When the following two conditions are met, the guide for wring the pairing data is displayed in the standby screen
when the USB memory is connected to the <VIEWER/PAIRING> terminal.
fThe [NETWORK/USB] menu → [Panasonic APPLICATION] → [PAIRING GUIDE] is set to [ON]
fInput is Panasonic APPLICATION
By wring the pairing data to the USB memory following the instruction, the pairing of the projector and that USB
memory is completed.
Connection to the projector is automatically performed by attaching the USB memory paired with the projector to
the USB terminal of the Windows computer or Mac, and starting the image transfer application software “Plug and
Share” in the USB memory.
The pairing data is a connection information between the image transfer application software “Plug and Share”,
and the projector and the USB memory.
Attention
fDo not use a USB extension cable or a USB hub, and directly insert the USB memory into the <VIEWER/PAIRING> terminal of the
projector.
fDo not insert the USB memory into the <DC OUT> terminal. The USB memory cannot be used on the <DC OUT> terminal.
Note
fIf the USB memory cannot be directly connected to the <VIEWER/PAIRING> terminal of the projector, such as the projector is installed
on the ceiling, it is possible to download the image transfer application software “Plug and Share” to a USB memory from the Panasonic
website, and use it. Refer to the following URL.
https://panasonic.net/cns/projector/
Pairing the USB memory
1) Set the [NETWORK/USB] menu → [Panasonic APPLICATION] → [PAIRING GUIDE] to [ON].
2) Press the <NETWORK/USB> button to switch the input to Panasonic APPLICATION.
fEvery time the <NETWORK/USB> button is pressed, the input will switch in the order of MEMORY
VIEWER, Panasonic APPLICATION, and MIRRORING. Press the <NETWORK/USB> button until the input
switches to Panasonic APPLICATION.
fThe standby screen is displayed once the input is switched to Panasonic APPLICATION.
3) Connect the USB memory for pairing to the <VIEWER/PAIRING> terminal.
fFor the USB memory that can be used for pairing, refer to “USB memory that can be used with the
projector” (x page 70).
fFor the handling of the USB memory, refer to “Using the USB memory” (x page 70).
4) When the confirmation message is displayed on the standby screen, press qw to select [OK], and
press the <ENTER> button.
fThe pairing data is written to the USB memory.
Manual
View the manual for the Panasonic PT-MZ770EJ here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-MZ770EJ or do you need help? Ask your question here
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0