f The items will switch each time you press the button.
[ON]
Enables the pairing function.
Detects the USB memory connected to the <VIEWER/PAIRING> terminal, and displays the guide to
execute the pairing in the standby screen.
[OFF]
Disables the pairing function.
Does not detect even if USB memory is connected to the <VIEWER/PAIRING> terminal.
Note
fThe [PAIRING GUIDE] setting is enabled when the Panasonic APPLICATION input is selected.
fFor the method of pairing the projector and the USB memory, refer to “Using the pairing function” (x page 194).
fFor the handling of the USB memory, refer to “Using the USB memory” (x page 70).
fFor how to use the image transfer application software “Plug and Share” allowing to easily connect via the wireless LAN by pairing the
commercially available USB memory with the projector, refer to following URL.
https://panasonic.net/cns/projector/
For the method of pairing the projector and the USB memory, refer to “Using the pairing function” (x page 194). By pairing, the connection
information between the image transfer application software “Plug and Share”, and the projector and the USB memory is written into the
USB memory.
[MIRRORING]
Set the operation when connecting a device to the projector using the mirroring function.
fTo use the mirroring function, it is necessary to attach the optional Wireless Module (Model No.: ET-WM300).
For details on how to attach the optional Wireless Module (Model No.: ET-WM300), refer to “Attaching the
Wireless Module” (x page 51).
Setting the connection
Set the connection by the mirroring function.
1) Press as to select [MIRRORING].
2) Press the <ENTER> button.
f The [MIRRORING] screen is displayed.
3) Press as to select an item, and press qw to change the setting.
[CONNECTION TYPE]
Select the connection method when performing the connection with the mirroring function to the
projector for the rst time.
[AUTO]Select this item when connecting automatically.
[PIN]
Select this item to display a PIN (eight-digit number) in the
MIRRORING input standby screen, and connect by entering that
PIN in the device side.
[CHANNEL]Select the channel to be used.
[MOBILE CONNECTION]
Select this item when the connectivity is bad. Set [OFF] normally.
[OFF]Disables the function.
[ON]Enables the function.
Note
fWhen [CONNECTION TYPE] is set to [AUTO] and the projector cannot be connected depending on the device in use, use the projector by
setting to [PIN].
fWhen connecting with a device that has previously connected to the projector with the mirroring function, it will connect automatically
regardless of the [CONNECTION TYPE] setting.
Setting [MODERATOR MODE]
Set if [MODERATOR MODE], which allows the moderator to specify the presenter when multiple devices are in
the condition to connect with the projector with mirroring, is enabled or not.
1) Press as to select [MIRRORING].
2) Press the <ENTER> button.
f The [MIRRORING] screen is displayed.
3) Press as to select [MODERATOR MODE].
Manual
View the manual for the Panasonic PT-MZ670EJ here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-MZ670EJ or do you need help? Ask your question here
1024 x 768 (XGA),1280 x 1024 (SXGA),1280 x 720 (HD 720),1280 x 768 (WXGA),1280 x 800 (WXGA),1366 x 768,1400 x 1050 (SXGA+),1440 x 900 (WXGA+),1600 x 1200 (UXGA),1600 x 900,1680 x 1050 (WSXGA+),1920 x 1080 (HD 1080),1920 x 1200 (WUXGA)
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0