Panasonic PT-MZ770EJ manual

Panasonic PT-MZ770EJ
8.9 · 1
PDF manual
 · 233 pages
English
manualPanasonic PT-MZ770EJ

Chapter 4Settings — [PROJECTOR SETUP] menu

ENGLISH - 117

1) Press as to select [LightID].

2) Press qw to switch the item.

f The items will switch each time you press the button.

[OFF]
Disables the Light ID function. The Light ID signal is not transmitted.
[EXTERNAL CONTROL]
Transmits the Light ID signal set by the user.
Select this item when the Light ID signal transmitted by the projector is switched using the contents
list distribution function or the Light ID control function of the “Multi Monitoring & Control Software”.
To set the Light ID, it is necessary to purchase the Light ID. To purchase the Light ID, visit the
Panasonic website (https://panasonic.net/cns/LinkRay/).
The Light ID which the user has set is erased in following cases.
f When the <MAIN POWER> switched is set to <OFF>
[INTERNAL ID]
Transmits the internal Light ID signal.
The Light ID signal is linked to the Panasonic website (https://panasonic.net/cns/projector/) in the
factory default setting or after the [PROJECTOR SETUP] menu [INITIALIZE] is executed.
When the Light ID is set while [LightID] is set to [INTERNAL ID], the Light ID signal set by the user is
transmitted.
Note
f When the [PROJECTOR SETUP] menu [ECO MANAGEMENT] [LIGHT POWER] is set to anything other than [NORMAL], the
[LightID] setting is disabled and xed to [OFF].
f The light output is decreased when [LightID] is set to anything other than [OFF].
When clogging of the lter is detected and the brightness of the light source is restricted, [LightID] will be xed to [OFF].
f Following setting will be disabled and it will be xed to [OFF] when [LightID] is set to anything other than [OFF].
g The [PICTURE] menu [DYNAMIC CONTRAST]
g The [PROJECTOR SETUP] menu [ECO MANAGEMENT] [AMBIENT LIGHT DETECTION] and [SIGNAL DETECTION]
f To set the Light ID signal, use “Multi Monitoring & Control Software”. The software can be downloaded from the Panasonic website (https://
panasonic.net/cns/projector/).
f The internal Light ID signal can be rewritten by executing the control command using the “Multi Monitoring & Control Software”. For details
of executing the control command, refer to the Operating Instructions of “Multi Monitoring & Control Software”.
f When the [PROJECTOR SETUP] menu [INITIALIZE] [ALL USER DATA] is executed, the [LightID] setting is reset to the factory default.
f For details of the contents list distribution function and Light ID control function of “Multi Monitoring & Control Software”, refer to the
Operating Instructions of “Multi Monitoring & Control Software”.
f The projected image may icker when the Light ID signal is transmitted, but this is caused luminance change during the transmission of the
Light ID, and it is not a malfunction.
f When clogging of the lter is detected and the brightness of the light source is restricted, the lter indicator <FILTER> lights up and [LightID]
is set to [OFF], and the Light ID signal will not be transmitted. Set it again after cleaning the clogged lter.
For details on how to solve the lter clogging, refer to “When an indicator lights up” (x page 198).

[INITIAL STARTUP]

Set the startup method when the <MAIN POWER> switch is set to <ON>.

1) Press as to select [INITIAL STARTUP].

2) Press qw to switch the item.

f The items will switch each time you press the button.

[LAST MEMORY]
Starts up the projector in the condition before the <MAIN POWER> switch is set to <OFF>.
[STANDBY]
Starts up the projector in standby.
[ON]
Starts projecting immediately.

[STARTUP INPUT SELECT]

Set the input when the projector is switched on to start projection.

1) Press as to select [STARTUP INPUT SELECT].

2) Press the <ENTER> button.

f The [STARTUP INPUT SELECT] screen is displayed.

3) Press asqw to select the input, and press the <ENTER> button.

[LAST USED]
Keeps the input selected last.
[RGB1]
Sets the input to RGB1.
[RGB2]
Sets the input to RGB2.
[VIDEO]
Sets the input to VIDEO.

Manual

View the manual for the Panasonic PT-MZ770EJ here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-MZ770EJ or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Panasonic and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Panasonic PT-MZ770EJ specifications

Below you will find the product specifications and the manual specifications of the Panasonic PT-MZ770EJ.

General
BrandPanasonic
ModelPT-MZ770EJ | PT-MZ770EJ
Productvideo projector
LanguageEnglish
FiletypeUser manual (PDF)
Projector
Projector native resolutionWUXGA (1920x1200)
Projector brightness8000 ANSI lumens
Projection technologyLCD
Contrast ratio (typical)-
Native aspect ratio16:10
Screen size compatibility40 - 400 "
Projection distance1.02 - 10.16 m
Contrast ratio (dynamic)3000000:1
Keystone correction, horizontal-35 - 35 °
Keystone correction, vertical-35 - 35 °
Multimedia
Built-in speaker(s)Yes
RMS rated power10 W
Light source
Service life of light source- h
Design
Product typeLarge venue projector
Product colorWhite
Housing materialABS, Plastic
Market positioning-
PlacementDesktop
Lens system
Focal length range26.8 - 45.5 mm
Aperture range (F-F)1.7 - 2.3
Throw ratio1.6 - 2.8:1
Display
Built-in display-
Power
Power sourceAC
Power consumption (standby)- W
AC input frequency50 - 60 Hz
AC input voltage100 - 240 V
Video
Analog signal format system-
Full HDYes
3DNo
Ports & interfaces
VGA (D-Sub) ports quantity4
HDMI ports quantity2
Composite video in0
Component video (YPbPr/YCbCr) in0
DVI portNo
USB 2.0 ports quantity1
Audio (L/R) in2
Audio (L/R) out1
S-Video inputs quantity-
BNC input ports5
DC-in jackYes
Network
Ethernet LAN (RJ-45) ports2
Smart TVNo
Ethernet LANYes
Wi-FiNo
Operational conditions
Operating temperature (T-T)0 - 45 °C
Operating relative humidity (H-H)20 - 80 %
Other features
RS-232 ports-
Weight & dimensions
Weight17100 g
Width560 mm
Depth443 mm
Height205 mm
Packaging content
Handheld remote control-
Storage
Card reader integrated-
Features
Noise level35 dB
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Panasonic PT-MZ770EJ below.

What is the weight of the Panasonic PT-MZ770EJ?

The Panasonic PT-MZ770EJ has a weight of 17100 g.

What is the height of the Panasonic PT-MZ770EJ?

The Panasonic PT-MZ770EJ has a height of 205 mm.

What is the width of the Panasonic PT-MZ770EJ?

The Panasonic PT-MZ770EJ has a width of 560 mm.

What is the depth of the Panasonic PT-MZ770EJ?

The Panasonic PT-MZ770EJ has a depth of 443 mm.

Is the manual of the Panasonic PT-MZ770EJ available in English?

Yes, the manual of the Panasonic PT-MZ770EJ is available in English .

Is your question not listed? Ask your question here

No results