If the projector is aligned non-perpendicularly to the
screen, or if the projection screen has an angled surface,
you can correct keystone.
You can move the projected image for fine adjustment.
Press IH to move horizontally and FG vertically.
(Available with signals from VIDEO/S-VIDEO/
COMPUTER/COMPONENT only)
If you have interference patterns of the projected image,
which is sometimes referred to as moire or noise, you
can minimize it by pressing IH to adjust the clock
frequency. (Available with signals from COMPUTER
only)
If you require further adjustment for the same reason as
the DOT CLOCK adjustment, you can fine adjust the
timing of the clock. Press IH to adjust. (Available with
signals from COMPUTER/COMPONENT only)
You can switch the aspect ratio manually when needed.
Press IH to cycle through the options.
Q 4:3
The input signal will be projected without any
change.
KEYSTONE
ImageOperation
NOTE:
•You can correct the distortion ± 30 degrees from the
plane. For a better quality image, installing the projector
with a minimum of distortion is recommended.
•Some distortion may be retained for lens shift
adjustment.
•The distortion of the Main menu screen is not
correctable.
•The result of the keystone correction will affect the
aspect ratio and the size of the image.
POSITION
Remote controlControl panel
See “Navigating through the MENU” on page 29.
See “Main menu and Sub-menu” on page 30.
POSITION
H
V
DOT CLOCK
NOTE:
•If the projecting signal’s dot clock frequency is higher
than 108 MHz, the adjustment may not make a
difference.
•DOT CLOCK needs to be adjusted before adjusting the
CLOCK PHASE.
CLOCK PHASE
NOTE:
•If the projecting signal’s dot clock frequency is higher
than 108 MHz, the adjustment may not make a
difference.
ASPECT
4:3
16:9
AUTO
S4:3
Manual
View the manual for the Panasonic PT-F100NTE here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 9.4. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-F100NTE or do you need help? Ask your question here
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0