[1440x900p], [1600x900p], [1600x1200p], [1680x1050p], [1920x1080p], [1920x1080i], or [1920x1200p].
8) Press the <ENTER> button.
fThe [VERTICAL SCAN FREQUENCY] screen is displayed.
9) Press qw to select [VERTICAL SCAN FREQUENCY].
fSelect [60Hz], [50Hz], [30Hz], [25Hz], or [24Hz] when [1920x1080p] is selected for [RESOLUTION].
fSelect [60Hz], [50Hz], or [48Hz] when [1920x1080i] is selected for [RESOLUTION].
fSelect [60Hz] or [50Hz] when anything other than following is selected for [RESOLUTION].
g[1920x1080p], [1920x1080i]
10) Press the <ENTER> button.
fThe conrmation screen is displayed.
11) Press qw to select [OK], and press the <ENTER> button.
Note
fThe content set in [RESOLUTION] and [VERTICAL SCAN FREQUENCY] is displayed in the [RGB IN] screen.
fSetting of the resolution and the vertical scanning frequency may be necessary on the computer or video device in use.
fThe computer, video device, or projector in use may require the power to be turned off and on again after setting.
fThe output with the set resolution or vertical scanning frequency may not be possible depending on the computer or video device in use.
[HDMI IN]
Set this item in accordance with the video signal input to the <HDMI 1 IN> terminal or the <HDMI 2 IN> terminal.
Setting [SIGNAL LEVEL] in [HDMI IN]
1) Press as to select [HDMI IN].
2) Press the <ENTER> button.
fThe [HDMI IN] screen is displayed.
3) Press as to select [SIGNAL LEVEL] of [HDMI1] or [HDMI2].
4) Press qw to switch the item.
fThe items will switch each time you press the button.
[AUTO]
Automatically sets the signal level.
[64-940]
Select this item when the signal output from the HDMI terminal of the external device (such as a Blu-
ray disc player) is input to the <HDMI 1 IN> terminal or the <HDMI 2 IN> terminal.
[0-1023]
Select this item when the signal output from the DVI-D terminal of the external device (such as a
computer) is input to the <HDMI 1 IN> terminal or the <HDMI 2 IN> terminal using a conversion cable,
etc.
Select this item also when the signal output from the HDMI terminal of a computer, etc., is input to the
<HDMI 1 IN> terminal or the <HDMI 2 IN> terminal.
Note
fThe optimal setting varies depending on the output setting of the connected external device. Refer to the operating instructions of the
external device regarding the output of the external device.
fThe HDMI signal level is displayed for 30 bits of input.
Setting [EDID SELECT] in [HDMI IN]
(Only for PT-MZ770)
1) Press as to select [HDMI IN].
Manual
View the manual for the Panasonic PT-MZ770EJ here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-MZ770EJ or do you need help? Ask your question here
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0