Panasonic PT-MZ670LEJ manual

Panasonic PT-MZ670LEJ
7.8 · 1
PDF manual
 · 229 pages
English
manualPanasonic PT-MZ670LEJ
Chapter 4Settings — [SIGNAL LIST] menu

ENGLISH - 133

[SIGNAL LIST] menu

On the menu screen, select [SIGNAL LIST] from the main menu.
Refer to “Navigating through the menu” (x page 80) for the operation of the menu screen.
r Registered signal details
A1 (1-2)
When the address number (A1, A2, ... L7, L8) signal is registered
Sub memory number
Memory number:
f A name can be set for each sub memory (x page 135).

Registering new signals

After a new signal is input and the <MENU> button on the remote control or the control panel is pressed, the
registration is completed and the [MAIN MENU] screen is displayed.
Note
f Up to 96 signals, including sub memories, can be registered to the projector.
f There are 12 pages (eight memories of A through L, with eight memories possible on each page) for memory numbers, and the signal is
registered to the lowest number that is available. If there is no available memory number it will be overwritten from the oldest signal.
f The name to be registered is automatically determined by the input signal.
f If a menu is being displayed, the new signals will be registered at the instant they are input.

Renaming the registered signal

Registered signals can be renamed.
1) Press asqw to select the signal of which name is to be changed.
2) Press the <ENTER> button.
f The [REGISTERED SIGNAL STATUS] screen is displayed.
f The memory number, input terminal, input signal name, frequency, synch polarity, etc., are displayed.
f Press the <MENU> button to return to the [REGISTERED SIGNAL LIST] screen.
3) Press the <ENTER> button.
f The [REGISTERED SIGNAL SETUP] screen is displayed.
4) Press as to select [SIGNAL NAME CHANGE].
5) Press the <ENTER> button.
f The [SIGNAL NAME CHANGE] screen is displayed.
6) Press asqw to select the text, and press the <ENTER> button to enter the text.
7) After the name is changed, press asqw to select [OK], and press the <ENTER> button.
f The registration is completed and the [REGISTERED SIGNAL SETUP] screen returns.
f When pressing asqw to select [CANCEL] and pressing the <ENTER> button, the changed signal name
will not be registered and an automatically registered signal name will be used.

Deleting the registered signal

Registered signals can be deleted.
1) Press asqw to select the signal to delete.
2) Press the <DEFAULT> button on the remote control.
f The [REGISTERED SIGNAL DELETE] screen is displayed.
f To cancel the deletion, press the <MENU> button to return to the [REGISTERED SIGNAL LIST] screen.
3) Press the <ENTER> button.
f The selected signal will be deleted.

Manual

View the manual for the Panasonic PT-MZ670LEJ here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 7.8. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-MZ670LEJ or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Panasonic and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Panasonic PT-MZ670LEJ specifications

Below you will find the product specifications and the manual specifications of the Panasonic PT-MZ670LEJ.

General
BrandPanasonic
ModelPT-MZ670LEJ | PT-MZ670LEJ
Productvideo projector
EAN5025232870608
LanguageEnglish
FiletypeUser manual (PDF)
Weight & dimensions
Package weight24900 g
Package width776 mm
Package depth587 mm
Package height362 mm
Weight16300 g
Width560 mm
Depth428 mm
Height185 mm
Projector
Projector brightness6500 ANSI lumens
Projection technology3LCD
Projector native resolutionWUXGA (1920x1200)
Contrast ratio (typical)-
Contrast ratio (dynamic)3000000:1
Native aspect ratio16:10
Screen size compatibility40 - 400 "
Supported aspect ratios4:3, 16:9, 17:10
Projection distance- m
Vertical scan range24 - 100 Hz
Horizontal scan range15 - 91 kHz
Uniformity90 %
Keystone correction, horizontal-25 - 25 °
Keystone correction, vertical-30 - 30 °
Matrix size0.76 "
Features
HDCPYes
Preset modesBlackboard, Cinema, Dynamic, Standard, Whiteboard
On Screen Display (OSD) languagesARA, DAN, DEU, DUT, ENG, ESP, FIN, FRE, HUN, ITA, JPN, KAZ, NOR, POL, POR, RUM, RUS, SWE, THA, TUR, VIE
On Screen Display (OSD)Yes
Dot clock scanning frequency162 MHz
Air filterYes
Sync-on-green (SOG)Yes
Password protection typeSupervisor, User
Noise level32 dB
Multimedia
Built-in speaker(s)Yes
Number of built-in speakers1
RMS rated power10 W
Image formats supportedBMP, JPEG, JPG
Video formats supportedAVC, AVI, H.264, M-JPEG, MOV, MP4, MPEG, MPEG2, MPEG4, MPG, WMV, WMV9
Audio formats supportedAAC, LC-AAC, LPCM, MP3, WMA
Light source
Service life of light source20000 h
Light source typeLaser
Design
Product typeLarge venue projector
Product colorWhite
Housing materialABS, Polycarbonate (PC)
LED indicatorsYes
Cable lock slotYes
Cable lock slot typeKensington
PlacementDesktop
Lens system
Focal length range- mm
Horizontal lens shift range-35 - 35 %
Vertical lens shift range-67 - 67 %
Display
Built-in display-
Video
Analog signal format systemNTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM
Full HDYes
3D-
Supported video modes480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Supported graphics resolutions1024 x 768 (XGA),1280 x 1024 (SXGA),1280 x 720 (HD 720),1280 x 768 (WXGA),1280 x 800 (WXGA),1366 x 768,1400 x 1050 (SXGA+),1440 x 900 (WXGA+),1600 x 1200 (UXGA),1600 x 900,1680 x 1050 (WSXGA+),1920 x 1080 (HD 1080),1920 x 1200 (WUXGA)
Power
Power sourceAC
Power consumption (typical)525 W
Power consumption (standby)22 W
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Ports & interfaces
VGA (D-Sub) ports quantity2
HDMI ports quantity2
Composite video in1
Component video (YPbPr/YCbCr) in1
DVI portNo
HDMI connector typeFull-size
HDBaseT portYes
USB 2.0 ports quantity2
Audio (L/R) in1
Headphone outputs1
Microphone inYes
Serial interface typeRS-232
S-Video inputs quantity0
BNC input ports5
PC in (D-Sub)Yes
Network
Ethernet LAN (RJ-45) ports2
Smart TV-
Ethernet LANYes
Wi-Fi-
Ethernet LAN data rates10, 100 Mbit/s
Software
Windows operating systems supportedYes
Mac compatibilityYes
Mac operating systems supportedYes
Mobile operating systems supportedAndroid, iOS
Operational conditions
Operating temperature (T-T)0 - 45 °C
Operating relative humidity (H-H)20 - 80 %
Other features
RS-232 ports1
Packaging content
Handheld remote controlYes
Remote control typeIR
Cables includedAC
Batteries includedYes
ManualYes
Storage
Card reader integratedNo
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Panasonic PT-MZ670LEJ below.

What is the weight of the Panasonic PT-MZ670LEJ?

The Panasonic PT-MZ670LEJ has a weight of 16300 g.

What is the height of the Panasonic PT-MZ670LEJ?

The Panasonic PT-MZ670LEJ has a height of 185 mm.

What is the width of the Panasonic PT-MZ670LEJ?

The Panasonic PT-MZ670LEJ has a width of 560 mm.

What is the depth of the Panasonic PT-MZ670LEJ?

The Panasonic PT-MZ670LEJ has a depth of 428 mm.

Is the manual of the Panasonic PT-MZ670LEJ available in English?

Yes, the manual of the Panasonic PT-MZ670LEJ is available in English .

Is your question not listed? Ask your question here

No results