On the menu screen, select [PICTURE] from the main menu, and select an item from the sub‑menu.
Refer to “Navigating through the menu” (x page 80) for the operation of the menu screen.
[PICTURE MODE]
You can switch to the desired picture mode suitable for the image source and the environment in which the
projector is used.
1) Press as to select [PICTURE MODE].
2) Press qw or the <ENTER> button.
fThe [PICTURE MODE] individual adjustment screen is displayed.
3) Press qw to switch the item.
f The items will switch each time you press the button.
[STANDARD]The image becomes suitable for moving images in general.
[DYNAMIC]The image becomes suitable for use in bright areas.
[DICOM SIM.]The image becomes similar to that of DICOM Part 14 Grayscale Standard.
[BLACKBOARD]The image becomes appropriate to project on a blackboard.
[WHITE BOARD]The image becomes appropriate to project on a whiteboard.
[CINEMA]
*1
The image becomes suitable for movie contents.
[NATURAL]
*2
The image becomes appropriate to use in a dark room.
*1 When movie signal is input
*2 When still image signal is input
Note
fDICOM is an abbreviation of “Digital Imaging and COmmunication in Medicine” and is a standard for medical imaging devices. Although the
DICOM name is used, the projector is not a medical device, and display images should not be used for medical purposes such as diagnosis.
[CONTRAST]
You can adjust the contrast of the colors.
1) Press as to select [CONTRAST].
2) Press qw or the <ENTER> button.
fThe [CONTRAST] individual adjustment screen is displayed.
3) Press qw to adjust the level.
OperationAdjustmentRange of adjustment
Press w.
The screen becomes brighter.
-
31 - +31
Press q.
The screen becomes darker.
Attention
fWhen it is necessary to adjust [CONTRAST] and [BRIGHTNESS], adjust the [PICTURE] menu → [BRIGHTNESS] rst.
[BRIGHTNESS]
You can adjust the dark (black) part of the projected image.
1) Press as to select [BRIGHTNESS].
2) Press qw or the <ENTER> button.
fThe [BRIGHTNESS] individual adjustment screen is displayed.
3) Press qw to adjust the level.
OperationAdjustmentRange of adjustment
Press w.
Increases the brightness of the dark (black) parts of the screen.
-
31 - +31
Press q.
Reduces the brightness of the dark (black) parts of the screen.
Manual
View the manual for the Panasonic PT-MZ670LEJ here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 7.8. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-MZ670LEJ or do you need help? Ask your question here
1024 x 768 (XGA),1280 x 1024 (SXGA),1280 x 720 (HD 720),1280 x 768 (WXGA),1280 x 800 (WXGA),1366 x 768,1400 x 1050 (SXGA+),1440 x 900 (WXGA+),1600 x 1200 (UXGA),1600 x 900,1680 x 1050 (WSXGA+),1920 x 1080 (HD 1080),1920 x 1200 (WUXGA)
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0