Correct to the optimum image position for the set screen when the aspect ratio of a projected image is changed.
Set as necessary for the screen in use.
1) Press as to select [SCREEN SETTING].
2) Press the <ENTER> button.
f The [SCREEN SETTING] screen is displayed.
3) Press qw to switch the [SCREEN FORMAT] item.
f The items will switch each time you press the button.
Model No.[SCREEN FORMAT]Range when [SCREEN POSITION] is selected
PT-MZ770
[16:10]
Cannot be adjusted.
[4:3]
Adjusts the horizontal position between
-
160 and 160.
[16:9]
Adjusts the vertical position between
-
60 and 60.
PT-MW730
[16:10]
Cannot be adjusted.
[4:3]
Adjusts the horizontal position between
-
107 and 107.
[16:9]
Adjusts the vertical position between
-
40 and 40.
4) Press as to select [SCREEN POSITION].
f[SCREEN POSITION] cannot be selected or adjusted when [SCREEN FORMAT] is set to [16:10].
5) Press qw to adjust [SCREEN POSITION].
[AUTO SIGNAL]
Set whether to execute automatic setup of signals automatically.
The screen display position or signal level can be adjusted automatically without pressing the <AUTO SETUP/
CANCEL> button on the remote control on each occasion if you input unregistered signals frequently at meetings,
etc.
1) Press as to select [AUTO SIGNAL].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
Sets the auto signal function to off.
[ON]
Executes automatic setup automatically when images are changed to unregistered signals during
projection.
[AUTO SETUP]
Set this function when adjusting a special signal for still image signal, or horizontally long (such as 16:9) signal.
Setting with [MODE]
1) Press as to select [AUTO SETUP].
2) Press the <ENTER> button.
f The [AUTO SETUP] screen is displayed.
3) Press as to select [MODE].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[DEFAULT]
Standard setting.
[WIDE]
Select this item when an image aspect ratio is a wide-screen signal, which does not meet the
[DEFAULT] setting.
[USER]
Select this when receiving a signal with a special horizontal resolution (number of display dots).
fProceed to Step 7) when [DEFAULT] or [WIDE] is selected.
Manual
View the manual for the Panasonic PT-MZ770EJ here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-MZ770EJ or do you need help? Ask your question here
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0