Panasonic PT-MZ770EJ manual

Panasonic PT-MZ770EJ
8.9 · 1
PDF manual
 · 233 pages
English
manualPanasonic PT-MZ770EJ
Chapter 5Operations — Projecting with MEMORY VIEWER input

194 - ENGLISH

Playing back using the contents list

When the [NETWORK/USB] menu [MEMORY VIEWER] [AUTOPLAY] is set to [SCENARIO], playback of
still image or movie and transmission of the Light ID signal are performed automatically following the setting of the
contents list saved in the USB memory. To transmit the Light ID signal, it is necessary to set the [PROJECTOR
SETUP] menu [LightID] to [EXTERNAL CONTROL].
The contents list is generated with the “Multi Monitoring & Control Software”, and it can be saved in the USB
memory, etc. For details, refer to the Operating Instructions of “Multi Monitoring & Control Software”.
1) Insert the USB memory with the contents list saved into the <VIEWER/PAIRING> terminal.
f For the handling of the USB memory, refer to “Using the USB memory” (x page 70).
2) Press the <NETWORK/USB> button to switch the input to MEMORY VIEWER.
f Every time the <NETWORK/USB> button is pressed, the input will switch in the order of MEMORY
VIEWER, Panasonic APPLICATION, and MIRRORING. Press the <NETWORK/USB> button until the input
switches to MEMORY VIEWER.
f Once the input is switched to MEMORY VIEWER, playback is repeated automatically following the setting
of the contents list.
3) Press the <NETWORK/USB> button to switch the input to anything other than MEMORY VIEWER to
end.
f Once the input is switched to anything other than MEMORY VIEWER, playback using the contents list
ends.
Note
f The contents list is the following 4 types of le. Generate it in advance using the “Multi Monitoring & Control Software”.
g Scenario le specifying the playback order and time (scenario.dat)
g File list summarizing the playback le names (lelist.dat)
g Light ID denition le to specify the Light ID (lightid.dat)
g Contents le to project movies and still images (jpg, mp4 etc.)
f Nothing is played back, when the [NETWORK/USB] menu [MEMORY VIEWER] [AUTOPLAY] is set to [SCENARIO] and there is no
contents list in the USB memory, or there is defect in it.
f Playback can also be stopped by setting the [NETWORK/USB] menu [MEMORY VIEWER] [AUTOPLAY] to anything other than
[SCENARIO].
f Playback is suspended and the contents list is updated when the contents list is distributed using the “Multi Monitoring & Control Software”
during playback using the contents list. Once the update of contents list is completed, playback using the overwritten contents list resumes.

Manual

View the manual for the Panasonic PT-MZ770EJ here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-MZ770EJ or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Panasonic and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Panasonic PT-MZ770EJ specifications

Below you will find the product specifications and the manual specifications of the Panasonic PT-MZ770EJ.

General
BrandPanasonic
ModelPT-MZ770EJ | PT-MZ770EJ
Productvideo projector
LanguageEnglish
FiletypeUser manual (PDF)
Projector
Projector native resolutionWUXGA (1920x1200)
Projector brightness8000 ANSI lumens
Projection technologyLCD
Contrast ratio (typical)-
Native aspect ratio16:10
Screen size compatibility40 - 400 "
Projection distance1.02 - 10.16 m
Contrast ratio (dynamic)3000000:1
Keystone correction, horizontal-35 - 35 °
Keystone correction, vertical-35 - 35 °
Multimedia
Built-in speaker(s)Yes
RMS rated power10 W
Light source
Service life of light source- h
Design
Product typeLarge venue projector
Product colorWhite
Housing materialABS, Plastic
Market positioning-
PlacementDesktop
Lens system
Focal length range26.8 - 45.5 mm
Aperture range (F-F)1.7 - 2.3
Throw ratio1.6 - 2.8:1
Display
Built-in display-
Power
Power sourceAC
Power consumption (standby)- W
AC input frequency50 - 60 Hz
AC input voltage100 - 240 V
Video
Analog signal format system-
Full HDYes
3DNo
Ports & interfaces
VGA (D-Sub) ports quantity4
HDMI ports quantity2
Composite video in0
Component video (YPbPr/YCbCr) in0
DVI portNo
USB 2.0 ports quantity1
Audio (L/R) in2
Audio (L/R) out1
S-Video inputs quantity-
BNC input ports5
DC-in jackYes
Network
Ethernet LAN (RJ-45) ports2
Smart TVNo
Ethernet LANYes
Wi-FiNo
Operational conditions
Operating temperature (T-T)0 - 45 °C
Operating relative humidity (H-H)20 - 80 %
Other features
RS-232 ports-
Weight & dimensions
Weight17100 g
Width560 mm
Depth443 mm
Height205 mm
Packaging content
Handheld remote control-
Storage
Card reader integrated-
Features
Noise level35 dB
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Panasonic PT-MZ770EJ below.

What is the weight of the Panasonic PT-MZ770EJ?

The Panasonic PT-MZ770EJ has a weight of 17100 g.

What is the height of the Panasonic PT-MZ770EJ?

The Panasonic PT-MZ770EJ has a height of 205 mm.

What is the width of the Panasonic PT-MZ770EJ?

The Panasonic PT-MZ770EJ has a width of 560 mm.

What is the depth of the Panasonic PT-MZ770EJ?

The Panasonic PT-MZ770EJ has a depth of 443 mm.

Is the manual of the Panasonic PT-MZ770EJ available in English?

Yes, the manual of the Panasonic PT-MZ770EJ is available in English .

Is your question not listed? Ask your question here

No results