(If you have a loss of the remote control while the
CONTROL PANEL
is
invalidated, press and hold the
MENU
button for 2 seconds by pressing the
ENTER
button.)
46
The picture does not
display correctly.
T
z
he signal format (
TV-SYSTEM
,
RGB/YP
B
P
R
) may not have been set
correctly.
33
There may be a problem with the VCR or other signal source.
z
—
A signal which is not compatible with the projector is being input.
z
54
Picture from a computer
does not appear.
The RGB signal cable is too long. (Limit to 10 m (32'10").)
z
—
The external video output from a laptop computer may not be correct.
z
(You may be able to change the external output settings by pressing the
[Fn] + [F3] or [Fn] + [F10] keys simultaneously. The actual method varies
depending on the type of computer; refer to the documentation provided
with your computer for further details.)
38
The projector cannot be
controlled through serial
terminal.
EMULATE
z
in the PROJECTOR SETUP menu is not set correctly. (If you
fail to select your product series, ask your dealer for repair. )
42
Note
If the projector does not operate normally after the above remedies are taken, contact an Authorised Service Centre.
z
Manual
View the manual for the Panasonic PT-LB90E here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 5.5. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-LB90E or do you need help? Ask your question here
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0