Panasonic SC-BTT350 manual

Panasonic SC-BTT350
6.5 · 1
PDF manual
 · 52 pages
English
manualPanasonic SC-BTT350
Playback
25
VQT2W18

1 Press [SUB MENU].

2 Select an item and press [OK].

Depending on the played contents if you perform “Screen
Aspect”, there may be no effect.
When “TV Aspect” (> 37) is set to “4:3” or “4:3 Letterbox”,
the “Zoom” effect in “Screen Aspect” is disabled.
Depending on the media and contents, displayed items are different.
What is BONUSVIEW?
BONUSVIEW allows you to enjoy functions such as
picture-in-picture or secondary audio etc.
What is BD-Live?
In addition to the BONUSVIEW function, BD-Live allows you to
enjoy more functions such as subtitles, exclusive images and
online games by connecting this unit to the Internet.
The usable functions and the operating method may vary
with each disc, please refer to the instructions on the disc
and/or visit their website.
To turn on/off secondary video
1 Press [DISPLAY].
2 Press [3, 4] to select the “Disc” menu and press [1].
3 Press [3, 4] to select the “Signal Type” menu and press
[OK].
4 Press [3, 4] to select the “Video” under “Secondary
Video” menu and press [1].
5 Press [3, 4] to select the “On” or “Off”.
6 Press [RETURN] to exit.
A Secondary video
B Primary video
To turn on/off secondary audio
1 Press [DISPLAY].
2 Press [3, 4] to select the “Disc” menu and press [1].
3 Press [3, 4] to select the “Signal Type” menu and press
[OK].
4 Press [3, 4] to select the “Soundtrack” under “Secondary
Video” menu and press [1].
5
Press [
3
,
4
] to select the “On” or “Off”.
When “On” is selected, press [
1
] and then press [
3
,
4
] to
select the language.
6 Press [RETURN] to exit.
During search/slow-motion or frame-by-frame, only the primary video is
displayed.
When “BD-Video Secondary Audio” in “Digital Audio Output” is set to “Off”,
secondary audio will not be played (> 37).

Useful functions

While DIRECT NAVIGATOR screen is displayed
Properties
To display the titles properties (recording
date, etc.)
View
Chapters
To select the chapter
To picture Playing still pictures (> 27)
While playing
Screen
Aspect
When black bars are shown at the top,
bottom, left, and right sides of the screen, you
can enlarge the image to fill the screen.
Top Menu To display Top Menu.
Pop-up
Menu
To display Pop-up Menu.
Menu To display Menu.

Enjoying BD-Live or

BONUSVIEW in BD-Video

Playing picture-in-picture

SC-BTT750_350P_VQT2W18_eng.book 25 ページ 2010年6月21日 月曜日 午後4時51分

Manual

View the manual for the Panasonic SC-BTT350 here, for free. This manual comes under the category blu-ray players and has been rated by 1 people with an average of a 6.5. This manual is available in the following languages: English. Do you have a question about the Panasonic SC-BTT350 or do you need help? Ask your question here

Need help?

Do you have a question about the Panasonic and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Panasonic SC-BTT350 specifications

Below you will find the product specifications and the manual specifications of the Panasonic SC-BTT350.

General
BrandPanasonic
ModelSC-BTT350 | SC-BTT350
Productblu-ray player
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Panasonic SC-BTT350 below.

How do I connect the Panasonic SC-BTT350 blu-ray player to my TV?

To connect the Panasonic SC-BTT350 blu-ray player to your TV, follow these steps: 1. Turn on your TV and select the appropriate video input. Use the TV remote to navigate to the input where you want to connect the blu-ray player. 2. Press the power button ([Í]) on the Panasonic SC-BTT350 blu-ray player to turn it on. 3. Insert the media (such as a Blu-ray disc, DVD, CD, or SD card) that you want to play into the blu-ray player. 4. The playback will start automatically. If a menu is displayed, use the arrow buttons ([3], [4], [2], [1]) on the blu-ray player remote to select the desired item and press [OK] to confirm. 5. To navigate through menus, you can use the [TOP MENU/DIRECT NAVIGATOR] or [POP-UP MENU] button on the remote. Use the arrow buttons to select the item and press [OK] to confirm. 6. If you want to show the status messages while playing, press the [STATUS] button on the remote. Each press of the [STATUS] button will display different information about the playback. 7. To stop playback and preserve the blu-ray player's motor and your TV screen, press the [∫STOP] button when you finish watching. Remember, these steps are a general guide and may vary slightly depending on your specific TV model and setup.

Why is the Panasonic SC-BTT350 blu-ray player not playing the disc?

There could be several reasons why the Panasonic SC-BTT350 blu-ray player is not playing the disc. Here are some troubleshooting steps you can try: 1. Check the disc: Ensure that the disc is clean and free from scratches or smudges. If the disc is damaged, try playing a different disc to see if the issue persists. 2. Region compatibility: Verify that the disc you are trying to play is compatible with the region code of the blu-ray player. The Panasonic SC-BTT350 supports BD-Video discs marked with the region code A. 3. Firmware update: Make sure that you have the latest firmware installed on the blu-ray player. Firmware updates may address operating irregularities and improve compatibility with certain discs. Refer to the user manual or manufacturer's website for instructions on how to update the firmware. 4. Power cycle: Turn off the blu-ray player and unplug it from the power source for a few minutes. Then, plug it back in and turn it on again. This can help reset the player and resolve temporary issues. 5. Factory reset: If the above steps do not resolve the issue, you can try performing a factory reset on the blu-ray player. Refer to the user manual for instructions on how to restore the default settings. If the problem persists after trying these troubleshooting steps, it may be necessary to contact customer support for further assistance.

How do I resume playback from where I left off on the Panasonic SC-BTT350 blu-ray player?

To resume playback from where you left off on the Panasonic SC-BTT350 blu-ray player, follow these steps: 1. Press the [∫STOP] button on the blu-ray player remote to stop playback. The stopped position will be memorized. 2. When you want to resume playback, press the [1PLAY] button on the remote. The blu-ray player will restart from the position where you stopped. Please note that the resume play function may not work on BD-Video discs that include BD-J (interactive features). Additionally, if you open the tray or press the [∫STOP] button multiple times to display "STOP" on the unit's display, the position will be cleared. By following these steps, you can easily resume playback from where you left off on the Panasonic SC-BTT350 blu-ray player.

How do I search for a specific scene in a video on the Panasonic SC-BTT350 blu-ray player?

To search for a specific scene in a video on the Panasonic SC-BTT350 blu-ray player, follow these steps: 1. While playing the video, press the [SEARCH 6] or [SEARCH 5] button on the blu-ray player remote. This will activate the search function. 2. Use the [SEARCH 6] button to fast forward the video and the [SEARCH 5] button to rewind the video. Each press of the button will increase the speed of the search. 3. To slow down the search speed, press the [SEARCH 6] or [SEARCH 5] button again. Pressing the [1PLAY] button will revert to normal playback speed. 4. If you want to skip to a specific title, chapter, or track, press the [SKIP :] or [SKIP 9] button while the video is paused. Each press of the button will increase the number of skips. 5. To perform frame-by-frame search, press and hold the [2] (2;) or [1] (;1) button while the video is paused. This will allow you to move forward or backward frame by frame. By following these steps, you can easily search for a specific scene in a video on the Panasonic SC-BTT350 blu-ray player.

How do I change the audio language on the Panasonic SC-BTT350 blu-ray player?

To change the audio language on the Panasonic SC-BTT350 blu-ray player, follow these steps: 1. While playing a video, press the [DISPLAY] button on the blu-ray player remote. This will bring up the playback menu. 2. Use the arrow buttons ([3], [4], [2], [1]) on the remote to navigate through the menu options. Look for the "Soundtrack" or "Audio" option and press [OK] to select it. 3. Use the arrow buttons to select the desired audio language from the available options. Press [OK] to confirm your selection. 4. If the video has multiple audio tracks, you can switch between them by repeating step 3 and selecting a different language. 5. To exit the menu and resume playback, press the [DISPLAY] button again. By following these steps, you can easily change the audio language on the Panasonic SC-BTT350 blu-ray player. Please note that the availability of different audio languages may vary depending on the disc being played.

Is the manual of the Panasonic SC-BTT350 available in English?

Yes, the manual of the Panasonic SC-BTT350 is available in English .

Is your question not listed? Ask your question here

No results