Panasonic PT-F100NTE manual

Panasonic PT-F100NTE
9.4 · 1
PDF manual
 · 56 pages
English
manualPanasonic PT-F100NTE
Basic Operation

Remote control operation

ENGLISH - 26

You can switch the input method manually by
pressing the COMPUTER, NETWORK
(PT-F100NTE only) and VIDEO buttons.
Press the required button several times or I
H to cycle through the input methods as
follows. The actual projected image will be
changed in a while.
The graphical guidance will be displayed on the upper
right of the projected image and you can confirm the
selected input method which is highlighted in yellow. See
“INPUT GUIDE” on page 36.

J Pressing the COMPUTER button

J Pressing the NETWORK button

The NETWORK button is only for PT-F100NTE.
See CD-ROM contents for more detailed information.

J Pressing the VIDEO button

J Pressing the INPUT SELECT

button on the projector

You can highlight items on the screen with
the red laser pointer while projecting the
image in presentations or visual
demonstrations as an eye-catching pointing
device.
Hold down the LASER button to goes on the
laser pointer and release to goes off.

J Deactivating the LASER button

You can deactivate the LASER button for an
accidental operation.
1. Open the battery compartment cover of the
Remote control.
2. Slide the switch tab.
3. Close the battery compartment cover of the
Remote control.
See “Battery compartment” on page 13.

Switching the input signal

NOTE:
Only when the COMPUTER2 SELECT is set to INPUT,
you can switch between COMPUTER1 and
COMPUTER2.
COMPUTER1
COMPUTER2
VIDEO
S-VIDEO
COMPONENT
COMPUTER1
NETWORK
COMPONENT
S-VIDEO
VIDEO
NETWORK is only for PT-F100NTE.
COMPUTER2
NOTE:
If you select an unplugged input method, the guidance will blink on and off several times.
See “List of compatible signals” on page 46.
See “Connections” on page 20.

Using the laser pointer

NOTE:
The laser pointer should never be projected directly into
the eyes of a person or animal.
Do not aim the laser at reflective surfaces.
Do not allow children to use laser pointer.
Never look directly into the laser beam.
The laser pointer is not effective with translucent
screens.
Please read the cautions on the Remote control.
This is a Class 2 laser product.
CAUTION: Use of controls of adjustments or performance
of procedures other than those specified herein may result in
hazardous radiation exposure.
On
Off
Deactivating switch Top view
Laser pointer beam emitter
Cautions

Manual

View the manual for the Panasonic PT-F100NTE here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 9.4. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-F100NTE or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Panasonic and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Panasonic PT-F100NTE specifications

Below you will find the product specifications and the manual specifications of the Panasonic PT-F100NTE.

General
BrandPanasonic
ModelPT-F100NTE
Productvideo projector
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Panasonic PT-F100NTE below.

Is the manual of the Panasonic PT-F100NTE available in English?

Yes, the manual of the Panasonic PT-F100NTE is available in English .

Is your question not listed? Ask your question here

No results