Review the following points. For details, see the corresponding pages.
ProblemsPoints to be checkedPage
Power does not turn on.
fIs the power plug rmly inserted into the outlet?―
fIs the <MAIN POWER> switch set to <OFF>?64
fIs the wall outlet supplying electricity?―
fHave the circuit breakers tripped?―
fAre the light source indicators <LIGHT1>/<LIGHT2> or the temperature indicator
<TEMP> lighting or blinking?
186
No image appears.
fAre connections to external devices correctly performed?48
fIs the input selection setting correct?71
fIs the [BRIGHTNESS] adjustment setting at a minimum?84
fIs the external device that is connected to the projector working properly?―
fIs the shutter function in use?72
fIf the power indicator <ON (G)/STANDBY (R)> is blinking in red, consult your dealer.―
fIs the lens cover still attached to the lens?56
Image is fuzzy.
fIs the lens focus set correctly?65
fIs the projection distance appropriate?35
fIs the lens dirty?22
fIs the projector installed perpendicular to the screen?―
Color is pale or grayish.
fAre [COLOR] and [TINT] adjusted correctly?84
fIs the external device connected to the projector adjusted correctly?48
fIs the RGB cable damaged?―
Remote control does not
respond.
fAre the batteries depleted?―
fIs the polarity of the batteries set correctly?31
fAre there any obstructions between the remote control and the remote control
signal receiver of the projector?
26
fIs the remote control being used beyond its effective operation range?27
fAre other forms of light, such as uorescent light, affecting the projection?27
fIs the [REMOTE CONTROL] setting in [CONTROL DEVICE SETUP] set to
[DISABLE]?
157
fIs the <REMOTE 2 IN> terminal used for contact control?207
fIs the ID number setting operation correct?75
Menu screen does not
appear.
fIs the on-screen display function turned off (hidden)?119
Buttons on the control
panel do not operate.
fIs the [CONTROL PANEL] setting in [CONTROL DEVICE SETUP] set to
[DISABLE]?
157
fIs the <REMOTE 2 IN> terminal used for contact control?207
Image does not display
correctly.
fIs the [SYSTEM SELECTOR] selection set correctly?89
fIs the [RGB1 INPUT SETTING] setting made correctly?113
fIs there a problem with the video tape or other image sources?―
fIs a signal which is not compatible with the projector being input?210
Image from a computer
does not appear.
fIs the cable too long? (For D-Sub cables, the cable length should be 10 m (32'10")
or shorter.)
―
fIs the external video output on the laptop computer set correctly? (Ex.: The external
output settings may be switched by pressing the “Fn” + “F3” or “Fn” + “F10”
simultaneously. Since the method varies depending on the computer type, refer to
the user manual provided with your computer.)
―
Image output from DVI-D
of the computer does not
appear.
fIs the [EDID SELECT] setting in [DVI-D IN] set to [EDID3] or [EDID2:PC]?114
fThe graphics accelerator driver of the computer may need to be updated to the
latest version.
―
fThe condition may be improved by making the [EDID SELECT] setting in [DVI-D IN]
and then restarting the computer.
114
Video from HDMI
compatible device does
not appear or it appears
jumbled.
fIs the HDMI cable connected securely?48
fTurn the power of the projector and the external device off and on.―
fIs a signal which is not compatible with the projector being input?210
Lens shift cannot be
adjusted.
fPerform [LENS CALIBRATION].144
fIs the Fixed-focus Lens (Model No.: ET-D75LE50) attached?―
Manual
View the manual for the Panasonic PT-RZ12K here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 7.6. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-RZ12K or do you need help? Ask your question here
Do you have a question about the Panasonic and is the answer not in the manual?
Receive updates on solutions
Get answers to your question
Question and answer
Number of questions: 1
H
Hernán April 4, 2022
What is the sep chip used to connect the lamp and what is its name and where to buy?
View photoThis message has been automatically translated
Panasonic PT-RZ12K specifications
Below you will find the product specifications and the manual specifications of the Panasonic PT-RZ12K.
The Panasonic PT-RZ12K is a video projector designed to deliver high brightness and exceptional image quality. With a brightness of 12000 ANSI lumens, this projector is suitable for large venues such as auditoriums, conference halls, and theaters, ensuring clear and vivid visuals even in well-lit environments.
Featuring a native resolution of WUXGA (1920x1200), the PT-RZ12K delivers sharp and detailed images, making it ideal for presentations, movies, and gaming. The projector's 16:10 native aspect ratio and supported aspect ratios ensure compatibility with a wide range of content formats for versatile usage.
Equipped with a contrast ratio of 20000:1, the PT-RZ12K produces deep blacks and vibrant colors, enhancing image depth and overall visual quality. Its dot clock scanning frequency of 162 MHz ensures smooth and flicker-free image reproduction.
The projector comes with an air filter that helps maintain the optimal cooling performance, ensuring reliable and efficient operation. Additionally, its heat dissipation rate of 4096 BTU/h ensures effective cooling and prevents overheating, even during prolonged use.
The PT-RZ12K offers high uniformity of 90%, ensuring consistent brightness distribution across the projection area. This feature is essential for achieving a well-balanced and immersive viewing experience.
The projector includes a resource CD for easy installation and setup, providing users with the necessary software and documentation. With its premium build quality and attention to detail, the PT-RZ12K guarantees long-lasting performance and durability.
In summary, the Panasonic PT-RZ12K video projector combines impressive brightness, excellent image resolution, and convenient features to deliver exceptional visual experiences in various professional settings.
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 1What is the sep chip used to connect the lamp and what is its name and where to buy?