fWhen [CONSTANT MODE] in [BRIGHTNESS CONTROL SETUP] is set to anything other than [OFF], the
brightness and white balance of light source at the time when the <ENTER> button is pressed is recorded
as the standard brightness and white balance.
fIf the <ENTER> button is pressed when [LINK] is set from [GROUP A] to [GROUP D], the group name is
displayed on the screens of projectors that have been set in the same group.
LINKGROUP A
15) When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.
Note
fWhen [CONSTANT MODE] in [BRIGHTNESS CONTROL SETUP] is set to [AUTO] or [PC], keep the shutter function disabled (shutter:
open) for at least two minutes to perform the brightness sensor calibration after the [BRIGHTNESS CONTROL SETUP] setting has been
completed.
fIf the shutter function is enabled (shutter: closed) within approximately 10 minutes after the light source has turned on while [CONSTANT
MODE] in [BRIGHTNESS CONTROL SETUP] is set to [AUTO] or [PC], brightness and color cannot be measured. Therefore, brightness
may be corrected approximately two minutes after the shutter function is disabled (shutter: open).
fSince the brightness and the color of the light source do not stabilize for approximately eight minutes after turning on the light source when
[CONSTANT MODE] in [BRIGHTNESS CONTROL SETUP] is set to [AUTO] or [PC], the brightness and the color of the light source will
automatically measured approximately eight minutes after the light source is turned on. A correction is made based on this measurement
result so that the brightness and the color will be the same as the standard brightness and the color when adjusted with the brightness
control.
fWhen the projector operates with [CONSTANT MODE] in [BRIGHTNESS CONTROL SETUP] set to [AUTO] or [PC], the items of
[OPERATING MODE] and [LIGHT OUTPUT] cannot be changed.
fWhen [CONSTANT MODE] in [BRIGHTNESS CONTROL SETUP] is set to [AUTO], and [LINK] is set to [OFF], the brightness will be
corrected until it reaches the value set in [MAX LIGHT OUTPUT LEVEL].
fThe variation in brightness may increase due to dust accumulating on the lens, screen, or inside the projector, depending on the installation
environment of the projector.
fWhen the variation in brightness has increased due to aging of the light source, or when you replaced the light source, readjust the
brightness control.
fWhen the projector is used continuously for more than 24 hours, set the [CALIBRATION TIME] in [BRIGHTNESS CONTROL SETUP]. If it is
not set, correction will not be performed automatically.
fThe brightness control function and the dynamic contrast function will operate simultaneously, but the dynamic contrast function will not
operate while measuring the brightness and the color.
fThe [CALIBRATION TIME] setting will be reected when you enter the time.
fThe [CALIBRATION MESSAGE] setting will be reected when the item is changed using qw.
[LIGHT OUTPUT]
Adjust the brightness of light source.
The setting is reected when it is already set with “Initial setting (operation setting)” (x page 58) in the [INITIAL
SETTING] screen, or the [PROJECTOR SETUP] menu → [OPERATION SETTING]. The [LIGHT OUTPUT]
setting is synchronized with the [PROJECTOR SETUP] menu → [OPERATION SETTING] → [LIGHT OUTPUT].
The most recent setting is reected in both items.
1) Press as to select [LIGHT OUTPUT].
2) Press qw to adjust.
Operation
Adjustment
Range of adjustment
BrightnessRuntime (estimate)
Press w.
The screen becomes brighter.The runtime becomes shorter.
8.0 % - 100.0 %
Press q.
The screen becomes darker.The runtime becomes longer.
Note
f[LIGHT OUTPUT] can be adjusted individually for each setting item of [OPERATING MODE].
fIn such a case when conguring multiple screens with multiple projectors, uniformity of brightness between multiple screens can be
obtained by adjusting [LIGHT OUTPUT].
Manual
View the manual for the Panasonic PT-RZ12K here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 7.6. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-RZ12K or do you need help? Ask your question here
Do you have a question about the Panasonic and is the answer not in the manual?
Receive updates on solutions
Get answers to your question
Question and answer
Number of questions: 1
H
Hernán April 4, 2022
What is the sep chip used to connect the lamp and what is its name and where to buy?
View photoThis message has been automatically translated
Panasonic PT-RZ12K specifications
Below you will find the product specifications and the manual specifications of the Panasonic PT-RZ12K.
The Panasonic PT-RZ12K is a video projector designed to deliver high brightness and exceptional image quality. With a brightness of 12000 ANSI lumens, this projector is suitable for large venues such as auditoriums, conference halls, and theaters, ensuring clear and vivid visuals even in well-lit environments.
Featuring a native resolution of WUXGA (1920x1200), the PT-RZ12K delivers sharp and detailed images, making it ideal for presentations, movies, and gaming. The projector's 16:10 native aspect ratio and supported aspect ratios ensure compatibility with a wide range of content formats for versatile usage.
Equipped with a contrast ratio of 20000:1, the PT-RZ12K produces deep blacks and vibrant colors, enhancing image depth and overall visual quality. Its dot clock scanning frequency of 162 MHz ensures smooth and flicker-free image reproduction.
The projector comes with an air filter that helps maintain the optimal cooling performance, ensuring reliable and efficient operation. Additionally, its heat dissipation rate of 4096 BTU/h ensures effective cooling and prevents overheating, even during prolonged use.
The PT-RZ12K offers high uniformity of 90%, ensuring consistent brightness distribution across the projection area. This feature is essential for achieving a well-balanced and immersive viewing experience.
The projector includes a resource CD for easy installation and setup, providing users with the necessary software and documentation. With its premium build quality and attention to detail, the PT-RZ12K guarantees long-lasting performance and durability.
In summary, the Panasonic PT-RZ12K video projector combines impressive brightness, excellent image resolution, and convenient features to deliver exceptional visual experiences in various professional settings.
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 1What is the sep chip used to connect the lamp and what is its name and where to buy?