fThe items will switch each time you press the button.
[EDID3]Recognizes movie-based video signals and still image signals automatically.
[EDID1]
Select mainly when an external device that outputs movie-based video signals (such as a blu-ray disc
player) is connected to the <DVI-D IN> terminal.
[EDID2:PC]
Select mainly when an external device that outputs still image signals (such as a computer) is
connected to the <DVI-D IN> terminal.
5) Press as to select [SIGNAL LEVEL].
6) Press qw to switch the item.
fThe items will switch each time you press the button.
[AUTO]Automatically sets the signal level.
[0-255:PC]Select when an external device (such as a computer) is connected via the DVI-D terminal output.
[16-235]
Select when an external device (such as a blu-ray disc player) is connected via the HDMI terminal
output using a conversion cable, etc.
Note
fThe optimal setting varies depending on the output setting of the connected external device. Refer to the operating instructions of the
external device regarding the output of the external device.
fThe data for Plug and play will change when the setting is changed. Refer to “List of compatible signals” (x page 178) for a resolution that
supports plug and play.
[HDMI IN]
Switch the setting when the external device is connected to the <HDMI IN> terminal of the projector and the image is not projected correctly.
1) Press as to select [HDMI IN].
2) Press the <ENTER> button.
fThe [HDMI IN] screen is displayed.
3) Press qw to switch the [SIGNAL LEVEL] item.
fThe items will switch each time you press the button.
[AUTO]Automatically sets the signal level.
[64-940]
Select when the HDMI terminal of an external device (such as a blu-ray disc player) is connected to
the <HDMI IN> terminal.
[0-1023]
Select when the DVI-D terminal output of an external device (such as a computer) is connected to the
<HDMI IN> terminal via a conversion cable or similar cable.
Select also when the HDMI terminal output of a computer or other device is connected to the <HDMI
IN> terminal.
Note
fThe optimal setting varies depending on the output setting of the connected external device. Refer to the operating instructions of the
external device regarding the output of the external device.
fThe displayed signal level is assumed when the input is 30 bits.
[DIGITAL LINK IN]
Set the signal level when DIGITAL LINK input is selected.
1) Press as to select [DIGITAL LINK IN].
2) Press the <ENTER> button.
fThe [DIGITAL LINK IN] screen is displayed.
3) Press qw to switch [SIGNAL LEVEL].
fThe items will switch each time you press the button.
Manual
View the manual for the Panasonic PT-DX100EWJ here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 6.9. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-DX100EWJ or do you need help? Ask your question here
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0