Panasonic PT-DZ12000E manual

Panasonic PT-DZ12000E
5.5 · 1
PDF manual
 · 128 pages
English
manualPanasonic PT-DZ12000E

74

ENGLISH

Display Option settings (continued)

AUX DVI IN (Only when the

ET-MD77DV is installed)

Change this setting if video does not display normally
when the ET-MD77DV and an external device are
connected via DVI-D.
Press ▲▼ to select “AUX DVI IN”.
1.
DVI-D IN
AUX DVI IN
AUX SDI IN
Press ENTER.2.
The “AUX DVI IN” screen will be displayed.
AUX DVI IN
AUX DVI EDID
AUX DVI SIGNAL LEVEL
EDID1
0-255:PC
Press ◄► to switch “AUX DVI 3.
EDID”.
The setting will change as follows each time
◄► is pressed.
EDID1 EDID2(PC)
EDID1 (Input signal formats supported) :
Mainly select this when an external device (DVD
player, etc.) for outputting video signals of a moving
image system is connected to AUX DVI IN.
EDID2 (Input signal formats supported) :
Mainly use this when an external device (PC, etc.)
for outputting video signals of a still image system
is connected to AUX DVI IN.
Press ◄► to switch “AUX DVI 4.
SIGNAL LEVEL”.
The setting will change as follows each time
◄► is pressed.
0-255:PC 16-235
0-255:PC :
Select this when, for example, an external device
(PC, etc.) is connected via the DVI terminal output.
16-235 :
Select this when, for example, an external device
(DVD player, etc.) is connected via the HDMI
terminal output using a conversion cable.
Note
The optimal setting differs depending on the output
setting of the connected external device. Refer to
the instruction manual of the external device.
If the setting is changed, the data for plug and
play changes. For the plug and play compatible
resolutions, check the compatible signal list
(pp. 122-123).

AUX SDI IN

Set this in accordance with the input module (sold
separately).
Press ▲▼ to select “AUX SDI 1.
IN”.
AUX DVI IN
AUX SDI IN
ON-SCREEN DISPLAY
Press ENTER.2.
The “AUX SDI IN” screen will be displayed.
AUX SDI IN
SDI LINK
BIT DEPTH(DUAL LINK)
SDI SIGNAL LEVEL
AUTO
AUTO
64-940
Press ▲▼ to select the desired 3.
item, and press ◄► to change
the setting.
SDI LINK z
Select the single link signal type or dual link signal
type. The setting will change as follows each time
the button is pressed.
SINGLE LINKAUTO
DUAL LINK
AUTO:
Selects the setting automatically.
SINGLE LINK:
Fixes the setting to signal link signal.
DUAL LINK:
Fixes the setting to dual link signal.
BIT DEPTH (DUAL LINK) z
Select the gradation for the signals to be input.
This is only valid when dual link RGB input. The
setting will change as follows each time the button
is pressed.
12-bitAUTO
10-bit
AUTO:
Selects 12-bit or 10-bit automatically.
12-bit:
Fixes the setting to 12-bit.
10-bit:
Fixes the setting to 10-bit.

Manual

View the manual for the Panasonic PT-DZ12000E here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 5.5. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-DZ12000E or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Panasonic and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Panasonic PT-DZ12000E specifications

Below you will find the product specifications and the manual specifications of the Panasonic PT-DZ12000E.

General
BrandPanasonic
ModelPT-DZ12000E | PT-DZ12000E
Productvideo projector
EAN5052178257828
LanguageEnglish
FiletypeUser manual (PDF)
Projector
Projector brightness12000 ANSI lumens
Projection technologyDLP
Projector native resolutionWUXGA (1920x1200)
Contrast ratio (typical)5000:1
Projection distance1.1 - 103.3 m
Number of colors16.78 million colors
Vertical scan range24 - 120 Hz
Horizontal scan range15 - 100 kHz
Other features
Aspect ratio16:10
RS-232 ports1
Dimensions (WxDxH)578 x 320 x 643 mm
Light source
Lamp power300 W
Lamp typeUHM
Light source typeLamp
Ports & interfaces
VGA (D-Sub) ports quantity1
S-Video inputs quantity1
Composite video in1
DVI portYes
Serial interface typeRS-232
Network
Ethernet LAN (RJ-45) ports1
Weight & dimensions
Weight35000 g
Power
Power consumption (typical)1500 W
Operational conditions
Operating relative humidity (H-H)10 - 80 %
Operating temperature (T-T)0 - 45 °C
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Panasonic PT-DZ12000E below.

What is the weight of the Panasonic PT-DZ12000E?

The Panasonic PT-DZ12000E has a weight of 35000 g.

Is the manual of the Panasonic PT-DZ12000E available in English?

Yes, the manual of the Panasonic PT-DZ12000E is available in English .

Is your question not listed? Ask your question here

No results