Panasonic PT-DZ6710E manual

Panasonic PT-DZ6710E
8.2 · 1
PDF manual
 · 42 pages
English
manualPanasonic PT-DZ6710E

Precautions with regard to safety

ENGLISH - 9

Important
Information
Do not reach for the openings beside the optical
lens, during horizontal or vertical movements of the
lens.
Failure to observe this may cause injury.
Replacement of the lamp unit should only be carried
out after it has completely cooled off.
Failure to observe this may cause burns.
We are constantly making efforts to preserve and maintain a clean environment. Please take non repairable
units back to your dealer or a recycling company.
Do not subject the projector to excessive vibration
or shocks.
The projector lens need to be handled with care.
Cover the lens with the lens cover when transporting
the projector.
When transporting the projector, hold the body at
the bottom securely.
Do not hold the adjuster legs or the top cover to move
the projector, as this may damage the projector.
Be sure to always remove the lens during transport.
The projection lens is susceptible to vibrations and
impacts.
Avoid setting up in places which are subject to
vibration or shocks.
The internal parts can be damaged, which may cause
malfunctions or accidents.
Avoid setting up in places which are subject to
sudden temperature changes, such as near an air
conditioner or lighting equipment.
The life of the lamp may be shortened or the projector
may be turned off. See “TEMP indicator” on page 28.
Do not set up the projector near high-voltage power
lines or near motors.
The projector may be subject to electromagnetic
interference.
If installing the projector to the ceiling, ask a
qualified technician to carry out all installation work.
You will need to purchase the separate installation kit
(Model No. ET-PKD56H, ET-PKD55S). Furthermore,
all installation work is should only be carried out by a
qualified technician.
If using this projector at high elevations 1 400 -
2 700 m (4 593 - 8 858 ft) sea level, set the HIGH
ALTITUDE MODE to ON.
Failure to observe this may result in malfunctions or
the life of the lamp or the other components may be
shortened.
Be sure to install the projection lens cover after
installing the projection lens.
If this not done, dust will collect inside the projector
and problems with the projector will result.
In order to get the best picture quality
Draw curtains or blinds over any windows and turn off
any lights near the screen to prevent outside light or
light from indoor lamps from shining onto the screen.
In rare cases, wafture can occur on the screen
affected by the warm air from the exhaust port
depending on the environment. Make sure that there
is no equipment in front of the set which will
recirculate the exhaust air from the set or other
nearby equipment.
Do not touch the surfaces of the lens or the front
glass with your bare hands.
If the surface of the lens becomes dirty from
fingerprints or anything else, this will be magnified
and projected onto the screen. Moreover, when not
using the projector, close the front panel cover.

Cautions when transporting

Cautions when installing

Cautions on use

Manual

View the manual for the Panasonic PT-DZ6710E here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 8.2. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-DZ6710E or do you need help? Ask your question here

Need help?

Do you have a question about the Panasonic and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Panasonic PT-DZ6710E specifications

Below you will find the product specifications and the manual specifications of the Panasonic PT-DZ6710E.

General
BrandPanasonic
ModelPT-DZ6710E | PT-DZ6710E
Productvideo projector
EAN5025232492282, 5052179605420
LanguageEnglish
FiletypeUser manual (PDF)
Projector
Projector brightness6000 ANSI lumens
Projection technologyDLP
Projector native resolutionWUXGA (1920x1200)
Contrast ratio (typical)2000:1
Uniformity90 %
Vertical scan range50 - 85 Hz
Horizontal scan range15 - 91 kHz
Screen size compatibility50 - 600 "
Projection distance- m
Other features
Aspect ratio16:10
RS-232 ports1
Dimensions (WxDxH)498 x 440 x 175 mm
Non-operating relative humidity (non-condensing)20 - 80 %
Connectivity technologyWired
Power requirements220 – 240 V AC 50/60 Hz
Video inBNC
Light source
Lamp power300 W
Lamp typeUHM
Service life of light source- h
Light source typeLamp
Features
Dot clock scanning frequency162 MHz
Noise level- dB
Video
Full HDYes
Analog signal format systemNTSC, PAL, SECAM
3D-
Ports & interfaces
VGA (D-Sub) ports quantity2
S-Video inputs quantity1
Component video (YPbPr/YCbCr) in2
DVI portYes
Composite video in-
Audio (L/R) in-
USB 2.0 ports quantity-
HDMI ports quantity-
Serial interface typeRS-232
Network
Ethernet LAN (RJ-45) ports1
Ethernet LANYes
Wi-Fi-
Weight & dimensions
Weight16000 g
Power
Power consumption (typical)800 W
Power consumption (standby)9 W
Operational conditions
Operating temperature (T-T)0 - 45 °C
Packaging content
Handheld remote controlYes
Lens system
Zoom ratio-
Focal length range- mm
Multimedia
Built-in speaker(s)-
Design
Product colorBlack
PlacementCeiling
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Panasonic PT-DZ6710E below.

What is the weight of the Panasonic PT-DZ6710E?

The Panasonic PT-DZ6710E has a weight of 16000 g.

Is the manual of the Panasonic PT-DZ6710E available in English?

Yes, the manual of the Panasonic PT-DZ6710E is available in English .

Is your question not listed? Ask your question here

No results