If you use the projector at high elevation, the HIGHLAND
setting need to be ON to set the fan speed high. Press
IH to select the required option.
OFFThe fan speed is low.
ONThe fan speed is high.
You can use the 7 different test patterns to adjust the
focus of the image. See “Lens shift and positioning” on
page 18.
1.Press ENTER to display the test pattern 1.
2.Press IH to select the required test pattern.
3.Adjust the focus with the Focus lever.
4.Press MENU or RETURN to return to the previous
menu, oar press repeatedly to escape the menu
mode.
You can perform more detailed setting in various items.
J OSD DESIGN
You can change the background colour of the
menu. Press IH to select the required option.
J SXGA MODE
You can switch the setting between SXGA and the
larger setting, SXGA+. Press IH to select the
required option.
J XGA MODE
You can switch the setting between XGA and the
wider setting, WXGA. Press IH to select the
required option.
J BLACKBOARD
You can exclude the BLACKBOARD in menu
items of PICTURE MODE in PICTURE menu.
Press IH to select the required option.
ONInclude the BLACKBOARD in menu
items.
OFFExclude the BLACKBOARD in menu
items.
J BACK COLOR
You can choose a BLUE or BLACK screen for
when the projector is idle. Press IH to select the
required option.
J VOLUME
You can adjust the volume of the built-in monaural
speaker and VARIABLE AUDIO OUT terminal.
IDecrease
HIncrease
J AUDIO BALANCE
You can adjust to hear the sound played equally
through both right and left external stereo
speakers, or shift the balance so more sound plays
through the left or right side.
IMore sound plays through the left
side
HMore sound plays through the right
side
J INITIALIZE ALL
You can reset all of the customised settings to the
factory defaults except NETWORK, LAMP
RUNTIME and FILTER REMAINING menu
settings.
You can reset all of the customised settings to the
factory defaults except LAMP RUNTIME and
FILTER REMAINING menu settings.
1.Press the ENTER button
2.Turn off the projector by pressing the POWER
button.
3.Switch off the MAIN POWER button to reset the
projector.
4.The minimum required setting screen will be
displayed.
See “Minimum required setting screen” on page 12.
HIGHLAND
NOTE:
•At 1400 m (4 593 ft) above sea level, the setting must
be ON.
•The loudness of fan noise depends on the HIGHLAND
setting.
TEST PATTERN
NOTE:
•When the projector and/or the screen is tilted, adjust
the focus at the centre of the image. The upper and
lower edge might be out of focus.
•When the image is distorted in keystone, adjust the
KEYSTONE in POSITION menu.
DETAILED SETUP
TYPE1Semi transparent black
TYPE2Solid blue
TYPE3Semi transparent dark blue
Manual
View the manual for the Panasonic PT-F100NTE here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 9.4. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-F100NTE or do you need help? Ask your question here
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0