<HDMI 1 IN> terminal/<HDMI 2 IN> terminal pin assignments and signal names
Outside viewPin No.Signal namePin No.Signal name
Even-numbered pins of (2) to (18)
(1)(19)
(2)(18)
Odd-numbered pins of (1) to (19)
(1)
T.M.D.S data 2+
(11)
T.M.D.S clock shield
(2)
T.M.D.S data 2 shield
(12)
T.M.D.S clock
-
(3)
T.M.D.S data 2
-
(13)
CEC
(4)
T.M.D.S data 1+
(14)
―
(5)
T.M.D.S data 1 shield
(15)
SCL
(6)
T.M.D.S data 1
-
(16)
SDA
(7)
T.M.D.S data 0+
(17)
DDC/CEC
GND
(8)
T.M.D.S data 0 shield
(18)
+5 V
(9)
T.M.D.S data 0
-
(19)
Hot plug detection
(10)
T.M.D.S clock+
Connecting example: AV equipment
Audio device
VCR
(with built-in TBC)
Blu-ray disc player
Attention
fBe sure to use one of the following when connecting a VCR.
gUse a VCR with built-in time base corrector (TBC).
gUse a time base corrector (TBC) between the projector and the VCR.
fThe image may be disrupted when nonstandard burst signal is connected. In such a case, connect the time base corrector (TBC) between
the projector and the external devices.
Note
fFor the HDMI cable, use an HDMI High Speed cable that conforms to the HDMI standards. If a cable that does not conform to the HDMI
standards is used, images may be interrupted or may not be projected.
fThe <HDMI 1 IN>/<HDMI 2 IN> terminals can be connected to an external device with the DVI-D terminal by using an HDMI/DVI conversion
cable. However, this may not function properly for some external devices, and image may not be projected.
fThe projector does not support VIERA Link (HDMI).
Manual
View the manual for the Panasonic PT-MZ770EJ here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-MZ770EJ or do you need help? Ask your question here
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0