Panasonic PT-RZ12K manual

Panasonic PT-RZ12K
7.6 · 1
PDF manual
 · 223 pages
English
manualPanasonic PT-RZ12K

Chapter 4Settings — [PICTURE] menu

ENGLISH - 89

Setting item Details
[BRIGHT SIGNAL LEVEL]
(Setting of the brightness level
of the signal to start the light
adjustment)
[6%] - [50%]
Adjusts the light source when the brightness level of the video
signal being input gets lower than the set value. The higher the
value, the larger the range to perform the light adjustment of the
light source.
Can be set in increments of 1 %. (Factory setting: 30 %)
[LIGHTS OUT TIMER]
(Time setting until the light turns
off)
[DISABLE] Does not turn off the light source.
[0.0s] - [10.0s]
Turns off the light source when the brightness level of the video
signal being input goes under the value set in [LIGHTS OUT
SIGNAL LEVEL].
Select an item from [0.0s] - [4.0s], [5.0s], [7.0s], or [10.0s]. [0.0s] -
[4.0s] can be selected in increments of 0.5.
[LIGHTS OUT SIGNAL
LEVEL]
(Setting of the brightness level
of the signal to turn off the light)
[0%] - [5%]
Set the level of the brightness of the video signal to turn off the light
source with [LIGHTS OUT TIMER].
Can be set in increments of 1 %. (Factory setting: 0 %)
[MANUAL INTENSITY]
(Manual light source
adjsutment)
[0] - [255]
The larger the value, the stronger the correction.
Can be set in increments of 1. (Factory setting: 255)
[DYNAMIC GAMMA]
(Adjustment of signal
compensation)
[OFF] Does not compensate the signal.
[1] Slightly compensates the signal.
[2] Moderately compensates the signal.
[3] Strongly compensates the signal.
[MULTI PROJECTOR SYNC]
Sets the contrast synchronization function.
This setting item is common with the following menu item.
f The [PROJECTOR SETUP] menu [MULTI PROJECTOR
SYNC]
Refer to the [PROJECTOR SETUP] menu [MULTI PROJECTOR
SYNC] (x page 140) for details.
Note
f [LIGHTS OUT SIGNAL LEVEL] cannot be set when [LIGHTS OUT TIMER] is set to [DISABLE].
f When [LIGHTS OUT TIMER] is set to anything other than [DISABLE], the following are the conditions to turn the light source back on again
from the state that the light source has turned off by this function.
g When the brightness level of the video signal being input has exceeded the value set in [LIGHTS OUT SIGNAL LEVEL]
g When the input signal is gone
g When on-screen display such as menu screen (OSD) or input guide, a test pattern, or a warning message is displayed
g When the operating environment temperature is around 0 °C (32 °F) and the light source is forced to turn on due to warm-up
f When the image of analog signal is projected, the image may be affected by the signal noise while the brightness level of the video signal is
detected. In this case, even when the brightness level of the image falls below the value set in [LIGHTS OUT SIGNAL LEVEL], it is judged
that the brightness level is not below the value as a signal.
Analog signal refers to Y/C signal, YC
B
C
R
/YP
B
P
R
signal, and analog RGB signal.
f When [DYNAMIC GAMMA] is set to [3], the contrast will be maximized.
f The brightness control function and the dynamic contrast function will operate simultaneously, but the dynamic contrast function will not
operate while measuring the brightness and the color.
f The contrast synchronization function is a function to display a combined screen with a balanced contrast by sharing the brightness level of
the video signal input to each projector when a multi-display is constructed by combining the projected image of multiple projectors.
f The [3D SYNC SETTING] setting is disabled and xed to [OFF] when [MULTI PROJECTOR SYNC] [MODE] is set to anything other than
[OFF].
f The following settings are disabled and the contrast synchronization function and shutter synchronization function cannot be used when [3D
SYNC SETTING] is set to anything other than [OFF].
g The [PICTURE] menu [DYNAMIC CONTRAST] [USER] [MULTI PROJECTOR SYNC]
g The [DISPLAY OPTION] menu [SHUTTER SETTING] [MULTI PROJECTOR SYNC]
g The [PROJECTOR SETUP] menu [MULTI PROJECTOR SYNC]

[SYSTEM SELECTOR]

The projector will automatically detect the input signal, but you can set the system method manually when an

unstable signal is input. Set the system method matching the input signal.

1) Press as to select [SYSTEM SELECTOR].

2) Press the <ENTER> button.

3) Press as to select a system format.

f Select the system format using asqw when the signal is input to the <SDI IN 1>/<SDI IN 2> terminals.

f Available system formats vary depending on the input signal.

Manual

View the manual for the Panasonic PT-RZ12K here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 7.6. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-RZ12K or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Panasonic and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
H
Hernán April 4, 2022

What is the sep chip used to connect the lamp and what is its name and where to buy?

What is the sep chip used to connect the lamp and what is its name and where to buy?
zoom-in
View photo
This message has been automatically translated

Panasonic PT-RZ12K specifications

Below you will find the product specifications and the manual specifications of the Panasonic PT-RZ12K.

The Panasonic PT-RZ12K is a video projector designed to deliver high brightness and exceptional image quality. With a brightness of 12000 ANSI lumens, this projector is suitable for large venues such as auditoriums, conference halls, and theaters, ensuring clear and vivid visuals even in well-lit environments. Featuring a native resolution of WUXGA (1920x1200), the PT-RZ12K delivers sharp and detailed images, making it ideal for presentations, movies, and gaming. The projector's 16:10 native aspect ratio and supported aspect ratios ensure compatibility with a wide range of content formats for versatile usage. Equipped with a contrast ratio of 20000:1, the PT-RZ12K produces deep blacks and vibrant colors, enhancing image depth and overall visual quality. Its dot clock scanning frequency of 162 MHz ensures smooth and flicker-free image reproduction. The projector comes with an air filter that helps maintain the optimal cooling performance, ensuring reliable and efficient operation. Additionally, its heat dissipation rate of 4096 BTU/h ensures effective cooling and prevents overheating, even during prolonged use. The PT-RZ12K offers high uniformity of 90%, ensuring consistent brightness distribution across the projection area. This feature is essential for achieving a well-balanced and immersive viewing experience. The projector includes a resource CD for easy installation and setup, providing users with the necessary software and documentation. With its premium build quality and attention to detail, the PT-RZ12K guarantees long-lasting performance and durability. In summary, the Panasonic PT-RZ12K video projector combines impressive brightness, excellent image resolution, and convenient features to deliver exceptional visual experiences in various professional settings.

General
BrandPanasonic
ModelPT-RZ12K | PT-RZ12KU
Productvideo projector
EAN5025232824137, 0885170246683
LanguageEnglish
FiletypeUser manual (PDF)
Projector
Projector brightness12000 ANSI lumens
Projection technology3-Chip DLP
Projector native resolutionWUXGA (1920x1200)
Contrast ratio (typical)20000:1
Native aspect ratio16:10
Supported aspect ratios16:10
Screen size compatibility70 - 1000 "
Vertical scan range24 - 120 Hz
Horizontal scan range15 - 100 kHz
Heat dissipation4096 BTU/h
Uniformity90 %
Keystone correction, horizontal-15 - 15 °
Keystone correction, vertical-40 - 40 °
Matrix size0.96 "
Packaging content
Resource CDYes
Handheld remote controlYes
Cables includedAC
Batteries includedYes
Features
Dot clock scanning frequency162 MHz
Air filterYes
2D/3D frequency image120 Hz
Noise level43 dB
HDCPYes
Design
Housing materialPlastic
Product typeCeiling / Floor mounted projector
Product colorBlack
Market positioning-
PlacementCeiling, Floor
Lens system
Focal length range- mm
Vertical lens shift range-55 - 55 %
Horizontal lens shift range-20 - 20 %
Display
Built-in displayNo
Power
Power sourceAC
Power consumption (standby)4 W
Power consumption (max)1200 W
Power consumption (typical)800 W
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (economy mode)620 W
Multimedia
Built-in speaker(s)No
Light source
Service life of light source20000 h
Service life of light source (economic mode)24000 h
Lamps quantity1 lamp(s)
Light source typeLaser
Video
Analog signal format systemNTSC, PAL, SECAM
Full HDYes
3DYes
Supported video modes480i, 480p, 720p, 1080i, 1080p
Ports & interfaces
VGA (D-Sub) ports quantity1
HDMI ports quantity1
Component video (YPbPr/YCbCr) in1
Composite video in0
DVI portYes
USB 2.0 ports quantity0
Audio (L/R) in0
S-Video inputs quantity0
AC (power) inYes
BNC input ports2
Remote (IR) output1
Serial interface typeRS-232
Network
Ethernet LAN (RJ-45) ports1
Smart TV-
Ethernet LANYes
Wi-FiNo
Ethernet LAN data rates10, 100 Mbit/s
Other features
RS-232 ports2
Operational conditions
Operating temperature (T-T)0 - 50 °C
Operating relative humidity (H-H)10 - 80 %
Weight & dimensions
Weight44000 g
Width578 mm
Depth740 mm
Height323.5 mm
Package weight53400 g
Package width824 mm
Package depth964 mm
Package height399 mm
Storage
Card reader integratedNo
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Panasonic PT-RZ12K below.

What is the weight of the Panasonic PT-RZ12K?

The Panasonic PT-RZ12K has a weight of 44000 g.

What is the height of the Panasonic PT-RZ12K?

The Panasonic PT-RZ12K has a height of 323.5 mm.

What is the width of the Panasonic PT-RZ12K?

The Panasonic PT-RZ12K has a width of 578 mm.

What is the depth of the Panasonic PT-RZ12K?

The Panasonic PT-RZ12K has a depth of 740 mm.

Is the manual of the Panasonic PT-RZ12K available in English?

Yes, the manual of the Panasonic PT-RZ12K is available in English .

Is your question not listed? Ask your question here

No results