Panasonic PT-F100NTE manual

Panasonic PT-F100NTE
9.4 · 1
PDF manual
 · 56 pages
English
manualPanasonic PT-F100NTE

ENGLISH - 36

Settings

OPTION menu

When you change the input method, the guidance
appears in the upper right corner of the screen. The
following display methods are available. Press I H to
cycle through the options.
You can switch the logo on/off that is displayed when
starting up the projector. Press I H to select the
required option. STARTUP LOGO will be displayed for
30 seconds.
ON Active
OFF Deactive
USER Display the original text
Q Editing the original text
If you select USER, you can display the 2 lines of
original text up to 40 characters in 1 line instead of
the logo.
1. Select USER and press ENTER.
2. Select the required line to enter or edit the original
text, and press ENTER.
3. Use F G I H to specify the location of the
required character and press ENTER.
The selected character will be displayed in the box.
Select DELETE to delete the last entered character
and press ENTER.
4. Repeat the step 3 until you finish the text to display
in a line.
5. Select OK and press ENTER to set the entered
text in a box.
Press G and edit the TEXT2 if you need to, and
repeat the step 3 - 5.
You can switch the function of the COMPUTER2 IN/
1OUT terminal.
INPUT COMPUTER2 IN
OUTPUT COMPUTER1 OUT
You can change the pace of the ARF (Auto Rolling Filter)
performance for the use environment. Press I H to
select the required option.
1 Ventilated with indoor air (e.g. small
office room)
2 Ventilated with outdoor air (e.g. large
office room, class room)
3 Public indoor space (e.g. restaurant,
building lobby)
You can check the remaining amount of the ARF (Auto
Rolling Filter). The colour of the bar scale is indicating
the condition of the ARF.
Yellow The filter remaining amount is getting
low.
Red No more remaining.

INPUT GUIDE

Options Function
OFF Turn off the guidance.
SIMPLE
Display the input method by text.
The INPUT GUIDE will go out after
5 seconds without any operation.
DETAILED
Display the input method by graphic.
The INPUT GUIDE will go out after
10 seconds without any operation.
If you select any COMPUTER
terminal which has no signal, the
computer connection guidance will
be displayed. See “Computer
connection guidance” on page 48.

STARTUP LOGO

Remote control Control panel
See “Navigating through the MENU” on page 29.
See “Main menu and Sub-menu” on page 30.
OK CANCEL
DELETE
TEXT CHANGE

COMPUTER2 SELECT

FILTER SETUP

NOTE:
•The ARF is a nonreusable product.
Select the most suitable option for the use environment.
If you select an unsuitable option, it may greatly affect
on the duration of the projector life.

FILTER REMAINING

NOTE:
See “Replacing the ARF (Auto Rolling Filter)” on
page 42.
After you replace the ARF, FILTER REMAINING should
be reset to “0” by pressing the ENTER button for
3 seconds.

Manual

View the manual for the Panasonic PT-F100NTE here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 9.4. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-F100NTE or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Panasonic and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Panasonic PT-F100NTE specifications

Below you will find the product specifications and the manual specifications of the Panasonic PT-F100NTE.

General
BrandPanasonic
ModelPT-F100NTE
Productvideo projector
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Panasonic PT-F100NTE below.

Is the manual of the Panasonic PT-F100NTE available in English?

Yes, the manual of the Panasonic PT-F100NTE is available in English .

Is your question not listed? Ask your question here

No results