fBackup function is enabled when [BACKUP INPUT MODE] is set to [1], and the same signal is input to the <DVI-D IN> and <HDMI IN>
terminals.
Alternatively, the backup function is enabled when [BACKUP INPUT MODE] is set to [2], and same signal is input to the <SDI IN 1> terminal
and the <SDI IN 2>.
fTo switch to the backup input signal using the backup function, make sure that the following three conditions are satised to be ready to use
the function.
gSet [BACKUP INPUT MODE] to anything other than [OFF].
gInput the same signal to the primary and secondary inputs.
gDisplay the image of the primary input.
fIf the input is switched to other than the primary or secondary input while the backup function is ready for use, the state of readiness to use
the backup function is canceled. To switch to the backup input signal using the backup function again, switch to the primary input.
f[BACKUP INPUT STATUS] is displayed in the input guide (x page 119) and [STATUS] screen (x pages 74, 146) when [BACKUP
INPUT MODE] is set to anything other than [OFF].
When switching to the backup input signal is possible using the backup function, [ACTIVE] is displayed in [BACKUP INPUT STATUS]. When
it is not possible, [INACTIVE] is displayed instead.
When [BACKUP INPUT STATUS] is [ACTIVE] while the image of the primary input is displayed, the secondary input becomes the backup
input.
When [BACKUP INPUT STATUS] is [ACTIVE] while the image of the secondary input is displayed, the primary input becomes the backup
input.
fThe input is switched seamlessly when the inputs of the DVI-D and the HDMI are switched while [BACKUP INPUT MODE] is set to [1] and
switching to the backup input signal is possible.
fIf [BACKUP INPUT MODE] is set to [2], the input is switched seamlessly when the inputs of SDI1 and SDI2 are switched while switching to
the backup input signal is possible.
fWhen [AUTOMATIC SWITCHING] is set to [ENABLE], and [BACKUP INPUT STATUS] is [ACTIVE], the signal is switched to the backup
input if the input signal is disrupted.
fWhen [AUTOMATIC SWITCHING] is set to [ENABLE] and the signal is automatically switched to the backup input due to disruption of the
input signal, [BACKUP INPUT STATUS] changes to [INACTIVE]. In this case, switching to the backup input signal is not possible until the
original input signal is restored. If the signal is automatically switched to the backup input, switching to the backup input signal becomes
possible when the original input signal is restored. In this case, the current input is retained.
f[BACKUP INPUT SETTING] cannot be set during P IN P. The backup operation is not performed either.
f[BACKUP INPUT SETTING] cannot be set when the [DISPLAY OPTION] menu → [SIMUL INPUT SETTING] → [HDMI/DVI-D] or [SDI1/
SDI2] is set to anything other than [OFF]. The backup operation is not performed either.
f[BACKUP INPUT SETTING] cannot be set when the [DISPLAY OPTION] menu → [SDI IN] → [SDI LINK] is set to [DUAL LINK] or [AUTO].
The backup operation is not performed either.
[SIMUL INPUT SETTING]
Set this function when the video signal in simultaneous format is input and used.
1) Press as to select [SIMUL INPUT SETTING].
2) Press the <ENTER> button.
fThe [SIMUL INPUT SETTING] screen is displayed.
3) Press as button to select [RGB1/RGB2], [HDMI/DVI-D], or [SDI1/SDI2].
4) Press qw to switch the setting.
f The items will switch each time you press the button.
[OFF]This is not used for simultaneous input.
[AUTO(3D)]Displays 3D images of the simultaneous format.
[AUTO(2D)]
*1
Displays 2D image of the simultaneous format.
*1 This can be set only when [SIMUL INPUT SETTING] is set to [HDMI/DVI-D] or [SDI1/SDI2].
Note
fIf [AUTO(2D)] is set, 2D images are displayed when the same 2D compatible signals are entered to each input.
fIf [AUTO(3D)] is set, 3D images are displayed when the same 3D compatible signals are entered to each input.
f[SIMUL INPUT SETTING] cannot be set during P IN P.
f[SIMUL INPUT SETTING] cannot be set when [BACKUP INPUT MODE] is set to anything other than [OFF].
fThis may not function properly for some connected external devices.
fThis may not function properly depending on the signal.
fUsage of each input signal is displayed in [RGB1] and [RGB2], in [HDMI] and [DVI-D], and in [SDI1] and [SDI2] of the [SIMUL INPUT
SETTING] screen when [AUTO(3D)] or [AUTO(2D)] is set.
[SIMUL INPUT SETTING]Usage of the input signalDetails
[AUTO(3D)]
[LEFT INPUT]
Uses the signal for the corresponding input as a signal for the left
eye image.
[RIGHT INPUT]
Uses the signal for the corresponding input as a signal for the right
eye image.
Manual
View the manual for the Panasonic PT-RZ12K here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 7.6. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-RZ12K or do you need help? Ask your question here
Do you have a question about the Panasonic and is the answer not in the manual?
Receive updates on solutions
Get answers to your question
Question and answer
Number of questions: 1
H
Hernán April 4, 2022
What is the sep chip used to connect the lamp and what is its name and where to buy?
View photoThis message has been automatically translated
Panasonic PT-RZ12K specifications
Below you will find the product specifications and the manual specifications of the Panasonic PT-RZ12K.
The Panasonic PT-RZ12K is a video projector designed to deliver high brightness and exceptional image quality. With a brightness of 12000 ANSI lumens, this projector is suitable for large venues such as auditoriums, conference halls, and theaters, ensuring clear and vivid visuals even in well-lit environments.
Featuring a native resolution of WUXGA (1920x1200), the PT-RZ12K delivers sharp and detailed images, making it ideal for presentations, movies, and gaming. The projector's 16:10 native aspect ratio and supported aspect ratios ensure compatibility with a wide range of content formats for versatile usage.
Equipped with a contrast ratio of 20000:1, the PT-RZ12K produces deep blacks and vibrant colors, enhancing image depth and overall visual quality. Its dot clock scanning frequency of 162 MHz ensures smooth and flicker-free image reproduction.
The projector comes with an air filter that helps maintain the optimal cooling performance, ensuring reliable and efficient operation. Additionally, its heat dissipation rate of 4096 BTU/h ensures effective cooling and prevents overheating, even during prolonged use.
The PT-RZ12K offers high uniformity of 90%, ensuring consistent brightness distribution across the projection area. This feature is essential for achieving a well-balanced and immersive viewing experience.
The projector includes a resource CD for easy installation and setup, providing users with the necessary software and documentation. With its premium build quality and attention to detail, the PT-RZ12K guarantees long-lasting performance and durability.
In summary, the Panasonic PT-RZ12K video projector combines impressive brightness, excellent image resolution, and convenient features to deliver exceptional visual experiences in various professional settings.
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 1What is the sep chip used to connect the lamp and what is its name and where to buy?