Panasonic PT-LB90E manual

Panasonic PT-LB90E
5.5 · 1
PDF manual
 · 60 pages
English
manualPanasonic PT-LB90E

Remote control operation

E

NGLISH - 27

Basic Operation

Setting up the image position

automatically

When a RGB signal is input, the projector adjusts the
SHIFT, DOT CLOCK and CLOCK PHASE
automatically.
Press button.
Screen Projected image
Remarks
The
z
SIGNAL SEARCH operation is also performed.
(When SIGNAL SEARCH is set to ON)
(
Æ
page 39)
If the dot clock frequency is 108 MHz or higher,
z
DOT CLOCK and CLOCK PHASE are not
effective. (
Æ
page 34)
If the projected image is too dark or blurred around
z
the edge, AUTO SETUP may stop the processing
before completing the adjustment and return to the
previous setting. Project a much clearer or lighter
image and try again.

Resetting to the factory

default settings

You can reset most of the customised settings to the
factory default settings by pressing the DEFAULT
button of the remote control.
Press button.
For details, see “Menu Navigation - Navigating
z
through the MENU - Resetting to the factory default
settings”. (
Æ
page 29)

Controlling the volume of the

speaker

You can control the volume of the built-in speakers
and output audio sound.
Press button.
+ button: increases the volume
z
-
z
button: decreases the volume

Projecting an image

in INDEX-WINDOW mode

You can project an image split in 2 windows as an
INDEX WINDOW. One is frozen and stored in
memory,anddisplayedonthescreen’sleftsidewhile
displaying subsequent image continues on the right.
Press button.
Press the RETURN button to escape.
The image being projected when the INDEX-
WINDOW button is pressed will be a frozen image.
Frozen
image
Continuing
image
Projected
image
J
INDEX-WINDOW display
Press▲▼buttonsto
capture a new image
and change the size in 3
ways.
In default, the frozen
image is displayed on the
left and the subsequent
image is displayed on the
right.Press◄►buttons
to switch the position.
Frozen
image
Frozen
image
Frozen
image
Continuing
image
Continuing
image
Continuing
image
Frozen
Image
Continuing
image
Frozen
Image
Continuing
image
Remarks
The aspect ratio of the image is changed and
z
becomes vertically elongated.
If you change the window size, the aspect ratio of
z
the image is changed. (
Æ
page 35)
While in
z
INDEX-WINDOW mode, press the ENTER
button to capture a new image and the frozen
image window will be updated in a moment.
When capturing a quick moving picture, perform
z
several times to get a stable picture.

Manual

View the manual for the Panasonic PT-LB90E here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 5.5. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-LB90E or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Panasonic and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Panasonic PT-LB90E specifications

Below you will find the product specifications and the manual specifications of the Panasonic PT-LB90E.

General
BrandPanasonic
ModelPT-LB90E | PT-LB90E
Productvideo projector
EAN5025232544400, 5025232551514
LanguageEnglish
FiletypeUser manual (PDF)
Projector
Projector brightness3500 ANSI lumens
Projection technologyLCD
Projector native resolutionXGA (1024x768)
Contrast ratio (typical)500:1
Keystone correction, vertical±30 °
Vertical scan range50 - 85 Hz
Horizontal scan range15 - 91 kHz
Other features
Aspect ratio4:3
Lens focal range1.65 - 1.93
RS-232 ports1
Dimensions (WxDxH)368 x 233 x 88 mm
Power requirements100–240 V AC, 50/60 Hz
Light source
Lamp power220 W
Lamp typeUHM
Light source typeLamp
Lens system
Focal length range18.53 - 22.18 mm
Multimedia
Number of built-in speakers1
RMS rated power1 W
Ports & interfaces
S-Video inputs quantity1
Composite video in1
Audio (L/R) in1
Audio (L/R) out1
PC Audio inYes
VGA (D-Sub) ports quantity2
Serial interface typeRS-232
Weight & dimensions
Weight2960 g
Power
Power consumption (typical)300 W
Power consumption (standby)15 W
Operational conditions
Operating relative humidity (H-H)20 - 80 %
Operating temperature (T-T)0 - 40 °C
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Panasonic PT-LB90E below.

What is the weight of the Panasonic PT-LB90E?

The Panasonic PT-LB90E has a weight of 2960 g.

Is the manual of the Panasonic PT-LB90E available in English?

Yes, the manual of the Panasonic PT-LB90E is available in English .

Is your question not listed? Ask your question here

No results