Panasonic SC-RT30 manual

Panasonic SC-RT30
7.9 · 2
PDF manual
 · 68 pages
English
manualPanasonic SC-RT30
2
RQT8672

Caution for AC Mains Lead

(For United Kingdom)
(“EB” area code model only)
For your safety, please read the following text carefully.
This appliance is supplied with a moulded three pin mains
plug for your safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the
replacement fuse has a rating of 5-ampere and that it is
approved by ASTA or BSI to BS1362.
Check for the ASTA mark Ï or the BSI mark Ì on the body
of the fuse.
If the plug contains a removable fuse cover you must ensure
that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a
replacement cover is obtained.
A replacement fuse cover can be purchased from your local
dealer.
If a new plug is to be fitted please observe the wiring code as
stated below.
If in any doubt please consult a qualified electrician.
IMPORTANT
The wires in this mains lead are coloured in accordance with
the following code:
Blue: Neutral, Brown: Live.
As these colours may not correspond with the coloured
markings identifying the terminals in your plug, proceed as
follows:
The wire which is coloured Blue must be connected to the
terminal which is marked with the letter N or coloured Black
or Blue.
The wire which is coloured Brown must be connected to the
terminal which is marked with the letter L or coloured Brown
or Red.
WARNING: DO NOT CONNECT EITHER WIRE TO THE
EARTH TERMINAL WHICH IS MARKED WITH THE
LETTER E, BY THE EARTH SYMBOL Ó OR COLOURED
GREEN OR GREEN/YELLOW.
THIS PLUG IS NOT WATERPROOF—KEEP DRY.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the type of AC
mains plug (figures A and B). Confirm the AC mains plug
fitted and follow the instructions below.
Illustrations may differ from actual AC mains plug.
1. Open the fuse cover with a screwdriver.
2. Replace the fuse and close or attach the fuse cover.
CAUTION!
IF THE FITTED MOULDED PLUG IS UNSUITABLE
FOR THE SOCKET OUTLET IN YOUR HOME THEN
THE FUSE SHOULD BE REMOVED AND THE PLUG
CUT OFF AND DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL
SHOCK IF THE CUT OFF PLUG IS INSERTED INTO
ANY 13-AMPERE SOCKET.
Fuse cover
Figure A Figure B
Figure A Figure B
Fuse
(5 ampere)
Fuse
(5 ampere)

CAUTION!

THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK
OR PRODUCT DAMAGE, DO NOT EXPOSE THIS
APPARATUS TO RAIN, MOISTURE, DRIPPING OR
SPLASHING AND THAT NO OBJECTS FILLED WITH
LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON
THE APPARATUS.

CAUTION!

DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE,
BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE.
ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT
RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO
OVERHEATING, ENSURE THAT CURTAINS AND ANY
OTHER MATERIALS DO NOT OBSTRUCT THE
VENTILATION VENTS.
DO NOT OBSTRUCT THE UNIT’S VENTILATION
OPENINGS WITH NEWSPAPERS, TABLECLOTHS,
CURTAINS, AND SIMILAR ITEMS.
DO NOT PLACE SOURCES OF NAKED FLAMES,
SUCH AS LIGHTED CANDLES, ON THE UNIT.
DISPOSE OF BATTERIES IN AN
ENVIRONMENTALLY FRIENDLY MANNER.
THIS UNIT IS INTENDED FOR USE IN MODERATE
CLIMATES. (67, Specifications–GENERAL)
This product may receive radio interference caused by
mobile telephones during use. If such interference is
apparent, please increase separation between the
product and the mobile telephone.
The socket outlet shall be installed near the equipment
and easily accessible or the mains plug or an appliance
coupler shall remain readily operable.
(
TV
)
AV1
(
EXT
)
AV2
(Back of product)
(Inside of product)
RT70-30.book Page 2 Thursday, April 13, 2006 1:45 PM

Manual

View the manual for the Panasonic SC-RT30 here, for free. This manual comes under the category hi-fi systems and has been rated by 2 people with an average of a 7.9. This manual is available in the following languages: English. Do you have a question about the Panasonic SC-RT30 or do you need help? Ask your question here

Need help?

Do you have a question about the Panasonic and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 2
M
Michael Opoku October 25, 2023

How to do search for new radio stations

M
Michael Opoku October 25, 2023

How to do search for new radio stations

Panasonic SC-RT30 specifications

Below you will find the product specifications and the manual specifications of the Panasonic SC-RT30.

The Panasonic SC-RT30 is a hi-fi system that offers audio playback capabilities. This system includes a CD player, FM tuner, and USB port for versatile music listening options. The SC-RT30 has a sleek black design with a compact footprint, making it suitable for various room sizes. The system comes with a remote control for easy operation from a distance. The speakers deliver clear sound quality, allowing listeners to enjoy their favorite music or radio stations with good audio fidelity. The SC-RT30 also features Bluetooth connectivity, enabling users to stream music wirelessly from their mobile devices. The system's overall power output and frequency response provide a satisfactory listening experience. The Panasonic SC-RT30 is a convenient and functional hi-fi system for individuals looking for a basic audio setup in their home.

General
BrandPanasonic
ModelSC-RT30
Producthi-fi system
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Panasonic SC-RT30 below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my hi-fi system?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

How can I change the settings of the Panasonic SC-RT30 hi-fi system for optimal performance?

To change the settings of the Panasonic SC-RT30 hi-fi system for optimal performance, follow these steps: 1. Adjust the Sound Field Control (SFC) by pressing the [SFC/EQ] button to select from options like FLAT, MOVIE, SPORTS, or MUSIC. 2. Modify the Equalizer (EQ) settings by pressing the [SFC/EQ] button to choose from settings like FLAT, HEAVY, CLEAR, SOFT, or MANUAL for manual adjustment of bass and treble. 3. Enable Center Focus by pressing the [C.FOCUS] button to enhance the sound from the center speaker. 4. Enhance the bass sound with H.Bass by pressing the [H.BASS] button to improve low-frequency sound clarity. 5. Activate Surround Enhancer by pressing [SRD ENH] to automatically adjust speakers for a surround sound effect. Ensure all speakers are at the same distance for optimal 5.1-channel sound and adjust speaker levels accordingly for balanced surround effects.

What are the video system specifications of the Panasonic SC-RT30 hi-fi system?

The video system specifications of the Panasonic SC-RT30 hi-fi system include the following details: - The system supports Dolby Digital Mode with specific RMS output power for different channels: Front (110 W per channel), Center (225 W), Surround (90 W per channel), and Subwoofer (225 W). - Total RMS Dolby Digital Mode Power is 850 W. - The system also has DIN Output Power specifications for Dolby Digital Mode. - The FM Tuner section has a frequency range of 87.50 to 108 MHz with 75 ohms unbalanced antenna terminals. - The system supports various recording formats for DVDs, including DVD-RAM, DVD-R, DVD-R DL, and DVD-RW. - It is important to note the audio recording system is Dolby Digital 2ch. - The system incorporates a Class 1 LASER Product with specific wavelengths for CDs and DVDs. - Progressive scanning is supported for high-resolution video playback. These specifications ensure a high-quality video experience with the Panasonic SC-RT30 hi-fi system.

How can I change the settings of the Panasonic SC-RT30 hi-fi system?

To change the settings of the Panasonic SC-RT30 hi-fi system, follow these steps: 1. Press [THEATER] on the remote control to operate the unit. 2. Select the DVD drive by pressing [DVD]. 3. While stopped, press [FUNCTIONS]. 4. Use [3,4] to select "To Others" and press [ENTER]. 5. Select "Setup" by pressing [3,4] and [ENTER]. 6. Choose the desired tab and menu options by navigating with [3,4] and confirming with [ENTER]. 7. To adjust speaker levels, select "Test" and set the level for each speaker using [3,4]. 8. To change delay time for center and surround speakers, select the delay time box, adjust with [3,4], and confirm with [ENTER]. 9. To finalize settings, select "Complete" and press [ENTER]. 10. Remember to press [RETURN] to go back or exit the screen as needed.

How do I set the clock on the Panasonic SC-RT30 hi-fi system?

To set the clock on the Panasonic SC-RT30 hi-fi system, follow these steps: 1. While the system is stopped, press [FUNCTIONS]. 2. Use the [3,4] buttons to select "To Others" and press [ENTER]. 3. Select "Setup" and press [ENTER]. 4. Choose "Others" and press [1]. 5. Select "Clock" and press [ENTER]. 6. Choose between "Off" or "Automatic" and press [ENTER]. 7. Use [3,4] to select the item to change (Hour, Minute, Second, Day, Month, Year). 8. Adjust the setting using [3,4] or the numbered buttons. 9. Press [ENTER] to save the settings. 10. The clock will start running. 11. To go back, press [RETURN], and to exit, press [RETURN] multiple times. Remember, if the automatic time correction function is on, the system will adjust the time based on TV station signals.

Is the manual of the Panasonic SC-RT30 available in English?

Yes, the manual of the Panasonic SC-RT30 is available in English .

Is your question not listed? Ask your question here

No results