change the password to your original, perform to input
the following factory default password operation.
Press FHGIFHGI and ENTER.
Q After you change the password
When you apply to the SECURITY menu after you
change the password to your original in the
PASSWORD CHANGE menu, input the original
password operation.
You can activate the security system and the password
operation will be asked to perform when the projecting
mode started. Unless you perform the correct password
operation, all of the button controls will be disabled
except the POWER button.
OFFDeactive
ONActive
You can change the password operation to your original.
1.Press a series of button operation up to 8 as a
password by using FGI and H buttons.
2.Press ENTER.
3.Press the exact same series of button operation
you entered in the NEW password box for
confirmation.
If a series of button operation is incorrect, you will be
asked to perform again.
4.Press ENTER.
You can set your original text, such as company name or
URL information, to display regularly at the bottom of the
projected image while projecting.
OFFDeactive
ONActive
You can enter your original text up to 22 characters for
TEXT DISPLAY.
1.Use FG IH to specify the location of the
required character.
2.Press ENTER.
The selected character will be displayed in the TEXT
CHANGE box.
3.Repeat until finish your original text.
Select DELETE to delete the last entered character
and press ENTER.
4.Select OK and press ENTER to set the entered
text.
Select CANCEL or press MENU/RETURN buttons to
return to the previous menu.
NOTE:
•The factory default password is valid until you change
the password in PASSWORD CHANGE menu.
•The entered password operations will appear as
asterisks in the box.
INPUT PASSWORD
NOTE:
•When you activated the security system, make sure to
change the password to your original for safety.
•The factory default password is valid until you change
the password in PASSWORD CHANGE menu.
Remote controlControl panel
See “Navigating through the MENU” on page 29.
See “Main menu and Sub-menu” on page 30.
PICTURE
POSITION
INPUT PASSWORD
PASSWORD CHANGE
TEXT DISPLAY
TEXT CHANGE
PASSWORD
LANGUAGE
OPTION
SECURITY
NETWORK
OFF
OFF
SELECT
ENTER
RETURN
PASSWORD CHANGE
NOTE:
•The entered password operations will appear as
asterisks in the box.
TEXT DISPLAY
TEXT CHANGE
OKCANCEL
DELETE
TEXT CHANGE
Manual
View the manual for the Panasonic PT-F100NTE here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 9.4. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-F100NTE or do you need help? Ask your question here
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0