these steps, you can troubleshoot and resolve the issue of sound not coming out of the built-in speakers of the Panasonic TC-32LX600 television.

How do I connect external devices to the TV using the available connection terminals?

To connect external devices to the Panasonic TC-32LX600 television, follow these steps: 1. Identify the available connection terminals on the TV. These may include HDMI, component, composite, and audio input/output ports. 2. Determine the type of connection required for your external device. For example, if you want to connect a DVD player, you may use an HDMI or composite cable. 3. Locate the corresponding connection terminal on the TV and plug in the cable securely. Ensure that the cable is inserted into the correct port. 4. Connect the other end of the cable to the output port of your external device. Make sure the connection is secure. 5. If necessary, repeat the process for additional external devices, using different connection terminals on the TV. 6. Once all devices are connected, power on the TV and the external devices. 7. Use the TV's input/source button or menu to select the appropriate input source for the connected device. This will allow you to view and control the content from the external device on the TV. By following these steps, you can successfully connect external devices to the Panasonic TC-32LX600 television and enjoy their content on the TV screen.

Is the manual of the Panasonic TC-32LX600 available in English?

Yes, the manual of the Panasonic TC-32LX600 is available in English .

Is your question not listed? Ask your question here

No results