Audio connected to the <AUDIO IN 1> terminal is output during projection of image from the set input
terminal.
[AUDIO IN 2]
Audio connected to the <AUDIO IN 2> terminal is output during projection of image from the set input
terminal.
[AUDIO IN 3]
Audio connected to the <AUDIO IN 3> terminal is output during projection of image from the set input
terminal.
[HDMI1 AUDIO IN]
*1
Audio input to HDMI1 is output.
[HDMI2 AUDIO IN]
*2
Audio input to HDMI2 is output.
[DIGITAL LINK AUDIO IN]
*3
Audio input to DIGITAL LINK is output.
[NETWORK/USB AUDIO IN]
*4
Outputs the audio of MEMORY VIEWER, MIRRORING, or Panasonic APPLICATION.
*1 Only when the input signal is HDMI1
*2 Only when the input signal is HDMI2
*3 Only when the input signal is DIGITAL LINK
*4 Only when the input signal is MEMORY VIEWER, MIRRORING, or Panasonic APPLICATION
[FILTER COUNTER]
Check the runtime of the lter and set the cleaning/replacement cycle of the lter. Also, the runtime of the lter can
be reset.
1) Press as to select [FILTER COUNTER].
2) Press the <ENTER> button.
fThe [FILTER COUNTER] screen is displayed.
[FILTER COUNTER]Displays the runtime of the lter.
[TIMER]Sets the cleaning/replacement cycle of the lter.
[FILTER COUNTER RESET]Resets the runtime of the lter.
Setting [TIMER]
If the lter is to be cleaned/replaced periodically, set the cycle in hours. Once the runtime of the lter reaches
the set time, a message prompting to clean/replace the lter [FILTER COUNTER has reached the set time.] is
displayed on the projected image.
1) Press as to select [FILTER COUNTER].
2) Press the <ENTER> button.
fThe [FILTER COUNTER] screen is displayed.
3) Press as to select [TIMER].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]Select this item when a message is not to be displayed.
[1000 H] - [20000 H]
Select this item when a message is to be displayed. The cleaning/replacement cycle of the lter can
be set in 1 000 hour intervals.
Resetting [FILTER COUNTER]
Reset the runtime of the lter.
1) Press as to select [FILTER COUNTER].
2) Press the <ENTER> button.
fThe [FILTER COUNTER] screen is displayed.
3) Press as to select [FILTER COUNTER RESET].
4) Press the <ENTER> button.
5) The confirmation screen is displayed, so pressqw to select [OK], and press the <ENTER> button.
f Display of [FILTER COUNTER] will change to [0 H].
Manual
View the manual for the Panasonic PT-MZ670LEJ here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 7.8. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-MZ670LEJ or do you need help? Ask your question here
1024 x 768 (XGA),1280 x 1024 (SXGA),1280 x 720 (HD 720),1280 x 768 (WXGA),1280 x 800 (WXGA),1366 x 768,1400 x 1050 (SXGA+),1440 x 900 (WXGA+),1600 x 1200 (UXGA),1600 x 900,1680 x 1050 (WSXGA+),1920 x 1080 (HD 1080),1920 x 1200 (WUXGA)
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0