Before using the DHCP server, make sure the DHCP •
server is already functioning.
For details of IP address, subnet mask, and •
gateway, ask the network administrator.
Network control
This sets the network control method.
Press ▲▼ to select “NETWORK 1.
CONTROL”.
NETWORK SETUP
NETWORK CONTROL
NETWORK STATUS
Press ENTER.2.
The “NETWORK CONTROL” screen will be •
displayed.
NETWORK CONTROL
WEB CONTROL
WEB PORT
PJLink CONTROL
COMMAND CONTROL
COMMAND PORT
STORE
ON
80
OFF
OFF
1024
Press ▲▼ to select items, and 3.
press ◄► to change the setting.
WEB CONTROL:•
Set this to ON when you want to perform
control with the Web browser. (pp. 93-104)
WEB PORT:•
Set the port number to use.
PJLink CONTROL:•
Set this to ON when you want to perform
control with the PJLink protocol. (p. 105)
COMMAND CONTROL:•
Set to ON to control using the control
command via the serial terminal. (pp.106-109)
If settings have been made without an
administrator password of the Web browser
control, add 2-byte “00” instead of STX,
and a line-feed code (0Dh) instead of ETX. If
settings have been made with an administrator
password of the Web browser control, add a
32-byte hash value and “00” instead of STX
and a line-feed code (0Dh) instead of ETX.
The hash value is created by MD5 combining
“admin1:”, password, “:” and random numbers.
The random numbers are 8-byte values sent
from the projector when connecting.
COMMAND PORT:•
Set the port number used for the command
control.
STORE:•
Save the current network control settings.
Network status
This displays the network status of the main unit.
Press ▲▼ to select “NETWORK 1.
STATUS”.
NETWORK SETUP
NETWORK CONTROL
NETWORK STATUS
Press ENTER.2.
The “NETWORK STATUS” screen will be •
displayed.
NETWORK STATUS
DHCP
IP ADDRESS
SUBNET MASK
GATEWAY
DNS1
DNS2
MAC ADDRESS
OFF
192. 168. 0. 8
255. 255. 255. 0
192. 168. 0. 1
0. 0. 0. 200
0. 0. 0. 0
00:0B:97:41:03:05
Returning the network function
setting back to the factory setting
Network function settings such as the IP address,
password, and e-mail settings can be return to
their factory settings with the initialize menu of the
projector setup. (p. 84)
Manual
View the manual for the Panasonic PT-DZ12000E here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 5.5. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-DZ12000E or do you need help? Ask your question here
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0