Care and Replacement E
NGLISH - 49 Maintenance Care and Replacement Before Care and Replacement Before cleaning, be sure to turn off the power and disconnect the mains plug from the mains socket.
z
(
Æ
page 21)
Be sure to turn off the power as described in “Switching of f the projector”.
z
(
Æ
page 24)
Cleaning the projector Cabinet
J
Wipe off dirt and dust gently with a soft cloth.
Ifitisdifculttoremovethedirt,soakaclothwithwater ,wringtheclothwellandthenwipetheprojector .
z
Dry off the projector with dry cloth.
Do not use petroleum benzine, thinner , any alcoholic solvent, kitchen detergents or chemical clothes.
z
Failure to observe these may result in altered or damaged surfaces of the projector .
J
Lens cover Make sure no dirt or dust remains on the surface of the lens cover glass. It will be enlarged and projected onto
the screen.
Wipe off dirt and dust gently with a lint-free cloth. Do not wipe the lens cover with a cloth which has collected
dust.
Note
Clean the lens cover with special care. Giving a shock may cause serious damage.
z
J
Air lter Iftheairlterisexcessivelydirty ,theinternaltemperatureoftheprojectorincreases,theTEMP indicator
lights, and the power is turned off. If the power is turned of f, the TEMPindicatorashes.Cleantheairlter
regularly every 100 hours of usage.
1 ) Turn the projector upside down and place it gently on a soft cloth. Place the projector softly so that it will not be
z
damaged.
Pressthetabandslightlyslideuptheairlterto
z
remove.
T ab
Airlter
2 ) Clean the air lter. V acuumdirtanddustfromtheairlter .
3 ) Install the air lter. Remarks
Donotusetheprojectorwithoutattachingtheairlter .Otherwise,itwillsuckindirtanddustwhichcancause
z
malfunction.
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0