3) Press as to select an item, and press the <ENTER> button.
[START]
Starts the count.
[STOP]
Stops the count.
[RESTART]
Restarts the count.
[RESET]
Resets the count.
[EXIT]
Ends the presentation timer.
fElapsed time or remaining time is displayed in the bottom right of the projected image when [START] or
[RESTART] is selected.
fThe elapsed time or remaining time when it was stopped is displayed in the bottom right of the projected
image when [STOP] is selected.
Note
fThe presentation timer can be operated by the <P-TIMER> button on the remote control. (x page 76)
fThe security message set in the [SECURITY] menu → [DISPLAY SETTING] (x page 136) is not displayed while the elapsed time or
remaining time is displaying.
fThe elapsed time or remaining time is not displayed while the menu screen is displayed.
fWhen [MODE] is set to [COUNT UP], the start time will be “000:00”.
fWhen [MODE] is set to [COUNT DOWN], the start time will be the value set in [TIMER].
fThe timer gauge will turn clockwise when set to [COUNT UP], and turn counterclockwise when set to [COUNT DOWN].
[FREEZE]
The projected image is paused and audio is turned off regardless of the playback of the external device.
1) Press as to select [FREEZE].
2) Press the <ENTER> button.
fPress the <MENU> button or the <RETURN> button to clear.
Note
f[FREEZE] is displayed on the screen when video is paused.
fOperation of [FREEZE] can also be performed with the <FREEZE> button on the remote control. (x page 73)
[DIGITAL ZOOM]
(When RGB signal for still images, HDMI signal for still images, or DIGITAL LINK signal for still images is input.
Or, when MEMORY VIEWER, Panasonic APPLICATION, or MIRRORING is input.)
1) Press as to select [DIGITAL ZOOM].
2) Press the <ENTER> button.
fThe [DIGITAL ZOOM] individual adjustment screen is displayed.
3) Press qw to adjust the magnification factor.
fThe magnication factor can be adjusted from 1.0 times to 3.0 times in 0.1 intervals.
4) Press the <ENTER> button.
fThe move screen is displayed.
5) Moving the enlargement area
fFor details, refer to “Using the digital zoom function” (x page 75).
Note
fThe digital zoom is canceled when the <AUTO SETUP/CANCEL> button on the remote control or the <LENS/CANCEL> button on the
control panel is pressed while performing the digital zoom.
fThe adjustment value of the digital zoom is canceled when the type of input signal is changed while performing the digital zoom.
fThe freeze function is disabled while performing the digital zoom.
fThe digital zoom will not operate in some of the still image signals.
Manual
View the manual for the Panasonic PT-MZ770EJ here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-MZ770EJ or do you need help? Ask your question here
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0