Review the following points. For details, see the corresponding pages.
ProblemsPoints to be checkedPage
Power does not turn on.
fIs the power plug rmly inserted into the outlet?―
fIs the <MAIN POWER> switch set to <OFF>?66
fIs the wall outlet supplying electricity?―
fHave the circuit breakers tripped?―
fIs the light source indicator <LIGHT> blinking?197
fIs the temperature indicator <TEMP> lit or blinking?198
No image appears.
fAre connections to external devices correctly performed?52
fIs the input selection setting correct?67
fIs the [BRIGHTNESS] adjustment setting at a minimum?85
fIs the external device that is connected to the projector working properly?―
fIs the shutter function in use?72, 109
fIf the power indicator <ON (G)/STANDBY (R)> is blinking in red, consult your dealer.―
Image is fuzzy.
fIs the lens focus set correctly?68
fIs the projection distance appropriate?38
fIs the lens dirty?26
fIs the projector installed perpendicular to the screen?―
Color is pale or grayish.
fAre [COLOR] and [TINT] adjusted correctly?86
fIs the external device connected to the projector adjusted correctly?52
fIs the computer cable damaged?―
Audio is not output.
fIs the external device connected correctly to the audio input terminal?33
fIs the volume set to minimum?73, 123
fIs the mute function used?72, 124
fIs [AUDIO IN SELECT] in [AUDIO SETTING] correctly set?124
fIs there a cable connected to the <VARIABLE AUDIO OUT> terminal? Audio is not
output from the built-in speaker when a cable is connected.
53, 124
Remote control does not
respond.
fAre the batteries depleted?―
fIs the polarity of the batteries set correctly?34
fAre there any obstructions between the remote control and the remote control
signal receiver of the projector?
30
fIs the remote control being used beyond its effective operation range?30
fAre other forms of light, such as uorescent light, affecting the projection?30
fIs the [REMOTE CONTROL] setting in [CONTROL DEVICE SETUP] set to
[DISABLE]?
138
fIs the ID number setting operation correct?77
Menu screen does not
appear.
fIs the on-screen display function turned off (hidden)?73
Buttons on the control
panel do not operate.
fIs the [CONTROL PANEL] setting in [CONTROL DEVICE SETUP] set to
[DISABLE]?
138
Image does not display
correctly.
fIs [SYSTEM SELECTOR] set properly?89
fIs there a problem with the video tape or other image sources?―
fIs a signal which is not compatible with the projector being input?218
Image from a computer
does not appear.
fIs the cable too long? (For D-Sub cables, the cable length should be 10 m (32'10")
or shorter.)
―
fIs the external video output on the laptop computer set correctly? (Ex.: The external
output settings may be switched by pressing the “Fn” + “F3” keys or the “Fn” + “F10”
keys simultaneously. This will differ depending on the model of the computer. Refer
to the user manual provided with your computer.)
―
Video from HDMI
compatible device does
not appear or it appears
jumbled.
fIs the HDMI cable connected securely?52
fTurn the power of the projector and the external device off and on.―
fIs a signal which is not compatible with the projector being input?218
No audio is coming from
the HDMI compatible
device.
fSet the audio for connected device to linear PCM.―
Manual
View the manual for the Panasonic PT-MZ670LEJ here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 7.8. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-MZ670LEJ or do you need help? Ask your question here
1024 x 768 (XGA),1280 x 1024 (SXGA),1280 x 720 (HD 720),1280 x 768 (WXGA),1280 x 800 (WXGA),1366 x 768,1400 x 1050 (SXGA+),1440 x 900 (WXGA+),1600 x 1200 (UXGA),1600 x 900,1680 x 1050 (WSXGA+),1920 x 1080 (HD 1080),1920 x 1200 (WUXGA)
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0