The POWER indicator informs you of the status of the power and the POWER LOCK indicator shows the status
of the RELEASE button. When the TEMPindicatorsareashing,thePOWER and POWER LOCK indicators will
light red and you cannot switch the projector on.
POWER indicator
POWER LOCK indicator
J
POWER LOCK indicator status
Indicator statusStatus
Noilluminationorashing
No power is supplied.
z
The
z
RELEASE button is pressed and the POWER button is unlocked while
the power is on.
Red
LitThe POWER button is locked.
FlashingPressing the locked POWER button.
J
POWER indicator status
Indicator statusStatus
NoilluminationorashingNo power is supplied and the internal cooling fan is not operating.
Red
Lit
The power is turned off (when STANDBY MODE is set to ECO).
If the POWER button is pressed, projection starts.
FlashingThe power is turned off (when STANDBY MODE is set to NORMAL).
Green
FlashingThe power is on and preparing for projection.
LitThe projector is projecting.
Orange
Lit
No power supply and the internal fan is cooling the lamp by internal power
supply.
Flashing
The power is switched on again while cooling the lamp and recovering to the
projection mode. Recovery may take a while.
Remarks
When the power is turned off, the internal fan is cooling the lamp by internal power supply.
z
The power is switched on again while cooling the lamp and recovering to the projection mode. Recovery may
z
take a while.
Even while the power is turned off (when
z
STANDBY MODE is set to ECO, the POWER indicator is lit in red),
power of about 0.9 W is consumed.
Manual
View the manual for the Panasonic PT-LB90E here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 5.5. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-LB90E or do you need help? Ask your question here
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0