Panasonic PT-MZ670EJ manual

Panasonic PT-MZ670EJ
7.5 · 1
PDF manual
 · 229 pages
English
manualPanasonic PT-MZ670EJ
Chapter 3Basic Operations — Operating with the remote control

74 - ENGLISH

Using the automatic setup function

The image position when the HDMI signal is input, or the dot clock, clock phase, and image position when the
analog RGB signal is input can be adjusted automatically. (Analog RGB signal is a signal structured with dots just
like the computer signal.)
It is recommended to input an image with bright white borders at the edges and high-contrast black and white
characters when the automatic adjustment is being performed.
Avoid using images that include halftones or gradation, such as photographs and computer graphics.

button

1) Press the <AUTO SETUP/CANCEL> button.
f [PROGRESS] is displayed while automatic setup is being executed.
f [COMPLETE] is displayed when automatic setup has completed without any problem.
Note
f The clock phase may shift even if it has completed without any incident. In such a case, adjust the [POSITION] menu [CLOCK PHASE]
(x page 92).
f The automatic setup may not correctly adjust when a image that cannot determine the edge or dark image is input. In such a case, adjust
the following settings.
g [ADVANCED MENU] menu [INPUT RESOLUTION] (x page 97)
g [POSITION] menu [CLOCK PHASE] (x page 92)
g [POSITION] menu [SHIFT] (x page 90)
f Adjust special signals according to the [DISPLAY OPTION] menu [AUTO SETUP] (x page 101).
f Automatic adjustment may not be possible depending on the computer model.
f Automatic adjustment may not be possible for the synchronization signal for composite sync or SYNC ON GREEN.
f Image may be disrupted for a few seconds during automatic adjustment, but this is not a malfunction.
f Adjustment is required for each input signal.
f Automatic adjustment can be canceled by pressing the <MENU> button or the <RETURN> button during the automatic adjustment
operation.
f Even if a signal possible to perform the automatic setup is being input, it may not be able to adjust correctly if the automatic setup function is
used while the moving image is being input.
f If the [DISPLAY OPTION] menu [SIGNAL SEARCH] is set to [ON], the signal search function is activated when the <AUTO SETUP/
CANCEL> button is pressed while no signal is input.
For details of the signal search function, refer to the [DISPLAY OPTION] menu [SIGNAL SEARCH] (x page 108).

Using the screen adjustment function

The [SCREEN ADJUSTMENT] menu can be displayed.
Correct the distortion of the image that occurs when the projector is installed tilted or when the screen is tilted or
curved.

button

1) Press the <SCREEN ADJ> button.
f The [SCREEN ADJUSTMENT] screen is displayed.
2) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF] Disables the screen adjustment function.
[KEYSTONE] Adjusts any trapezoidal distortion in the projected image.
[CORNER CORRECTION] Adjusts any distortion in the four corners of the projected image.
[CURVED CORRECTION] Adjusts any curved distortion in the projected image.
f The items will also switch by pressing the <SCREEN ADJ> button.
f Proceed to Step 3) when anything other than [OFF] is selected.
3) Press the <ENTER> button.
f The [KEYSTONE] screen, the [CORNER CORRECTION] screen, or the [CURVED CORRECTION] screen
is displayed.

Manual

View the manual for the Panasonic PT-MZ670EJ here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-MZ670EJ or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Panasonic and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Panasonic PT-MZ670EJ specifications

Below you will find the product specifications and the manual specifications of the Panasonic PT-MZ670EJ.

General
BrandPanasonic
ModelPT-MZ670EJ | PT-MZ670EJ
Productvideo projector
EAN5025232870585
LanguageEnglish
FiletypeUser manual (PDF)
Projector
Projector brightness6500 ANSI lumens
Projection technology3LCD
Projector native resolutionWUXGA (1920x1200)
Contrast ratio (typical)-
Native aspect ratio16:10
Screen size compatibility40 - 400 "
Supported aspect ratios4:3, 16:10, 16:9
Projection distance- m
Uniformity90 %
Vertical scan range24 - 100 Hz
Horizontal scan range15 - 91 kHz
Keystone correction, horizontal-25 - 25 °
Keystone correction, vertical-30 - 30 °
Matrix size0.76 "
Features
HDCPYes
Preset modesBlackboard, Cinema, Dynamic, Standard, Whiteboard
On Screen Display (OSD)Yes
On Screen Display (OSD) languagesARA, DAN, DEU, DUT, ENG, ESP, FIN, FRE, HUN, ITA, JPN, NOR, POL, POR, RUM, RUS, SWE, THA, TUR, VIE
Dot clock scanning frequency162 MHz
Air filterYes
Sync-on-green (SOG)Yes
Password protectionYes
Password protection typeSupervisor, User
Noise reductionYes
Noise level32 dB
Multimedia
Built-in speaker(s)Yes
Number of built-in speakers1
RMS rated power10 W
Video formats supportedAVC, AVI, H.264, M-JPEG, MOV, MP4, MPEG, MPEG2, MPEG4, MPG, WMV, WMV9
Image formats supportedBMP, JPEG, JPG
Audio formats supportedAAC, LC-AAC, LPCM, MP3, WMA
Light source
Service life of light source20000 h
Light source typeLaser
Design
Product typeLarge venue projector
Product colorWhite
Housing materialABS, Polycarbonate (PC)
LED indicatorsYes
Cable lock slotYes
Cable lock slot typeKensington
PlacementDesktop, Ceiling
Lens system
Focal length range26.8 - 45.5 mm
Aperture range (F-F)1.7 - 2.3
Horizontal lens shift range-35 - 35 %
Vertical lens shift range-67 - 67 %
Throw ratio1.6 - 2.8:1
Display
Built-in display-
Video
Analog signal format systemNTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N
Full HDYes
3D-
Supported video modes480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Supported graphics resolutions1024 x 768 (XGA),1280 x 1024 (SXGA),1280 x 720 (HD 720),1280 x 768 (WXGA),1280 x 800 (WXGA),1366 x 768,1400 x 1050 (SXGA+),1440 x 900 (WXGA+),1600 x 1200 (UXGA),1600 x 900,1680 x 1050 (WSXGA+),1920 x 1080 (HD 1080),1920 x 1200 (WUXGA)
Power
Power sourceAC
Power consumption (typical)525 W
Power consumption (standby)22 W
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Ports & interfaces
VGA (D-Sub) ports quantity2
HDMI ports quantity2
Composite video in1
Component video (YPbPr/YCbCr) in1
DVI portNo
HDMI connector typeFull-size
HDBaseT portYes
USB 2.0 ports quantity2
Audio (L/R) in1
Headphone outputs1
Microphone inYes
Serial interface typeRS-232
S-Video inputs quantity0
BNC input ports5
PC in (D-Sub)Yes
Network
Ethernet LAN (RJ-45) ports2
Smart TV-
Ethernet LANYes
Wi-Fi-
Ethernet LAN data rates10, 100 Mbit/s
Software
Windows operating systems supportedYes
Mac compatibilityYes
Mac operating systems supportedYes
Mobile operating systems supportedAndroid, iOS
Operational conditions
Operating temperature (T-T)0 - 45 °C
Operating relative humidity (H-H)20 - 80 %
Other features
RS-232 ports1
Weight & dimensions
Package weight25600 g
Package width776 mm
Package depth587 mm
Package height362 mm
Weight16900 g
Width560 mm
Depth428 mm
Height185 mm
Packaging content
Handheld remote controlYes
Remote control typeIR
Cables includedAC
Batteries includedYes
ManualYes
Storage
Card reader integratedNo
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Panasonic PT-MZ670EJ below.

What is the weight of the Panasonic PT-MZ670EJ?

The Panasonic PT-MZ670EJ has a weight of 16900 g.

What is the height of the Panasonic PT-MZ670EJ?

The Panasonic PT-MZ670EJ has a height of 185 mm.

What is the width of the Panasonic PT-MZ670EJ?

The Panasonic PT-MZ670EJ has a width of 560 mm.

What is the depth of the Panasonic PT-MZ670EJ?

The Panasonic PT-MZ670EJ has a depth of 428 mm.

Is the manual of the Panasonic PT-MZ670EJ available in English?

Yes, the manual of the Panasonic PT-MZ670EJ is available in English .

Is your question not listed? Ask your question here

No results