Panasonic PT-MZ670EJ manual

Panasonic PT-MZ670EJ
7.5 · 1
PDF manual
 · 229 pages
English
manualPanasonic PT-MZ670EJ
Chapter 4Settings — [SIGNAL LIST] menu

ENGLISH - 135

f When a registration signal is deleted, the settings are also deleted.
f In an environment where multiple types of signals are input to the same terminal, signals are sometimes not determined correctly when the
setting is set to [WIDE].

Sub memory

The projector has a sub memory function that can register the multiple image adjustment data, even if it is
recognized as the same signal by the frequency or format of the synchronization signal source.
Use this function when you need to switch the aspect or adjust the picture quality such as the white balance
while using the same signal source. The sub memory includes all the data that can be adjusted for each signal,
such as the image aspect ratio and data adjusted in the [PICTURE] menu (items such as [CONTRAST] and
[BRIGHTNESS]).

Registering to the sub memory

1) While in the normal screen (where no menu is displayed), press as.
f The sub memory registration screen is displayed if the sub memory is not registered. Proceed to Step 3).
f A list of sub memories registered to the signal currently input is displayed.
f The <FUNCTION> button on the remote control can be used instead of as when [SUB MEMORY] is
selected from the [PROJECTOR SETUP] menu [FUNCTION BUTTON].
2) Press asqw to select the sub memory number to register in [SUB MEMORY LIST].
3) Press the <ENTER> button.
f The [SIGNAL NAME CHANGE] screen is displayed.
4) Press asqw to select [OK], and press the <ENTER> button.
f To rename the registered signal, follow the procedure in Steps 6) and 7) in “Renaming the registered signal”
(x page 133).

Switching to the sub memory

1) While in the normal screen (where no menu is displayed), press as.
f A list of sub memories registered to the signal currently input is displayed.
2) Press asqw to select the signal to switch in [SUB MEMORY LIST].
3) Press the <ENTER> button.
f This switches to the signal selected in Step 2).

Deleting the sub memory

1) While in the normal screen (where no menu is displayed), press as.
f The [SUB MEMORY LIST] screen is displayed.
2) Press asqw to select the sub memory to be deleted, and press the <DEFAULT> button on the
remote control.
f The [REGISTERED SIGNAL DELETE] screen is displayed.
f To cancel the deletion, press the <MENU> button to return to the [SUB MEMORY LIST] screen.
3) Press the <ENTER> button.
f The selected sub memory will be deleted.

Manual

View the manual for the Panasonic PT-MZ670EJ here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-MZ670EJ or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Panasonic and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Panasonic PT-MZ670EJ specifications

Below you will find the product specifications and the manual specifications of the Panasonic PT-MZ670EJ.

General
BrandPanasonic
ModelPT-MZ670EJ | PT-MZ670EJ
Productvideo projector
EAN5025232870585
LanguageEnglish
FiletypeUser manual (PDF)
Projector
Projector brightness6500 ANSI lumens
Projection technology3LCD
Projector native resolutionWUXGA (1920x1200)
Contrast ratio (typical)-
Native aspect ratio16:10
Screen size compatibility40 - 400 "
Supported aspect ratios4:3, 16:10, 16:9
Projection distance- m
Uniformity90 %
Vertical scan range24 - 100 Hz
Horizontal scan range15 - 91 kHz
Keystone correction, horizontal-25 - 25 °
Keystone correction, vertical-30 - 30 °
Matrix size0.76 "
Features
HDCPYes
Preset modesBlackboard, Cinema, Dynamic, Standard, Whiteboard
On Screen Display (OSD)Yes
On Screen Display (OSD) languagesARA, DAN, DEU, DUT, ENG, ESP, FIN, FRE, HUN, ITA, JPN, NOR, POL, POR, RUM, RUS, SWE, THA, TUR, VIE
Dot clock scanning frequency162 MHz
Air filterYes
Sync-on-green (SOG)Yes
Password protectionYes
Password protection typeSupervisor, User
Noise reductionYes
Noise level32 dB
Multimedia
Built-in speaker(s)Yes
Number of built-in speakers1
RMS rated power10 W
Video formats supportedAVC, AVI, H.264, M-JPEG, MOV, MP4, MPEG, MPEG2, MPEG4, MPG, WMV, WMV9
Image formats supportedBMP, JPEG, JPG
Audio formats supportedAAC, LC-AAC, LPCM, MP3, WMA
Light source
Service life of light source20000 h
Light source typeLaser
Design
Product typeLarge venue projector
Product colorWhite
Housing materialABS, Polycarbonate (PC)
LED indicatorsYes
Cable lock slotYes
Cable lock slot typeKensington
PlacementDesktop, Ceiling
Lens system
Focal length range26.8 - 45.5 mm
Aperture range (F-F)1.7 - 2.3
Horizontal lens shift range-35 - 35 %
Vertical lens shift range-67 - 67 %
Throw ratio1.6 - 2.8:1
Display
Built-in display-
Video
Analog signal format systemNTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N
Full HDYes
3D-
Supported video modes480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Supported graphics resolutions1024 x 768 (XGA),1280 x 1024 (SXGA),1280 x 720 (HD 720),1280 x 768 (WXGA),1280 x 800 (WXGA),1366 x 768,1400 x 1050 (SXGA+),1440 x 900 (WXGA+),1600 x 1200 (UXGA),1600 x 900,1680 x 1050 (WSXGA+),1920 x 1080 (HD 1080),1920 x 1200 (WUXGA)
Power
Power sourceAC
Power consumption (typical)525 W
Power consumption (standby)22 W
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Ports & interfaces
VGA (D-Sub) ports quantity2
HDMI ports quantity2
Composite video in1
Component video (YPbPr/YCbCr) in1
DVI portNo
HDMI connector typeFull-size
HDBaseT portYes
USB 2.0 ports quantity2
Audio (L/R) in1
Headphone outputs1
Microphone inYes
Serial interface typeRS-232
S-Video inputs quantity0
BNC input ports5
PC in (D-Sub)Yes
Network
Ethernet LAN (RJ-45) ports2
Smart TV-
Ethernet LANYes
Wi-Fi-
Ethernet LAN data rates10, 100 Mbit/s
Software
Windows operating systems supportedYes
Mac compatibilityYes
Mac operating systems supportedYes
Mobile operating systems supportedAndroid, iOS
Operational conditions
Operating temperature (T-T)0 - 45 °C
Operating relative humidity (H-H)20 - 80 %
Other features
RS-232 ports1
Weight & dimensions
Package weight25600 g
Package width776 mm
Package depth587 mm
Package height362 mm
Weight16900 g
Width560 mm
Depth428 mm
Height185 mm
Packaging content
Handheld remote controlYes
Remote control typeIR
Cables includedAC
Batteries includedYes
ManualYes
Storage
Card reader integratedNo
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Panasonic PT-MZ670EJ below.

What is the weight of the Panasonic PT-MZ670EJ?

The Panasonic PT-MZ670EJ has a weight of 16900 g.

What is the height of the Panasonic PT-MZ670EJ?

The Panasonic PT-MZ670EJ has a height of 185 mm.

What is the width of the Panasonic PT-MZ670EJ?

The Panasonic PT-MZ670EJ has a width of 560 mm.

What is the depth of the Panasonic PT-MZ670EJ?

The Panasonic PT-MZ670EJ has a depth of 428 mm.

Is the manual of the Panasonic PT-MZ670EJ available in English?

Yes, the manual of the Panasonic PT-MZ670EJ is available in English .

Is your question not listed? Ask your question here

No results