Chapter 3Basic Operations — Operating with the remote control
ENGLISH - 75
Using the AC voltage monitor function
The value of input supply voltage can be displayed on the self-diagnosis display at the side of the projector.
r To display during projection
1) Press the power on <b> button.
fThe value of the input supply voltage is displayed only as numeric value on the self-diagnosis display.
fThe display will turn off automatically after approximately 3 seconds.
r To display during standby mode
1) Press the power standby <v> button.
fThe value of the input supply voltage is displayed only as numeric value on the self-diagnosis display.
fThe display will turn off automatically after approximately 3 seconds.
Note
fIt can be set using the [PROJECTOR SETUP] menu → [AC VOLTAGE MONITOR] (x page 147).
fThe value of input supply voltage cannot be displayed in the self-diagnosis display during standby when the [PROJECTOR SETUP] menu
→ [STANDBY MODE] (x page 136) is set to [ECO].
fOperation can also be performed by the power on <b> button or power standby <v> button on the control panel.
Setting ID number of the remote control
When you use the multiple projectors together, you can operate all the projectors simultaneously or each projector
individually using a single remote control, if a unique ID number is assigned to each projector.
After setting the ID number of the projector, set same ID number on the remote control.
The factory default ID number of the projector is set to [ALL]. When using a single projector, press the <ID
ALL> button on the remote control. Also, you can control a projector by pressing the <ID ALL> button on
the remote control even if you do not know the projector ID.
button
1) Press the <ID SET> button on the remote control.
2) Within five seconds, press and set the one-digit or two-digit ID number set on the projector body
using the number (<0> - <9>) buttons.
fIf you press the <ID ALL> button, you can control the projectors regardless of the ID number setting of the
projector body.
Attention
fSince the ID number of the remote control can be set without the projector body, do not press the <ID SET> button on the remote control
carelessly. If the <ID SET> button is pressed and no number (<0> - <9>) buttons are pressed within ve seconds, the ID number returns to
its original value before the <ID SET> button was pressed.
fThe ID number set on the remote control will be stored unless it is set again. However, it will be erased if the remote control is left with dead
batteries. Set the same ID number again when the batteries are replaced.
Note
fWhen the ID number of the remote control is set to [0], you can control the projector regardless of the ID number setting of the projector
body, as same as when [ALL] is set.
fSet the ID number of the projector body from the [PROJECTOR SETUP] menu → [PROJECTOR ID].
Manual
View the manual for the Panasonic PT-RZ12K here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 7.6. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-RZ12K or do you need help? Ask your question here
Do you have a question about the Panasonic and is the answer not in the manual?
Receive updates on solutions
Get answers to your question
Question and answer
Number of questions: 1
H
Hernán April 4, 2022
What is the sep chip used to connect the lamp and what is its name and where to buy?
View photoThis message has been automatically translated
Panasonic PT-RZ12K specifications
Below you will find the product specifications and the manual specifications of the Panasonic PT-RZ12K.
The Panasonic PT-RZ12K is a video projector designed to deliver high brightness and exceptional image quality. With a brightness of 12000 ANSI lumens, this projector is suitable for large venues such as auditoriums, conference halls, and theaters, ensuring clear and vivid visuals even in well-lit environments.
Featuring a native resolution of WUXGA (1920x1200), the PT-RZ12K delivers sharp and detailed images, making it ideal for presentations, movies, and gaming. The projector's 16:10 native aspect ratio and supported aspect ratios ensure compatibility with a wide range of content formats for versatile usage.
Equipped with a contrast ratio of 20000:1, the PT-RZ12K produces deep blacks and vibrant colors, enhancing image depth and overall visual quality. Its dot clock scanning frequency of 162 MHz ensures smooth and flicker-free image reproduction.
The projector comes with an air filter that helps maintain the optimal cooling performance, ensuring reliable and efficient operation. Additionally, its heat dissipation rate of 4096 BTU/h ensures effective cooling and prevents overheating, even during prolonged use.
The PT-RZ12K offers high uniformity of 90%, ensuring consistent brightness distribution across the projection area. This feature is essential for achieving a well-balanced and immersive viewing experience.
The projector includes a resource CD for easy installation and setup, providing users with the necessary software and documentation. With its premium build quality and attention to detail, the PT-RZ12K guarantees long-lasting performance and durability.
In summary, the Panasonic PT-RZ12K video projector combines impressive brightness, excellent image resolution, and convenient features to deliver exceptional visual experiences in various professional settings.
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 1What is the sep chip used to connect the lamp and what is its name and where to buy?