You can use the remote control to switch the signals that are being input and projected.
If the projector is not used for a certain period of time during the meeting intermission, for example, a shutter mode is
available that allows the user to hide images temporarily.
Press the SHUTTER button to block the projected light by the internal shutter, and press again to resume.
Press the ON SCREEN button to clear the on-screen menus to avoid disrupting the program.
Press the ON SCREEN button again to displays
You can toggle through an appropriate set of aspect ratios for a given input signal. The setting will change each time the
ASPECT button is pressed.
Appearance sample
S-VIDEO signal
VID AUTOHS1 AUTOHVID AUTO(PRI.)HTHROUGHH16:9H4:3HH-FITHV-FITHHV-FITHVID AUTO
The projector has 7 types of internal test patterns to check the condition of the set.1. Display an input signal image.2. Press the TEST PATTERN button.
3.Press IH to select the required test pattern.
Switching the input signal
RGB1Switches to RGB 1 IN.
RGB2Switches to RGB 2 IN.
DVI-DSwitches to DVI-D IN.
VIDEOSwitches to VIDEO IN.
S-VIDEOSwitches to S-VIDEO IN.
SDI
*1
*1.SDI is only for PT-DZ6710E.
Switches to SDI IN.
Stopping the projection
Clearing the on-screen menu
Changing the picture aspect ratio
NOTE:
•The appearance of setting options vary according to input signals. See ASPECT in POSITION menu of the functional instructions that is
in the provided CD-ROM.
Displaying the internal test pattern
NOTE:
•See TEST PATTERN menu of the functional instructions that is in the provided CD-ROM.
Manual
View the manual for the Panasonic PT-DZ6710E here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 8.2. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-DZ6710E or do you need help? Ask your question here
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0