Panasonic PT-MZ770EJ manual

Panasonic PT-MZ770EJ
8.9 · 1
PDF manual
 · 233 pages
English
manualPanasonic PT-MZ770EJ
Chapter 5Operations — Projecting with Panasonic APPLICATION input

ENGLISH - 179

Projecting with Panasonic APPLICATION input

Using the Panasonic application, the image sent from a device connected via LAN can be displayed as a
projected image.

Application that can be used

The image transfer application software used for Panasonic APPLICATION input are as follows.
f Wireless Manager ME6.4
f Plug and Share
f Wireless Projector for iOS, Wireless Projector for Android
Note
f For details of the installation method of the application software, connection method to the projector, and operation method, refer to the
Panasonic website (https://panasonic.net/cns/projector/).
f “Plug and Share” allows to write the connection information between the image transfer application software “Plug and Share”, and the
projector and the USB memory by attaching the USB memory to the <VIEWER/PAIRING> terminal of the projector. By connecting this
paired USB memory to the USB terminal of the Windows computer or Mac, “Plug and Share” will automatically start up and perform the
connection operation to the projector. For details on the pairing method, refer to “Using the pairing function” (x page 195).

Connecting the device

1) Press the <NETWORK/USB> button to switch the input to Panasonic APPLICATION.
f Every time the <NETWORK/USB> button is pressed, the input will switch in the order of MEMORY
VIEWER, Panasonic APPLICATION, and MIRRORING. Press the <NETWORK/USB> button until the input
switches to Panasonic APPLICATION.
f The standby screen is displayed once the input is switched to Panasonic APPLICATION.
f The standby screen differs depending on the setting in the [NETWORK/USB] menu [WIRELESS LAN].
For details on the standby screen, refer to “Description of the standby screen” (x page 180).
2) Connect the device with the image transfer application software started to the projector.
f The image sent to the projector by the operation on the device is displayed as the projected image.
Note
f For details of the connection method to the projector using the application software, refer to the Operation Instruction of each application
software.
f When the <AUTO SETUP/CANCEL> button on the remote control or the <LENS/CANCEL> button on the control panel is pressed while
displaying the image from the device, the information such as the network ID, the projector name, or the QR code is displayed on the
screen. For details of these information, refer to “Description of the standby screen” (x page 180).

Ending the connection with the device

1) Perform disconnection process in the device side.
f Once the connection is disconnected, the standby screen is displayed.
Note
f It may take some time for the standby screen to display when the connection is ended forcefully by turning off the device, etc., without
performing an appropriate disconnection process.

Manual

View the manual for the Panasonic PT-MZ770EJ here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-MZ770EJ or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Panasonic and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Panasonic PT-MZ770EJ specifications

Below you will find the product specifications and the manual specifications of the Panasonic PT-MZ770EJ.

General
BrandPanasonic
ModelPT-MZ770EJ | PT-MZ770EJ
Productvideo projector
LanguageEnglish
FiletypeUser manual (PDF)
Projector
Projector native resolutionWUXGA (1920x1200)
Projector brightness8000 ANSI lumens
Projection technologyLCD
Contrast ratio (typical)-
Native aspect ratio16:10
Screen size compatibility40 - 400 "
Projection distance1.02 - 10.16 m
Contrast ratio (dynamic)3000000:1
Keystone correction, horizontal-35 - 35 °
Keystone correction, vertical-35 - 35 °
Multimedia
Built-in speaker(s)Yes
RMS rated power10 W
Light source
Service life of light source- h
Design
Product typeLarge venue projector
Product colorWhite
Housing materialABS, Plastic
Market positioning-
PlacementDesktop
Lens system
Focal length range26.8 - 45.5 mm
Aperture range (F-F)1.7 - 2.3
Throw ratio1.6 - 2.8:1
Display
Built-in display-
Power
Power sourceAC
Power consumption (standby)- W
AC input frequency50 - 60 Hz
AC input voltage100 - 240 V
Video
Analog signal format system-
Full HDYes
3DNo
Ports & interfaces
VGA (D-Sub) ports quantity4
HDMI ports quantity2
Composite video in0
Component video (YPbPr/YCbCr) in0
DVI portNo
USB 2.0 ports quantity1
Audio (L/R) in2
Audio (L/R) out1
S-Video inputs quantity-
BNC input ports5
DC-in jackYes
Network
Ethernet LAN (RJ-45) ports2
Smart TVNo
Ethernet LANYes
Wi-FiNo
Operational conditions
Operating temperature (T-T)0 - 45 °C
Operating relative humidity (H-H)20 - 80 %
Other features
RS-232 ports-
Weight & dimensions
Weight17100 g
Width560 mm
Depth443 mm
Height205 mm
Packaging content
Handheld remote control-
Storage
Card reader integrated-
Features
Noise level35 dB
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Panasonic PT-MZ770EJ below.

What is the weight of the Panasonic PT-MZ770EJ?

The Panasonic PT-MZ770EJ has a weight of 17100 g.

What is the height of the Panasonic PT-MZ770EJ?

The Panasonic PT-MZ770EJ has a height of 205 mm.

What is the width of the Panasonic PT-MZ770EJ?

The Panasonic PT-MZ770EJ has a width of 560 mm.

What is the depth of the Panasonic PT-MZ770EJ?

The Panasonic PT-MZ770EJ has a depth of 443 mm.

Is the manual of the Panasonic PT-MZ770EJ available in English?

Yes, the manual of the Panasonic PT-MZ770EJ is available in English .

Is your question not listed? Ask your question here

No results