Panasonic SC-BTT350 manual

Panasonic SC-BTT350
6.5 · 1
PDF manual
 · 52 pages
English
manualPanasonic SC-BTT350

Reference

43
VQT2W18
3D video is not output.
Are the settings on this unit and the TV correct? (> 26)
3D video is not output correctly as 2D.
Is the “Playback Method for 3D Disc” set to “2D Playback”?
(> 36)
Discs that have recorded titles with Side by side (2 screen
structure) which can be enjoyed in 3D are played back in
accordance with the settings of the TV.
No subtitles.
When progressive output is on, closed captions/subtitles
cannot be displayed.
The subtitles overlap closed captions recorded on discs.
Turn off the subtitles or turn off the closed caption setting on
the TV. (> 34)
A black band is displayed around the edge of the screen.
The aspect ratio of the screen is abnormal.
Confirm the “TV Aspect” is set properly. (> 37)
Adjust the aspect setting on the television.
(Adjustment using “Screen Aspect” (> 25) on the unit is also
possible.)
No sound.
Low volume.
Distorted sound.
Cannot hear the desired audio type.
Check connections to speakers and other equipment. (> 10,
11,13s18)
Ensure the speaker settings for your speakers are correct.
(> 40)
To output audio from a device connected with an HDMI cable,
set “HDMI Audio Output” to “On” in the Setup menu. (
>
38)
When “BD-Video Secondary Audio” is set to “On”, Dolby
TrueHD, Dolby Digital Plus, DTS-HD Master Audio and
DTS-HD High Resolution Audio are output as Dolby Digital or
DTS Digital Surround.
Re-master will not work when the bitstream signal is output
from the HDMI AV OUT terminal. (> 35)
Depending on the connected equipment, the sound may be
distorted if this unit is connected with an HDMI cable.
The multi-channel audio from a device connected to the TV
is not output in it’s original multi-channel form.
jIf the device has an optical audio output terminal, connect
the device to this unit’s “OPTICAL” terminal. (> 15, 29)
No surround sound.
Press [SURROUND] to select a surround effect. (> 23)
(When using the 7.1ch speaker system)
Audio is not available from the surround back speakers even
though Dolby Pro Logic II turns on.
Cannot switch audio.
When audio is output from the HDMI AV OUT terminal, set
“Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” to
“PCM”. (> 37)
No sound from the TV.
Press [EXT-IN] to select the corresponding source. (> 22)
The ARC (Audio Return Channel) function is not available.
Instead, use an optical digital audio cable or an audio cable
to have the TV sound. (> 14, 15)
If the TV is not ARC compatible and only the HDMI
connection is used, an extra audio connection is necessary
(> 14, 15).
Cannot charge or operate.
Check that the iPod/iPhone is connected firmly. (> 32)
The battery of the iPod/iPhone is depleted. Charge the iPod/
iPhone, and then operate again.
Cannot display iPod/iPhone videos/photos on the TV.
Make sure that TV is connected to the VIDEO OUT terminal
on this unit. (> 14)
Operate the iPod/iPhone menu to make the appropriate
video/photo output settings for your TV. (Refer to operating
instructions for your iPod/iPhone.)
The TV input channel unintentionally changes to HDMI
input.
When the main unit is connected with an “HDAVI Control”
compatible TV and VIDEO IN is selected for iPod/iPhone
video or photo playback, the TV input channel will
automatically change to the HDMI input channel when
[START] is pressed.
jRe-select the TV’s VIDEO IN input channel.
Distorted sound or noise is heard.
Adjust the position of the antenna.
Use an outdoor antenna. (> 13)
A beat sound is heard.
Try to keep a certain amount of distance between the
antenna and the TV.
I can’t connect to the network.
Confirm the network connection and settings. (> 16, 39)
Check the operating instructions for each device and
connect accordingly.
BD-Video or DVD-Video is not played.
Ensure the disc is for the correct BD-Video region code or
DVD-Video region number, and is not defective. (> 8)
You have set a ratings level to limit BD-Video or DVD-Video
play. Change this setting. (> 36)
Some BD-Video can only be output with HDMI.
I cannot play back BD-Live.
The SD card is write-protected. (> 9)
Confirm that this unit is connected to the broadband Internet.
(> 16)
Confirm the “BD-Live Internet Access” settings. (> 36)
Confirm an SD Card is inserted into the SD Card slot. (> 21)
Alternative soundtrack and subtitles cannot be selected.
The languages are not recorded on the disc.
You may not be able to use the playback menu to change the
soundtrack and subtitles on some discs. Use the disc’s
menus to make changes. (> 24)
Angle cannot be changed.
Angles can only be changed during scenes where different
angles are recorded.

Sound

iPod/iPhone operation

Radio

Network

Other difficulties with playback

SC-BTT750_350P_VQT2W18_eng.book 43 ページ 2010年6月21日 月曜日 午後4時51分

Manual

View the manual for the Panasonic SC-BTT350 here, for free. This manual comes under the category blu-ray players and has been rated by 1 people with an average of a 6.5. This manual is available in the following languages: English. Do you have a question about the Panasonic SC-BTT350 or do you need help? Ask your question here

Need help?

Do you have a question about the Panasonic and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Panasonic SC-BTT350 specifications

Below you will find the product specifications and the manual specifications of the Panasonic SC-BTT350.

General
BrandPanasonic
ModelSC-BTT350 | SC-BTT350
Productblu-ray player
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Panasonic SC-BTT350 below.

How do I connect the Panasonic SC-BTT350 blu-ray player to my TV?

To connect the Panasonic SC-BTT350 blu-ray player to your TV, follow these steps: 1. Turn on your TV and select the appropriate video input. Use the TV remote to navigate to the input where you want to connect the blu-ray player. 2. Press the power button ([Í]) on the Panasonic SC-BTT350 blu-ray player to turn it on. 3. Insert the media (such as a Blu-ray disc, DVD, CD, or SD card) that you want to play into the blu-ray player. 4. The playback will start automatically. If a menu is displayed, use the arrow buttons ([3], [4], [2], [1]) on the blu-ray player remote to select the desired item and press [OK] to confirm. 5. To navigate through menus, you can use the [TOP MENU/DIRECT NAVIGATOR] or [POP-UP MENU] button on the remote. Use the arrow buttons to select the item and press [OK] to confirm. 6. If you want to show the status messages while playing, press the [STATUS] button on the remote. Each press of the [STATUS] button will display different information about the playback. 7. To stop playback and preserve the blu-ray player's motor and your TV screen, press the [∫STOP] button when you finish watching. Remember, these steps are a general guide and may vary slightly depending on your specific TV model and setup.

Why is the Panasonic SC-BTT350 blu-ray player not playing the disc?

There could be several reasons why the Panasonic SC-BTT350 blu-ray player is not playing the disc. Here are some troubleshooting steps you can try: 1. Check the disc: Ensure that the disc is clean and free from scratches or smudges. If the disc is damaged, try playing a different disc to see if the issue persists. 2. Region compatibility: Verify that the disc you are trying to play is compatible with the region code of the blu-ray player. The Panasonic SC-BTT350 supports BD-Video discs marked with the region code A. 3. Firmware update: Make sure that you have the latest firmware installed on the blu-ray player. Firmware updates may address operating irregularities and improve compatibility with certain discs. Refer to the user manual or manufacturer's website for instructions on how to update the firmware. 4. Power cycle: Turn off the blu-ray player and unplug it from the power source for a few minutes. Then, plug it back in and turn it on again. This can help reset the player and resolve temporary issues. 5. Factory reset: If the above steps do not resolve the issue, you can try performing a factory reset on the blu-ray player. Refer to the user manual for instructions on how to restore the default settings. If the problem persists after trying these troubleshooting steps, it may be necessary to contact customer support for further assistance.

How do I resume playback from where I left off on the Panasonic SC-BTT350 blu-ray player?

To resume playback from where you left off on the Panasonic SC-BTT350 blu-ray player, follow these steps: 1. Press the [∫STOP] button on the blu-ray player remote to stop playback. The stopped position will be memorized. 2. When you want to resume playback, press the [1PLAY] button on the remote. The blu-ray player will restart from the position where you stopped. Please note that the resume play function may not work on BD-Video discs that include BD-J (interactive features). Additionally, if you open the tray or press the [∫STOP] button multiple times to display "STOP" on the unit's display, the position will be cleared. By following these steps, you can easily resume playback from where you left off on the Panasonic SC-BTT350 blu-ray player.

How do I search for a specific scene in a video on the Panasonic SC-BTT350 blu-ray player?

To search for a specific scene in a video on the Panasonic SC-BTT350 blu-ray player, follow these steps: 1. While playing the video, press the [SEARCH 6] or [SEARCH 5] button on the blu-ray player remote. This will activate the search function. 2. Use the [SEARCH 6] button to fast forward the video and the [SEARCH 5] button to rewind the video. Each press of the button will increase the speed of the search. 3. To slow down the search speed, press the [SEARCH 6] or [SEARCH 5] button again. Pressing the [1PLAY] button will revert to normal playback speed. 4. If you want to skip to a specific title, chapter, or track, press the [SKIP :] or [SKIP 9] button while the video is paused. Each press of the button will increase the number of skips. 5. To perform frame-by-frame search, press and hold the [2] (2;) or [1] (;1) button while the video is paused. This will allow you to move forward or backward frame by frame. By following these steps, you can easily search for a specific scene in a video on the Panasonic SC-BTT350 blu-ray player.

How do I change the audio language on the Panasonic SC-BTT350 blu-ray player?

To change the audio language on the Panasonic SC-BTT350 blu-ray player, follow these steps: 1. While playing a video, press the [DISPLAY] button on the blu-ray player remote. This will bring up the playback menu. 2. Use the arrow buttons ([3], [4], [2], [1]) on the remote to navigate through the menu options. Look for the "Soundtrack" or "Audio" option and press [OK] to select it. 3. Use the arrow buttons to select the desired audio language from the available options. Press [OK] to confirm your selection. 4. If the video has multiple audio tracks, you can switch between them by repeating step 3 and selecting a different language. 5. To exit the menu and resume playback, press the [DISPLAY] button again. By following these steps, you can easily change the audio language on the Panasonic SC-BTT350 blu-ray player. Please note that the availability of different audio languages may vary depending on the disc being played.

Is the manual of the Panasonic SC-BTT350 available in English?

Yes, the manual of the Panasonic SC-BTT350 is available in English .

Is your question not listed? Ask your question here

No results