Chapter 3Basic Operations — Operating with the remote control
72 - ENGLISH
Operating with the remote control
Using the shutter function
If the projector is not used for a certain period of time during the meeting intermission, for example, it is possible
to turn off the image and audio temporarily.
button
1) Press the <SHUTTER> button.
fThe image and audio disappear.
fThis operation can be also performed by pressing the <SHUTTER> button on the control panel.
2) Press the <SHUTTER> button again.
fThe image and audio reappear.
Note
fThe power indicator <ON (G)/STANDBY (R)> will blink slowly in green while the shutter function is in use (shutter: closed).
fThe fade-in/fade-out time of the image can be set in the [DISPLAY OPTION] menu →[SHUTTER SETTING] (x page 110).
fTo output audio while the shutter function is in use (shutter: closed), set the [PROJECTOR SETUP] menu →[AUDIO SETTING]
(x page 123)→ [IN SHUTTER] to [ON].
fThe light source may be lit dimly due to warm up when the shutter function is used in the operating environment temperature of around 0 °C
(32 °F).
Using the mute function
Audio can be temporarily turned off.
button
1) Press the <MUTE> button.
fThe audio is muted.
2) Press the <MUTE> button again.
fThe audio is turned on.
Manual
View the manual for the Panasonic PT-MZ770EJ here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-MZ770EJ or do you need help? Ask your question here
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0