You can use the 7 different test patterns to adjust
the focus of the image. Press the ENTER button to
display the test pattern.
Change
pattern
Change
pattern
Press the MENU or RETURN button to return to the
PROJECTOR SETUP menu, or press repeatedly to
escape the menu mode.
Remarks
The initial screen is an all white pattern. Only when
z
TEST PATTERN is assigned to the FUNCTION
button, the lattice pattern will display in the initial
screen.
INITIALIZE ALL
You can reset all of the customised settings in the
MENU to the factory defaults.
If the
z
ENTER
button is pressed in the
INITIALIZE
ALL
menu,
INITIALIZE
ALL
will display. Select
OK
and press the
ENTER
button,
NOW
INITIALIZING...
is displayed. Then,
POWER
OFF
is displayed.
Select OK and turn off the power according to the
instruction. (All other buttons are deactivated.)
The
z
INITIAL SETTING
menu screen will display
when the power is connected.
(
Æ
page 13)
Remarks
The usage time of the projector, lamp runtime and
z
the NETWORK settings are not initialised.
When
z
PASSWORD in SECURITY menu is
activated, be sure to enter the correct password
when initialised.
After
z
INITIALIZE ALL operation is completed, the
password is reset to the factory default setting and
PASSWORD setting is turned OFF.
Manual
View the manual for the Panasonic PT-LB90E here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 5.5. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-LB90E or do you need help? Ask your question here
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0