Panasonic PT-MZ670LEJ manual

Panasonic PT-MZ670LEJ
7.8 · 1
PDF manual
 · 229 pages
English
manualPanasonic PT-MZ670LEJ
Chapter 4Settings — [SIGNAL LIST] menu

134 - ENGLISH

Note
f A registered signal can also be deleted from [REGISTERED SIGNAL DELETE] on the [REGISTERED SIGNAL SETUP] screen.

Protecting the registered signal

1) Press asqw to select the signal to protect.
2) Press the <ENTER> button.
f The [REGISTERED SIGNAL STATUS] screen is displayed.
3) Press the <ENTER> button.
f The [REGISTERED SIGNAL SETUP] screen is displayed.
4) Press as to select [LOCK].
5) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF] The signal is not protected.
[ON] The signal is protected.
f A lock icon is displayed at the right of the [REGISTERED SIGNAL LIST] screen when [LOCK] is set to
[ON].
XXXX
RGB2
RGB2
A3: XGA75-A3
A1: 720/60p-A1
A2: XXXXXX-A2
Note
f When [LOCK] is set to [ON], signal deletion, image adjustment, and automatic setup are not available. To perform these operations, set
[LOCK] to [OFF].
f A signal can be registered to the sub memory even if it is protected.
f Even a protected signal will be deleted if [INITIALIZE] is executed.

Expanding signal lock-in range

1) Press asqw to select the signal to set.
2) Press the <ENTER> button.
f The [REGISTERED SIGNAL STATUS] screen is displayed.
3) Press the <ENTER> button.
f The [REGISTERED SIGNAL SETUP] screen is displayed.
4) Press as to select [LOCK-IN RANGE].
5) Press qw to switch the item.
f The items will switch each time you press the button.
[NARROW] Select this item usually.
[WIDE] Widens the lock-in range.
f An expansion icon is displayed at the right of the [REGISTERED SIGNAL LIST] screen when [LOCK-IN
RANGE] is set to [WIDE].
XXXX
RGB2
RGB2
A3: XGA75-A3
A1: 720/60p-A1
A2: XXXXXX-A2
Note
f Switch the range where the signal to be input is determined to be the same signal as the already registered signal.
f To prioritize the determination that a signal is the same as the already registered signal, set this function to [WIDE].
f Use in cases such as when the synchronizing frequency of a signal to be input has changed slightly, or multiple signal lists are registered.
f This function can be used only when a signal is input from the <RGB 1 IN> terminal, the <RGB 2 IN> terminal, <HDMI 1 IN> terminal, the
<HDMI 2 IN> terminal, or the <DIGITAL LINK/LAN> terminal.
f When [WIDE] is set, the image may be distorted because a signal is recognized as the same even if its synchronizing frequency varies
slightly.
f When a signal to be input corresponds to multiple signals set in [WIDE], a registered signal with a high memory number receives priority.
Example: a signal to be input that corresponds to memory numbers A2, A4 and B1 will be determined to be B1.

Manual

View the manual for the Panasonic PT-MZ670LEJ here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 7.8. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-MZ670LEJ or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Panasonic and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Panasonic PT-MZ670LEJ specifications

Below you will find the product specifications and the manual specifications of the Panasonic PT-MZ670LEJ.

General
BrandPanasonic
ModelPT-MZ670LEJ | PT-MZ670LEJ
Productvideo projector
EAN5025232870608
LanguageEnglish
FiletypeUser manual (PDF)
Weight & dimensions
Package weight24900 g
Package width776 mm
Package depth587 mm
Package height362 mm
Weight16300 g
Width560 mm
Depth428 mm
Height185 mm
Projector
Projector brightness6500 ANSI lumens
Projection technology3LCD
Projector native resolutionWUXGA (1920x1200)
Contrast ratio (typical)-
Contrast ratio (dynamic)3000000:1
Native aspect ratio16:10
Screen size compatibility40 - 400 "
Supported aspect ratios4:3, 16:9, 17:10
Projection distance- m
Vertical scan range24 - 100 Hz
Horizontal scan range15 - 91 kHz
Uniformity90 %
Keystone correction, horizontal-25 - 25 °
Keystone correction, vertical-30 - 30 °
Matrix size0.76 "
Features
HDCPYes
Preset modesBlackboard, Cinema, Dynamic, Standard, Whiteboard
On Screen Display (OSD) languagesARA, DAN, DEU, DUT, ENG, ESP, FIN, FRE, HUN, ITA, JPN, KAZ, NOR, POL, POR, RUM, RUS, SWE, THA, TUR, VIE
On Screen Display (OSD)Yes
Dot clock scanning frequency162 MHz
Air filterYes
Sync-on-green (SOG)Yes
Password protection typeSupervisor, User
Noise level32 dB
Multimedia
Built-in speaker(s)Yes
Number of built-in speakers1
RMS rated power10 W
Image formats supportedBMP, JPEG, JPG
Video formats supportedAVC, AVI, H.264, M-JPEG, MOV, MP4, MPEG, MPEG2, MPEG4, MPG, WMV, WMV9
Audio formats supportedAAC, LC-AAC, LPCM, MP3, WMA
Light source
Service life of light source20000 h
Light source typeLaser
Design
Product typeLarge venue projector
Product colorWhite
Housing materialABS, Polycarbonate (PC)
LED indicatorsYes
Cable lock slotYes
Cable lock slot typeKensington
PlacementDesktop
Lens system
Focal length range- mm
Horizontal lens shift range-35 - 35 %
Vertical lens shift range-67 - 67 %
Display
Built-in display-
Video
Analog signal format systemNTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM
Full HDYes
3D-
Supported video modes480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Supported graphics resolutions1024 x 768 (XGA),1280 x 1024 (SXGA),1280 x 720 (HD 720),1280 x 768 (WXGA),1280 x 800 (WXGA),1366 x 768,1400 x 1050 (SXGA+),1440 x 900 (WXGA+),1600 x 1200 (UXGA),1600 x 900,1680 x 1050 (WSXGA+),1920 x 1080 (HD 1080),1920 x 1200 (WUXGA)
Power
Power sourceAC
Power consumption (typical)525 W
Power consumption (standby)22 W
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Ports & interfaces
VGA (D-Sub) ports quantity2
HDMI ports quantity2
Composite video in1
Component video (YPbPr/YCbCr) in1
DVI portNo
HDMI connector typeFull-size
HDBaseT portYes
USB 2.0 ports quantity2
Audio (L/R) in1
Headphone outputs1
Microphone inYes
Serial interface typeRS-232
S-Video inputs quantity0
BNC input ports5
PC in (D-Sub)Yes
Network
Ethernet LAN (RJ-45) ports2
Smart TV-
Ethernet LANYes
Wi-Fi-
Ethernet LAN data rates10, 100 Mbit/s
Software
Windows operating systems supportedYes
Mac compatibilityYes
Mac operating systems supportedYes
Mobile operating systems supportedAndroid, iOS
Operational conditions
Operating temperature (T-T)0 - 45 °C
Operating relative humidity (H-H)20 - 80 %
Other features
RS-232 ports1
Packaging content
Handheld remote controlYes
Remote control typeIR
Cables includedAC
Batteries includedYes
ManualYes
Storage
Card reader integratedNo
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Panasonic PT-MZ670LEJ below.

What is the weight of the Panasonic PT-MZ670LEJ?

The Panasonic PT-MZ670LEJ has a weight of 16300 g.

What is the height of the Panasonic PT-MZ670LEJ?

The Panasonic PT-MZ670LEJ has a height of 185 mm.

What is the width of the Panasonic PT-MZ670LEJ?

The Panasonic PT-MZ670LEJ has a width of 560 mm.

What is the depth of the Panasonic PT-MZ670LEJ?

The Panasonic PT-MZ670LEJ has a depth of 428 mm.

Is the manual of the Panasonic PT-MZ670LEJ available in English?

Yes, the manual of the Panasonic PT-MZ670LEJ is available in English .

Is your question not listed? Ask your question here

No results