projector allows the user to correct the difference of
colours among the sets.
Press ▲▼ to select “COLOR 1. MATCHING”.
DISPLAY OPTION
COLOR MATCHING
LARGE SCREEN CORRECTION
OFF
OFF
Press ◄► to switch “COLOR 2. MATCHING”.
The setting will change as follows each time •
◄► is pressed.
OFF3COLORS
MEASURED
7COLORS
709MODE
OFF:•
Colour matching adjustment is not carried out.
3COLORS:•
It is possible to adjust the 3colours of “RED”,
“GREEN” and “BLUE”.
7COLORS:•
It is possible to adjust the 7colours of “RED”,
“GREEN”, “BLUE”, “CYAN”, “MAGENTA”,
“YELLOW” and “WHITE”.
709MODE:•
Refer to “Adjusting the colour matching using a
colorimeter” on the next page for details on this
mode.
MEASURED:•
Refer to “Adjusting the colour matching using a
colorimeter” on the next page for details on this
mode.
If “3COLORS” or “7COLORS”
was selected in step 2.Press ENTER.3.
The “3COLORS” or “7COLORS” screen will be •
displayed.
3COLORS
RED
GREEN
BLUE
AUTO TESTPATTERN
ON
Press ▲▼ to select “RED”, 4. “GREEN” and “BLUE” (if “7COLORS” was selected, select “RED”, “GREEN”, “BLUE”, “CYAN”, “MAGENTA”, “YELLOW”, and “WHITE”).
▲▼◄►
ENTER
DEFAULT
MENU
This menu can be used to make a variety of
picture and projector settings.
MENU
Press to display the MAIN
MENU screen.
Press to select
“DISPLAY OPTION”.
Press to display the
“DISPLAY OPTION” menu.
ENTER
MAIN MENU
PICTURE
POSITION
ADVANCED MENU
DISPLAY LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
P IN P
TEST PATTERN
SIGNAL LIST
SECURITY
NETWORK
MENU SELECT
SUB MENU
Manual
View the manual for the Panasonic PT-DZ12000E here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 5.5. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-DZ12000E or do you need help? Ask your question here
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0