Chapter 5Operations — Projecting with MIRRORING input
ENGLISH - 183
fPress the <AUTO SETUP/CANCEL> button while displaying the device screen to display the receiving device name at the top left of the
screen.
Ending the connection with the device
1) Perform disconnection process in the device side.
fOnce the connection is disconnected, the standby screen is displayed.
Note
fIt may take some time for the standby screen to display when the connection is ended forcefully by turning off the device, etc., without
performing an appropriate disconnection process.
Using the moderator mode in the MIRRORING input
When using the projector in the moderator mode, the moderator can specify the device allowed to display by
operating the projector when multiple devices are connected to the projector for mirroring.
1) Set the [NETWORK/USB] menu → [MIRRORING] → [MODERATOR MODE] to [ON].
2) Press the <NETWORK/USB> button to switch the input to MIRRORING.
fEvery time the <NETWORK/USB> button is pressed, the input will switch in the order of MEMORY
VIEWER, Panasonic APPLICATION, and MIRRORING. Press the <NETWORK/USB> button until the input
switches to MIRRORING.
fThe standby screen is displayed once the input is switched to MIRRORING.
3) Search the display that can be connected on the Miracast compatible device, and select this
projector.
fConrm the receiving device name displayed in the standby screen, and select the device name
corresponding to this projector from the search result displayed in the device screen.
fWhen the [NETWORK/USB] menu → [MIRRORING] → [CONNECTION TYPE] is set to [PIN], entry of PIN
may be requested at the time of connection. In such case, enter the eight-digit PIN code displayed at the
top of the standby screen.
4) Press as to select the device to allow connection, and press the <ENTER> button.
fSelect the device to display its screen from the device names displayed in the standby screen.
fAfter a while, the screen of the selected device is displayed as a projected image.
Note
fThe operation method may differ depending on the device or the application software in use.
fFor details on moderator mode setting, refer to the [NETWORK/USB] menu →[MIRRORING] (x page 150).
fThe device name displayed in the standby screen differs depending on the device and the application software that is used. In case of the
Miracast compatible Windows computer, the computer name is displayed.
fPress either as or the <ENTER> button while displaying the screen of the device to display the standby screen.
fSelection of the device to display can also be performed on the web browser. For details, refer to “Operating with the web browser”
(x page 184).
fPress the <AUTO SETUP/CANCEL> button while displaying the device screen to display the receiving device name at the top left of the
screen.
Manual
View the manual for the Panasonic PT-MZ770EJ here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-MZ770EJ or do you need help? Ask your question here
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0