Enter the user name to be used for authentication in single-byte alphanumeric characters (excluding
the space). (Maximum of 64 characters)
This can be set when [EAP] is set to anything other than [NONE].
[PASSWORD]
Enter the password to be used for authentication in single-byte alphanumeric characters. (Maximum
of 64 characters)
This can be set when [EAP] is set to anything other than [NONE].
4) Once the setting change is completed, press as to select [STORE], and press the <ENTER> button.
f The conrmation screen is displayed.
fWhen [INVALID ENTRY. PLEASE RE-ENTER.] is displayed, change the setting to correct content.
5) Press qw to select [OK], and press the <ENTER> button.
Note
fFor setting content of each item, consult the network administrator.
fWhen using EAP, the projector is required to be set according to the RADIUS server setting. For the RADIUS server setting, conrm with the
network administrator.
fWired LAN and wireless LAN cannot be used in the same segment.
fWhen using the projector by setting [DHCP] to [ON], conrm that the DHCP server is operating.
r Factory default setting
f Following is preset as the factory default setting.
Manual
View the manual for the Panasonic PT-MZ770EJ here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-MZ770EJ or do you need help? Ask your question here
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0