Panasonic PT-DZ6710E manual

Panasonic PT-DZ6710E
8.2 · 1
PDF manual
 · 42 pages
English
manualPanasonic PT-DZ6710E

ENGLISH - 33

Maintenance

Troubleshooting

Should any problem persist, contact your dealer.
Problem Cause
Reference
page
*1
*1. CD-ROM: See the functional instructions in the provided CD-ROM.
Power does not turn on.
The mains lead may not be connected.
The POWER switch is turned off.
No electric supply is at the mains socket.
TEMP indicator is lit or flashes.
LAMP1/LAMP2 indicator is lit or flashes.
The lamp unit cover has not been securely installed.
The circuit breakers have tripped.
18
19
19
28
28
31
-
No picture appears.
The video signal input source may not be connected to a terminal
properly.
The input selection setting may not be correct.
The BRIGHTNESS adjustment setting may be at the minimum setting.
The input source which is connected to the projector may have a
problem.
The shutter function may be in use.
The ACF unit may not have been set correctly.
CD-ROM
22
CD-ROM
22
32
The picture is fuzzy.
The lens focus may not have been set correctly.
The projector may not be at the correct distance from the screen.
The lens may be dirty.
The projector may be tilted too much.
19
CD-ROM
-
CD-ROM
The colour is pale or
greyish.
COLOR or TINT adjustment may be incorrect.
The input source which is connected to the projector may not be
adjusted correctly.
RGB cable is damaged.
CD-ROM
-
-
The control buttons of the
projector do not operate.
CONTROL PANEL of CONTROL DEVICE SETUP in SECURITY
menu is disabled. If you have a loss of the remote control while the
CONTROL PANEL is disabled, press and hold the MENU button for
2 seconds with pressing the ENTER button.
CD-ROM
The remote control does
not operate.
REMOTE CONTROLLER of CONTROL DEVICE SETUP in
SECURITY menu is disabled.
The batteries may be weak.
The batteries may not have been inserted correctly.
The remote control signal receptor on the projector may be
obstructed.
The remote control unit may be out of the operation range.
Strong light such as fluorescent shine onto the signal receptor.
The remote control ID setting is incorrect.
CD-ROM
-
14
21
21
-
CD-ROM
On screen menu does not
appear.
ON SCREEN button on the remote control may have been pressed
and cleared.
22
The picture does not
display correctly.
The colour format may not have been set correctly.
There may be a problem with the VCR or other signal source.
A signal which is not compatible with the projector is being input.
CD-ROM
-
34
Picture from a computer
does not appear.
The cable may be longer than the optional cable.
The external video output from a laptop computer may not be correct.
(You may be able to change the external output settings by pressing
the [Fn] + [F3] or [Fn] + [F10] keys simultaneously. The actual method
varies depending on the type of computer; refer to the documentation
provided with your computer for further details.)
-
-
Picture from a computer
DVI-D graphic board does
not appear.
The graphic board driver of the computer needs to be updated to the
latest version.
DVI-D IN setting in DISPLAY OPTION menu may be incorrect setting.
The computer may need to be restarted after switching DVI-D IN
setting in DISPLAY OPTION menu of the projector correctly.
-
CD-ROM
-

Manual

View the manual for the Panasonic PT-DZ6710E here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 8.2. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-DZ6710E or do you need help? Ask your question here

Need help?

Do you have a question about the Panasonic and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Panasonic PT-DZ6710E specifications

Below you will find the product specifications and the manual specifications of the Panasonic PT-DZ6710E.

General
BrandPanasonic
ModelPT-DZ6710E | PT-DZ6710E
Productvideo projector
EAN5025232492282, 5052179605420
LanguageEnglish
FiletypeUser manual (PDF)
Projector
Projector brightness6000 ANSI lumens
Projection technologyDLP
Projector native resolutionWUXGA (1920x1200)
Contrast ratio (typical)2000:1
Uniformity90 %
Vertical scan range50 - 85 Hz
Horizontal scan range15 - 91 kHz
Screen size compatibility50 - 600 "
Projection distance- m
Other features
Aspect ratio16:10
RS-232 ports1
Dimensions (WxDxH)498 x 440 x 175 mm
Non-operating relative humidity (non-condensing)20 - 80 %
Connectivity technologyWired
Power requirements220 – 240 V AC 50/60 Hz
Video inBNC
Light source
Lamp power300 W
Lamp typeUHM
Service life of light source- h
Light source typeLamp
Features
Dot clock scanning frequency162 MHz
Noise level- dB
Video
Full HDYes
Analog signal format systemNTSC, PAL, SECAM
3D-
Ports & interfaces
VGA (D-Sub) ports quantity2
S-Video inputs quantity1
Component video (YPbPr/YCbCr) in2
DVI portYes
Composite video in-
Audio (L/R) in-
USB 2.0 ports quantity-
HDMI ports quantity-
Serial interface typeRS-232
Network
Ethernet LAN (RJ-45) ports1
Ethernet LANYes
Wi-Fi-
Weight & dimensions
Weight16000 g
Power
Power consumption (typical)800 W
Power consumption (standby)9 W
Operational conditions
Operating temperature (T-T)0 - 45 °C
Packaging content
Handheld remote controlYes
Lens system
Zoom ratio-
Focal length range- mm
Multimedia
Built-in speaker(s)-
Design
Product colorBlack
PlacementCeiling
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Panasonic PT-DZ6710E below.

What is the weight of the Panasonic PT-DZ6710E?

The Panasonic PT-DZ6710E has a weight of 16000 g.

Is the manual of the Panasonic PT-DZ6710E available in English?

Yes, the manual of the Panasonic PT-DZ6710E is available in English .

Is your question not listed? Ask your question here

No results