fThe items will switch each time you press the button.
[ON]
Holds the cursor position.
[OFF]
Does not hold the cursor position.
Note
fEven if [ON] is set, the cursor position is not maintained when the power is turned off.
Setting [INPUT GUIDE]
Set whether to display the input guide in the position set in [OSD POSITION].
Input guide is a screen to display information such as the currently selected input terminal name, signal name,
memory number, etc.
1) Press as to select [ON-SCREEN DISPLAY].
2) Press the <ENTER> button.
fThe [ON-SCREEN DISPLAY] screen is displayed.
3) Press as to select [INPUT GUIDE].
4) Press qw to switch the item.
fThe items will switch each time you press the button.
[ON]
Displays the input guide.
[OFF]
Hides the input guide.
Setting [WARNING MESSAGE]
Set the display/hide of the warning message.
1) Press as to select [ON-SCREEN DISPLAY].
2) Press the <ENTER> button.
fThe [ON-SCREEN DISPLAY] screen is displayed.
3) Press as to select [WARNING MESSAGE].
4) Press qw to switch the item.
fThe items will switch each time you press the button.
[ON]
Displays the warning message.
[OFF]
Hides the warning message.
Note
fWhen [OFF] is set, a warning message is not displayed on the projected image even if a warning condition such as [TEMPERATURE
WARNING] is detected while using the projector.
The message prompting to clean/replace the lter is also not displayed.
[CLOSED CAPTION SETTING] (only when NTSC signal is input)
Set closed captions.
Selecting the closed caption display
1) Press as to select [CLOSED CAPTION SETTING].
2) Press the <ENTER> button.
fThe [CLOSED CAPTION SETTING] screen is displayed.
Manual
View the manual for the Panasonic PT-MZ770EJ here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-MZ770EJ or do you need help? Ask your question here
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0