Panasonic PT-MZ770EJ manual

Panasonic PT-MZ770EJ
8.9 · 1
PDF manual
 · 233 pages
English
manualPanasonic PT-MZ770EJ
Chapter 5Operations — Projecting with MIRRORING input

184 - ENGLISH

Operating with the web browser

When using the projector in the moderator mode, the device to be allow connection can be specied with the web
browser in addition to operation in the standby screen.
1) Set the [NETWORK/USB] menu [MIRRORING] [MODERATOR MODE] to [ON].
2) Press the <NETWORK/USB> button to switch the input to MIRRORING.
f Every time the <NETWORK/USB> button is pressed, the input will switch in the order of MEMORY
VIEWER, Panasonic APPLICATION, and MIRRORING. Press the <NETWORK/USB> button until the input
switches to MIRRORING.
f The standby screen is displayed once the input is switched to MIRRORING.
3) Search the display that can be connected to the Miracast compatible device, and select this projector.
f Conrm the receiving device name displayed in the standby screen, and select the device name
corresponding to this projector from the search result displayed in the device screen.
f When the [NETWORK/USB] menu [MIRRORING] [CONNECTION TYPE] is set to [PIN], entry of PIN
may be requested at the time of connection. In such case, enter the eight-digit PIN code displayed at the
top of the standby screen.
4) Press the <AUTO SETUP/CANCEL> button.
f The receiving device name and the URL to access the projector is displayed at the top left of the screen.
5) Start the web browser in the moderator device.
f Perform the operation in Step 3) in advance on the moderator device.
f For the browser that can be used, refer to “Computer that can be used for setting” (x page 159).
6) Enter the address displayed in Step 4) into the URL entry field of the web browser.
7) Enter the user name and password with moderator rights.
f The factory default setting of the user name is moderator, and the password is @Panasonic.
8) Click OK.
f The [MODERATOR MODE] page is displayed.
9) Click the device to allow connection.
f Select the device to display the screen with the projector from the names of devices displayed in the
[MODERATOR MODE] page.
f After a while, the screen of the selected device is displayed as a projected image.
Note
f Click another device in the [MODERATOR MODE] page while projecting the screen of the device and switch the display to the screen of that
device. Clicking the device being projected will end the projection of the device, and display the standby screen.
f The [MODERATOR MODE] page can be operated with the user name and password with the administrator rights for the web control screen.

Manual

View the manual for the Panasonic PT-MZ770EJ here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-MZ770EJ or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Panasonic and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Panasonic PT-MZ770EJ specifications

Below you will find the product specifications and the manual specifications of the Panasonic PT-MZ770EJ.

General
BrandPanasonic
ModelPT-MZ770EJ | PT-MZ770EJ
Productvideo projector
LanguageEnglish
FiletypeUser manual (PDF)
Projector
Projector native resolutionWUXGA (1920x1200)
Projector brightness8000 ANSI lumens
Projection technologyLCD
Contrast ratio (typical)-
Native aspect ratio16:10
Screen size compatibility40 - 400 "
Projection distance1.02 - 10.16 m
Contrast ratio (dynamic)3000000:1
Keystone correction, horizontal-35 - 35 °
Keystone correction, vertical-35 - 35 °
Multimedia
Built-in speaker(s)Yes
RMS rated power10 W
Light source
Service life of light source- h
Design
Product typeLarge venue projector
Product colorWhite
Housing materialABS, Plastic
Market positioning-
PlacementDesktop
Lens system
Focal length range26.8 - 45.5 mm
Aperture range (F-F)1.7 - 2.3
Throw ratio1.6 - 2.8:1
Display
Built-in display-
Power
Power sourceAC
Power consumption (standby)- W
AC input frequency50 - 60 Hz
AC input voltage100 - 240 V
Video
Analog signal format system-
Full HDYes
3DNo
Ports & interfaces
VGA (D-Sub) ports quantity4
HDMI ports quantity2
Composite video in0
Component video (YPbPr/YCbCr) in0
DVI portNo
USB 2.0 ports quantity1
Audio (L/R) in2
Audio (L/R) out1
S-Video inputs quantity-
BNC input ports5
DC-in jackYes
Network
Ethernet LAN (RJ-45) ports2
Smart TVNo
Ethernet LANYes
Wi-FiNo
Operational conditions
Operating temperature (T-T)0 - 45 °C
Operating relative humidity (H-H)20 - 80 %
Other features
RS-232 ports-
Weight & dimensions
Weight17100 g
Width560 mm
Depth443 mm
Height205 mm
Packaging content
Handheld remote control-
Storage
Card reader integrated-
Features
Noise level35 dB
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Panasonic PT-MZ770EJ below.

What is the weight of the Panasonic PT-MZ770EJ?

The Panasonic PT-MZ770EJ has a weight of 17100 g.

What is the height of the Panasonic PT-MZ770EJ?

The Panasonic PT-MZ770EJ has a height of 205 mm.

What is the width of the Panasonic PT-MZ770EJ?

The Panasonic PT-MZ770EJ has a width of 560 mm.

What is the depth of the Panasonic PT-MZ770EJ?

The Panasonic PT-MZ770EJ has a depth of 443 mm.

Is the manual of the Panasonic PT-MZ770EJ available in English?

Yes, the manual of the Panasonic PT-MZ770EJ is available in English .

Is your question not listed? Ask your question here

No results