fWhen [INPUT SELECT BUTTON] is selected in Step 7), pressing the <MENU> button returns to the
[CONTROL PANEL] screen or the [REMOTE CONTROL] screen once the item is switched.
9) Press as to select [APPLY], and press the <ENTER> button.
f The conrmation screen is displayed.
10) Press qw to select [OK], and press the <ENTER> button.
Note
fWhen a button operation is performed on the the control panel or remote control where [DISABLE] is set, the [CONTROL DEVICE
PASSWORD] screen is displayed.
Enter the control device password.
fThe [CONTROL DEVICE PASSWORD] screen will disappear when there is no operation for approx. 10 seconds.
fWhen the setting has completed, the menu screen will disappear. To operate continuously, press the <MENU> button to display the main
menu.
fEven when you set button operations on the remote control disabled, operations of the <ID SET> and <ID ALL> buttons on the remote
control are kept enabled.
[CONTROL DEVICE PASSWORD CHANGE]
The control device password can be changed.
1) Press as to select [CONTROL DEVICE PASSWORD CHANGE].
2) Press the <ENTER> button.
fThe [CONTROL DEVICE PASSWORD CHANGE] screen is displayed.
3) Press asqw to select the text, and press the <ENTER> button to enter the text.
4) Press asqw to select [OK], and press the <ENTER> button.
f To cancel, select [CANCEL].
Attention
fThe initial password is “AAAA” as the factory default or when the [PROJECTOR SETUP] menu → [INITIALIZE] → [ALL USER DATA] is
executed.
fChange the password periodically that is hard to guess.
Manual
View the manual for the Panasonic PT-MZ770EJ here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-MZ770EJ or do you need help? Ask your question here
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0