6) Measure the current luminance (Y) and the chromaticity coordinates (x, y) using the colorimeter.
7) Press as to select a color, and press qw to adjust the setting.
fSet [AUTO TESTPATTERN] to [ON] to display a test pattern of selected colors.
8) Once all the input is completed, press the <MENU> button.
fThe [MEASURED MODE] screen is displayed.
9) Press as to select [TARGET DATA].
10) Press the <ENTER> button.
fThe [TARGET DATA] screen is displayed.
11) Press as to select a color and press qw to input coordinates for desired colors.
fSet [AUTO TESTPATTERN] to [ON] to display a test pattern of selected colors.
12) Once all the input is completed, press the <MENU> button.
Note
fColors are not displayed properly when target data is a color outside the region of this projector.
fSet the [AUTO TESTPATTERN] to [ON] to automatically display a test pattern for use in adjusting the selected adjustment colors.
fWhen using a colorimeter or similar instrument to measure measurement data, measure the colors displayed with [AUTO TESTPATTERN].
fA difference in the color coordinates of target data and measurement values obtained from an instrument may occur for certain instruments
and measurement environments used.
[COLOR CORRECTION]
Colors can be adjusted and registered for each input signal format.
1) Press as to select [COLOR CORRECTION].
2) Press qw to switch the item.
fThe items will switch each time you press the button.
[OFF]Standard setting
[USER]
For each of the following four signal formats: VIDEO, Y/C, RGB, and YC
B
C
R
/YP
B
P
R
, six colors of red,
green, blue, cyan, magenta, and yellow can be adjusted and registered. Press the <ENTER> button
to set the details. Adjustment is possible within the range of
-
31 - +31.
[SCREEN SETTING]
Set the screen size.
When changing the aspect of a projected image, correct to the optimum image position for the set screen. Set as necessary for the screen in
use.
1) Press as to select [SCREEN SETTING].
2) Press the <ENTER> button.
fThe [SCREEN SETTING] screen is displayed.
3) Press qw to switch the [SCREEN FORMAT] item.
fThe items will switch each time you press the button.
Model No.[SCREEN FORMAT]Range when [SCREEN POSITION] is selected
PT-DZ870E
[16:10]Cannot be adjusted.
[4:3]Adjusts the horizontal position between
-
160 and 160.
[16:9]Adjusts the vertical position between
-
60 and 60.
Manual
View the manual for the Panasonic PT-DX100EWJ here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 6.9. This manual is available in the following languages: English. Do you have a question about the Panasonic PT-DX100EWJ or do you need help? Ask your question here
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0